Search
Related topics are listed below.
Distance sensor (0-200mm)
Kinetic Designer: User Interface » Devices » Phidgets » Distance sensor (0-200mm)
Choose this device to connect to a Phidgets Distance sensor DST1000_0 You can the measure the distance with this infrared sensor from 0mm to 170mm. Settings: Name User-friendly name Enable Activate to enable the device Run at…
RenderSurface source creation
Tutorials – English » Training tutorials » Live Event » Live event Part 3 : Mixer » RenderSurface source creation
Now let’s create a source and extract a portion of our RenderSurface. In the Edit tab, click on + to create a new source. Name it BACKGROUND. In the Editor panel set the Input type to Render Surface and in the second drop-down menu select your render…
Ajout de source render surface
Tutoriels – Français » Tutoriels de formation » Live Event » Live event Part 3-Mixer » Ajout de source render surface
Nous allons maintenant ajouter une source de type RenderSurface.
Appliquer un effet chromakey sur la source Deltacast
Tutoriels – Français » Tutoriels de formation » Setup a XR studio with a green screen » Mix the 3D camera POV and the real camera feed » Appliquer un effet chromakey sur la source Deltacast
Selectionner le layer Deltacast dans la timeline et dans la fenêtre Editor ajouter un Fx > Chromakey Ajuster le réglage green color Pour le Primary color, c’est mieux de choisir la couleur la plus courante au lieu d’une zone brillante ou…
Apply a chromakey FX on the Deltacast source
Tutorials – English » Training tutorials » Setup a XR studio with a green screen » Mix the 3D camera POV and the real camera feed » Apply a chromakey FX on the Deltacast source
Select the layer Deltacast in the timeline and in the Editor tab add an Fx > Chromakey Adjust the green color setting As a Primary color, it is better to choose a mean background color instead of a very light or dark one *If you really have differente green…
Live mixer – add source to the Preview and TAKE action
Tutorials – English » Training tutorials » X-Map-Letter » Live mixer – add source to the Preview and TAKE action
We will now add two sources in the SCREEN destination Then a source in the Logo destination and in the Round destination You can now press TAKE. To action the TAKE will send the Preview to the Program.
Live mixer – mettre une source au Preview et TAKE au PGM
Tutoriels – Français » Tutoriels de formation » X-Map-Letter » Live mixer – mettre une source au Preview et TAKE au PGM
Nous allons maintenant ajouter deux sources dans la destination SCREEN : Puis une source dans la destination Logo et dans la destination Round : Faire maintenant un TAKE. Actionner le TAKE enverra le contenu du Preview au Program.
L-Acoustics L-ISA Controller
Kinetic Designer: User Interface » Devices » Audio » L-Acoustics L-ISA Controller
Choose this device to connect to a L_Acoustics L-ISA controller Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup Input Enable…
Adm OSC
Kinetic Designer: User Interface » Devices » Audio » Adm OSC
Description This device connects to other devices on the network running Object Based Audio (OBA) by using the Audio Definition Model (ADM) implemented over the Open Sound Control (OSC) protocol. It can send and/or receive position data for sources. *Note : Position…
L-ISA Spatial Audio
Tutorials – English » Video tutorials » L-ISA Spatial Audio
Overview In this video tutorial, we will see how to interface Kinetic Designer with an L-ISA Controller by L Acoustic. We’ll first see how to create an L-ISA device and configure it. Then we will see how to send pan, width, distance and tracking…
Destinations
Live Mixer » Destinations
Destinations You can create any number of Destinations. Each Destination can have any number of Mix/Engine (ME). Each Mix/Engine is composed of two layers than can crossdfade from Preview to Program. Click on the +Dest button to add new Destination in your…
Vector Target
Kinetic Designer: User Interface » Graph Editor » Common Graph Nodes » Math » Vector Target
Description This node performs a vector subtraction between two vectors Source and Target. The subtraction is Target – Source and the resulting vector describes the parameters (angle and length) to go from Source to Target. Properties This node has…
PJLink
Kinetic Designer: User Interface » Devices » Projectors » PJLink
Select this device to control Panasonic video projectors and many other projector brands that support the PJLink protocol. Settings Property Default Description Name PJLink User-friendly name. Enable ON …
Preview/Program
Tutorials – English » Training tutorials » Live Event » Live event Part 3 : Mixer » Preview/Program
The Mixer works with a Preview (PVW) and a Program (PGM). *Info : Program contains the feed currently live and Preview contains the content standing-by to be sent to the Program with the CUT or TAKE actions. CUT will send the content from Preview to Program instantly,…
Barco
Kinetic Designer: User Interface » Devices » Projectors » Barco
