Creation of a V-Node and the Render Surface
- First add a V-Node
- Create a Render Surface about 1920×1080 (which is the default value)
- On your V-Node select this Render Surface.
- Add an Output about 1920×1080 to the V-Node (which is the default value)
By default the extracted map area should be good : top,left: 0,0 and size: 1920×1080 and the out area: top,left: 0,0 and size: 1920×1080.
- Go to the shape subtab and display a test pattern grid.
Activate the demo Output
- Be sure your projector is connected and set to the good input
- Check that your laptop is correctly set to Extend these displays (not the Duplicate mode)
- On Kinetic Designer, right click on the Output you just created and Display on side screen
Need more help with this?
Don’t hesitate to contact us here.
Thanks for your feedback.