Choose this device to control Barco Encore series.
|Enable||Activate to enable the device|
|Run at startup||Activate to run the device at Kinetic startup|
|IP||Enter the ip address of your device. Your device and Kinetic Designer need to be in the same subnet|
|Port||Choose port number. Port. 3000 is the default value (usually doesn’t have to be changed)|
|Enable device||enable the device|
|Disable device||disable the device|
|Take||send take command|
|Take Time (1/10s)||send take command with specified time|
|Recall Preset||recall preset index|
Go to the manufacturer website for more information.
Need more help with this?
Don’t hesitate to contact us here.
Thanks for your feedback.