Select this device to control Barco UDX or F-series video projectors. Settings Property Default Description Name Barco VP User-friendly name. Enable ON Toggle to enable/disable the device. Run at…
Analog Way VIO
Kinetic Designer: User Interface » Devices » Switchers » Analog Way VIO
Choose this device to control Analog Way VIO series. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup IP Enter the ip address…
Use the Mixer software to switch between Camera1 and Camera2
Tutorials – English » Training tutorials » Setup a XR studio with a green screen » Add another camera to the XR scene » Use the Mixer software to switch between Camera1 and Camera2
Use the Mixer to switch between the two cameras Open the Modulo Mixer software Enter the Designer IP Address Add 1 Destination of 1920×1080 Add 2 Sources, one for the Render Surface Camera1 and one for the Render Surface Camera2 Drag & drop the Destination…
Blob Tracker
Kinetic Designer: User Interface » Graph Editor » Common Graph Nodes » Array » Blob Tracker
Description This node detects and tracks blobs in CV images. It will output a CV Image enhanced with the detected blobs highlighted and an array containing the following informations for each blob : Coordinates, Size, Speed, Orientation, Lifetime since detection and a…
3D Projectors
Kinetic Designer: User Interface » 3D scenes » 3D Projectors
In this panel you have access to the complete list of projectors of the scene. Thanks to the toolbar you can add a projector, search by name and delete the selected projectors. In addition, you can activate or deactivate a projector by clicking directly on the…
Merge Tracking 2D
Kinetic Designer: User Interface » Graph Editor » Common Graph Nodes » Array » Merge Tracking 2D
Description This node merges two arrays into one single array, just like the Merge node. This node has many additional options and is intended for merging two-dimensional tracking data from sensors. It only considers X and Y Properties in the input arrays to…
KineMotion group editor
Kinetic Designer: User Interface » KineMotion » KineMotion group editor
Group editor is the main control point of the tracking module. It includes the following tabs: General Calib. report Ground calib. Objects Listing Filter General Mode Determines in which mode the group will operate after clicking on Start button .…
TeraBEE TeraRanger
Kinetic Designer: User Interface » Devices » Tracking » TeraBEE TeraRanger
Choose this device to measure a range with the Terabee Range sensor. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup Port …
Sonar
Kinetic Designer: User Interface » Devices » Phidgets » Sonar
Choose this device to connect to a Phidgets Sonar sensor DST1200_0 Detect several solid objects up to 10m away in a wide sensing range, or use this Phidget as an ultrasonic range finder. Settings: Name User-friendly name Enable Activate…
Export VP informations
Tutorials – English » Training tutorials » Entire project : Immersive Room Experience » Chapter 1 : Import a 3D model and make the video projection study » Export VP informations
You can find the distance between the projector lens and its projection surface by adjusting the FAR parameter on the projector. But to export a visible distance we will use the Dimension tool. Use the Annotation and Dimension tools Using the Dimension tool,…
Kinetic Designer
Kinetic Designer: User Interface » Devices » Modulo Pi Devices » Kinetic Designer
Choose this device to control a Kinetic Designer. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup IP Enter the ip address of…
3D Cameras
Kinetic Designer: User Interface » 3D scenes » 3D Cameras
In this panel you have access to the complete list of cameras of the scene. Thanks to the toolbar you can add a camera, search by name and delete the selected cameras. Settings The camera has many parameters: Position position of the…
OSC
Kinetic Designer: User Interface » Devices » Control » OSC
This device allows you to receive or send OSC message. !OSC message is an alphanumerical field starting with “/” caracter Settings: Name User-friendly name Enable Activate to enable the device Run at startup …
Mix the 3D camera POV and the real camera feed
Tutorials – English » Training tutorials » Setup a XR studio with a green screen » Mix the 3D camera POV and the real camera feed
Get the 3D camera POV Drag and drop the 3D camera named Camera_AR into the Timeline “CAMERAS” *This Camera_AR content needs to be sent to the V-Node, meaning this Camera layer needs to be placed on the Render Surface assigned to the V-Node. The…
Modulo Shortcut
Kinetic Designer: User Interface » Devices » Modulo Pi Devices » Modulo Shortcut
Choose this device to control a Modulo Shortcut and take control to your Power Point presentations. You can download Modulo Shortcut for Windows here You can download Modulo Shortcut for Mac here Settings: Name User-friendly name Enable …
Sources
Live Mixer » Sources
You can create any number of sources. Click on the + button to add new source in your project. Click on the button to delete a source. Click on this button to visualize live thumbnail stream. You can directly freeze/unfreeze a source in the list. You can…
3D Lights
Kinetic Designer: User Interface » 3D scenes » 3D Lights
In this panel you have access to the complete list of lights of the scene. Thanks to the toolbar you can add a light, search by name and delete the selected lights. Settings General Visible draws the light source, this does NOT affect the use of the…
3D Environment
Tutorials – English » Training tutorials » Architectural video mapping » Architectural 1 – Projection study and simulation » 3D Environment
Monument of 28m x 18m at its highest point. Projectors informations : Resolution : 1920×1080 Lumens : 20.000 Number of projectors ROTATED at 90 deg : 2 Distance : 30 meters Height : 9 meters Projection tower size : 3m x 3m First, adjust the layout view…
PosiStage Net Server
Kinetic Designer: User Interface » Devices » Tracking » PosiStage Net Server
Select this device to send PosiStageNet information to the tracking server. PosiStageNet is an open protocol enabling the broadcast of 3 dimensional position coordinates, velocity, orientation and acceleration data of objects tracked on…
Alpha Compositing
Kinetic Designer: User Interface » Graph Editor » Render Graph Nodes » GPU Blend » Alpha Compositing
Description This effect accepts two images as inputs and allows for a number of compositing effects to be applied on these two images. *This is one of the most fundamental nodes in the render graph and will be widely used to combine two images into a single…
Christie Digital
Kinetic Designer: User Interface » Devices » Projectors » Christie Digital
Select this device to control Christie Digital video projectors. Settings Property Default Description Name Christie Digital User-friendly name. Enable ON Toggle to enable/disable the device. Run…
Sources creation
Tutorials – English » Training tutorials » Live Event » Live event Part 3 : Mixer » Sources creation
Now let’s create our sources. *Info : There are only two kinds of source you can add : Live sources and RenderSurface sources. Live sources are live signals from a NDI feed, HDMI, SDI, etc. RenderSurface sources are content displayed on a Render Surface, which…
UDP
Kinetic Designer: User Interface » Devices » Low level protocol » UDP
Choose this device to send and receive UDP packet to/from other devices. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup IP …
Generate a dongle context file
How-To » Generate a dongle context file
You have several options to generate a dongle context file: For a VNode directly from the Modulo Kinetic Designer with the remote control panel From the Modulo Kinetic Designer or VNode (or notebook with Lite edition) !If you need to update several applications at…
Leuze ROD 4
Kinetic Designer: User Interface » Devices » LiDAR 2D » Leuze ROD 4
Description The Rod 4 is a contactless laser distance sensor for area-scanning object detection and measurement. A light beam produced by laser diodes is deflected by a rotating mirror and covers an area of 190° with a radius of up to 65 m.…
WebSocket client
Kinetic Designer: User Interface » Devices » Low level protocol » WebSocket client
Choose this device to connect to a WebSocket server. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup Url Url of your server.…
ModuloDMXTool
Companion Apps » ModuloDMXTool
ModuloDMXTool: ModuloDMXTool is free application to send and receive Art-Net DMX from/to any device. You can use this application to simulate a light desk or a light when you use the DMX device in Modulo Player or Modulo Kinetic. Download: For PC: Connect to the…
Optoma
Kinetic Designer: User Interface » Devices » Projectors » Optoma
Select this device to control Optoma video projectors. Settings Property Default Description Name Optoma User-friendly name. Enable ON Toggle to enable/disable the device. Run at startup ON …
WebSocket server
Kinetic Designer: User Interface » Devices » Low level protocol » WebSocket server
Choose this device to create a WebSocket server. other device can connect to this server. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup…
Add the second camera and configure it
Tutorials – English » Training tutorials » Setup a XR studio with a green screen » Add another camera to the XR scene » Add the second camera and configure it
Add devices for the new camera Add a new Camera AR FreeD Kinetic Device, define the Camera type to Panasonic AW-UE-150 and indicate its communication port Add a new Device PTZ camera , select Panasonic AW-HExx and enter its IP address *Because the first Camera is…
Serial
Kinetic Designer: User Interface » Devices » Low level protocol » Serial
Choose this device to control a device on a serial port. Optionally, you will need a USB to RS232 converter to connect. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run…
TCP Client
Kinetic Designer: User Interface » Devices » Low level protocol » TCP Client
Choose this device to control a device sending TCP/IP command. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup IP Enter your…
TCP Server
Kinetic Designer: User Interface » Devices » Low level protocol » TCP Server
Choose this device to create a TCP/IP server. other device can connect to this server. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup…
Point Cloud to Blob
Kinetic Designer: User Interface » Graph Editor » Compute Specific Graph Nodes » Point Cloud » Point Cloud to Blob
Description This node is designed to perform blob tracking on Point clouds. Similarly to Blob Tracker which performs blob tracking on CV Image streams, this node will output a CV Image stream displaying the detection and tracking of blobs, as well as an array…
Exporter les informations des VP
Tutoriels – Français » Tutoriels de formation » Projet entier : Immersive Room Experience » Chapitre 1 : Importer un modèle 3D et faire l’étude de video projection » Exporter les informations des VP
Pour connaitre la distance entre la projecteur et sa surface de projection nous allons ajuster la paramètre FAR. Mais afin d’exporter une information visible nous allons utiliser l’outil Dimension. Use the Annotation and Dimension tools En…
Projection Design
Kinetic Designer: User Interface » Devices » Projectors » Projection Design
Select this device to control your Projection Design video projectors. Settings Property Default Description Name Projection Design VP User-friendly name. Enable ON Toggle to enable/disable the device.…
Grand Master
Kinetic Designer: User Interface » Grand Master
ON AIR button Toggle the ON AIR button to deactivate all rendering (2D preview, 3D scenes) in the Modulo Kinetic Designer to dedicate all ressources to show control for a more smooth operating experience. Grand master fader The slider controls the global…
Remap
Kinetic Designer: User Interface » Graph Editor » Common Graph Nodes » Array » Remap
Description This node enables you to rename or remove properties in an array and add an offset and/or a multiplier coefficient to all its values. Properties Click the button in the bottom left of the Editor panel to add a line of remap. Each line of remap…
Ajout de sources Live
Tutoriels – Français » Tutoriels de formation » Live Event » Live event Part 3-Mixer » Ajout de sources Live
Nous allons préparer des sources : Ajouter 4 sources live dans le mixer. Créer une source et lui affecter un media LIVE *Il est possible d’ajouter deux type de sources. Les sources Live sont des signaux live tels que un flux NDI, ou HDMI, SDI…
Color Blend
Kinetic Designer: User Interface » Graph Editor » Render Graph Nodes » GPU Blend » Color Blend
Description This effect accepts two images as inputs and creates a third one by applying a color blend technique chosen among a list of presets. Properties Blending Mode : Choose the compositing effect to apply Default : Normal Opacity Src : Sets the…
MIDI
Kinetic Designer: User Interface » Devices » Control » MIDI
This device allows you to receive or send MIDI event and receive MTC MIDI Timecode. You need to add a USB external MIDI interface to use this device. Settings: Name User-friendly name Enable Activate to enable the device Run at…
Niryo ArmRobot
Kinetic Designer: User Interface » Devices » Motors » Niryo ArmRobot
Choose this device to control a Niryo Robot Arm. Settings: Name User-friendly name Enable Activate to enable the device IP set your device ip address . Your device and Kinetic Designer need to be in the same subnet…
Barco RLM
Kinetic Designer: User Interface » Devices » Projectors » Barco RLM
Select this device to control Barco RLM-series video projectors. Settings Property Default Description Name Barco RLM User-friendly name. Enable ON Toggle to enable/disable the device. Run at…
NDI
Kinetic Designer: User Interface » Media list » NDI
You can add a NDI source. This allows you to stream sources using the NewTek protocol over IP. Name Assign a name in order to find it easily on the media list Source select a NDI source from the list Width Stream width…
Calibrer la position des caméras dans la 3D
Tutoriels – Français » Tutoriels de formation » Projection de contenu en utilisant le tracking » Calibrer la position des caméras dans la 3D
Les caméras sont maintenant configurées et ajoutées au projet Modulo Kinetic Designer. Nous allons maintenant calibrer leur position dans l’environnement 3D. Utiliser le Wand (baguette) pour obtenir des points dans l’espace pour la calibration Fixer…
HTTP REST
Kinetic Designer: User Interface » Devices » Low level protocol » HTTP REST
Choose this device to control a device using a Low Level Http Rest. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup IP Enter…
Deltacast
Kinetic Designer: User Interface » Media list » Deltacast
You can use a Deltacast capture card in order to capture a HDMI or HD-SDI, on SDI, DVI video stream. You can handle it as a media. General: For HD-SDI input board type: Configure settings in order to display media from the acquisition cards. Name …
Barco Encore
Kinetic Designer: User Interface » Devices » Switchers » Barco Encore
Choose this device to control Barco Encore series. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup IP Enter the ip address of…
Barco E2
Kinetic Designer: User Interface » Devices » Switchers » Barco E2
Choose this device to control Barco E2 series. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup IP Enter the ip address of…
Digital Projection
Kinetic Designer: User Interface » Devices » Projectors » Digital Projection
Select this device to control Titan Digital Projection video projectors. Settings Property Default Description Name Digital Projection User-friendly name. Enable ON Toggle to enable/disable the device.…
Epson
Kinetic Designer: User Interface » Devices » Projectors » Epson
Select this device to control Epson video projectors. *Note: Recent Epson projectors have received a firmware update that forces encrypted IP communication with the projector. To maintain control of the projector via the media server, the Command Communication…
Implement the video projectors
Tutoriels – Français » Tutoriels de formation » Projet entier : Immersive Room Experience » Chapitre 1 : Importer un modèle 3D et faire l’étude de video projection » Implement the video projectors
La pré étude qui nous a été fourni nous recommande ce nombre de video projecteurs : Surface Quantité Lumens Resolution Throw ratio Lux Distance de la surface Hauteur au sol North Wall 1 C2 1280×800…
Implement the video projectors
Tutorials – English » Training tutorials » Entire project : Immersive Room Experience » Chapter 1 : Import a 3D model and make the video projection study » Implement the video projectors
The pre study tells us a number of projectors that we need to implement in the 3D: Surface Quantity Lumens Resolution Throw ratio Lux Distance from surface Height from ground North Wall 1 C2 1280×800…
Contact our Tech Support team
How-To » Contact our Tech Support team
For technical inquiries, please click on this link to access our Ticket system, or send an email to: ticket@modulo-pi.com. To speed up the response time, please submit 1 ticket / topic.
Rotary IP
Kinetic Designer: User Interface » Devices » Tracking » Rotary IP
Choose this device to mesure an angular rotation or a distance if this device is associated with Draw Wire. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at…
Notifications
Kinetic Designer: User Interface » Top Menu » V-Nodes » Remote Settings » Notifications
You can setup the email notifications in this panel. You need to create an email account that you will use to send emails to. SMTP server: Enter the SMTP server address provided by your email provider. Choose the correct port and the encryption method following…
Calibration 2D
Kinetic Designer: User Interface » Graph Editor » Common Graph Nodes » Array » Calibration 2D
Description This node enables you to map 2D sensor data (generally x, y coordinates) into 2D coordinates relevant to your installation (a screen, a region on a wall, on the floor, etc.). Properties The Editor panel for this node is composed of four lines,…
Friction
Kinetic Designer: User Interface » Graph Editor » Common Graph Nodes » Array » Friction
Description This node is designed to compute acceleration and deceleration factors to a speed property in an array created by a sensor tracking a moving object. This is useful to add an accumulation and a release of inertia to a moving object relative to tracked data…
Live Mixer overview
Live Mixer » Live Mixer overview
This application works on MAC and PC. It is a free remote application. When you launch the application, you need to enter the IP address of the Modulo Kinetic. You can open any number of Live Mixer simultaneously: It is fully Multi-User. You can open the Modulo…
Environnement 3D
Tutoriels – Français » Tutoriels de formation » Architectural video mapping » Architectural 1 – Etude de video projection et simulation » Environnement 3D
Monument de 28m x 18m à son point le plus haut. Informations des projecteurs : Définition : 1920×1080 Lumens : 20.000 Nombre de projecteurs en ROTATION à 90 deg : 2 Distance : 30 mètres Hauteur : 9 mètres Taille de la tour de projection : 3m x…
Slamtec RPlidar S3 / A3
Kinetic Designer: User Interface » Devices » LiDAR 2D » Slamtec RPlidar S3 / A3
Description The Slamtec RPlidar S3 is a 360° laser range scanner for indoor and outdoor application. It has a working range of up to 40m with low reflectivity at up to 15m and captures up to 32 000 samples per seconds. Modulo Kinetic also supports the Slamtec…
RFID
Kinetic Designer: User Interface » Devices » Phidgets » RFID
Choose this device to connect to a Phidgets RFID Read-Write 1024_0B You can trigger a task with a RFID badge or sticker. The Phidget RFID Read-Write is compatible with tags that use either the EM4100 series, T5577, or FDX-B protocols. Settings: Name |…
Playback Pro
Kinetic Designer: User Interface » Devices » Other » Playback Pro
This device allows you to control the Playback Pro Plus software. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup IP Enter…
Add another camera to the XR scene
Tutorials – English » Training tutorials » Setup a XR studio with a green screen » Add another camera to the XR scene
In this second part of the exercice we will add a new camera to the XR scene, the same camera we used until now the Panasonic AW-UE150 camera. To do so we will repeat the steps we did before for the first camera, and add a new Render Surface for this…
Autodiscover Deltacast
Kinetic Designer: User Interface » Media list » Autodiscover Deltacast
You need first to choose the reference VNode in the menu Project/Project settings/General Tab/ Reference VNode field: The available source will be searched on this VNode. This new feature helps you detect and automatically add all input cards detected in Modulo…
Repatching of sources in the Live Mixer
Tutorials – English » Training tutorials » Live Event » Live event Part 4 : Migrating to the media server » Repatching of sources in the Live Mixer
Repatch of live source in the mixer to point to Deltacast live sources instead of NDI This ends this series of tutorials where we have seen all the necessary components of Modulo Kinetic Designer to run a multiscreen show using live feeds, effects, and the…
Use media Filters
Tutorials – English » Training tutorials » Entire project : Immersive Room Experience » Chapter 2 : Prepare V-Nodes and Render Surfaces for Media » Use media Filters
For the moment we added patterns to timeline without wondering about media Filters. Without media Filters, media are all displayed at the same 0;0 coordinates in the Preview window. We will see how media Filters can help us to place the content at the right…
Add timelines and content for private events
Tutorials – English » Training tutorials » Entire project : Immersive Room Experience » Chapter 5 : Prepare content for private events » Add timelines and content for private events
In order to have a proper project and maybe being able to crossfade content between exhbition content and private content for special private events, let’s create different timelines. Add timelines for private events Create a timeline “MUSIC” that…
Preferences
Kinetic Designer: User Interface » Top Menu » Edit » Preferences
From this pop-up window you can configure: General: Autosave: You can activate the autosave feature. Disable this option when the show is playing. Auto backup: Allow to trigger an automatic backup. Define the recurrence of the auto backup. Interfaces: Theme:…
Companion Apps
Companion Apps
Companion Apps Modulo Kinetic comes with different companion apps designed to further enhance your experience working with the media server: Kinetic Panel: Access your custom user panels on Android or iOS devices, Mac or PC ModuloDMXTool: Send and receive Art-Net…
Projection de contenu en utilisant le tracking
Tutoriels – Français » Tutoriels de formation » Projection de contenu en utilisant le tracking
KineMotion est une solution de tracking en temps réel développée par Modulo Pi. Il peut être utilisé pour faire une projection dynamique, FX interractifs, follow-spot automatique, spatialisation audio, et plus. Pour plus d’information veuillez-vous référer…
Live event Part 2-Multi timelines / User interface
Tutoriels – Français » Tutoriels de formation » Live Event » Live event Part 2-Multi timelines / User interface
La seconde partie est dans la continuité de la première et abordera les points suivants : Création et utilisation de source live NDI, d’un compte à rebours et d’un media text. La création et l’utilisation de plusieurs…
Presets
Live Mixer » Presets
You can create any number of Presets. The Preset allows you to store layers settings to recall to Program or Preview. You can additionnaly store a recall of a task. Click on the + button to add new Preset in your project: It will create a Preset with the content…
Web
Kinetic Designer: User Interface » Media list » Web
You can integrate a web page as a media. It enables you to integrate updated media dynamically from an external source (for instance you can use it for digital signage/dynamic display). It may have a negative impact on the other media playback displaying at the same…
File
Kinetic Designer: User Interface » Graph Editor » Common Graph Nodes » File
This section contains a set of nodes to read, write or otherwise manipulate external files. File nodes : Play Sound : Read a sound file and send it to the audio output Read File : Open a file and continuously monitor its content Write File : Open a file and…
Art-Net timecode
Kinetic Designer: User Interface » Devices » Timecode » Art-Net timecode
This device allows you to receive or send Art-Net Timecode. Settings Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup Mode select Slave…
Calibrate the cameras in the 3D space
Tutorials – English » Training tutorials » Tracking to project interactive content with one video projector » Calibrate the cameras in the 3D space
Our cameras are ready and added to our project in Modulo Kinetic Designer. Now, we will add and calibrate them in order to place them in the 3D environment. Use the Wand to get points for the calibration Put the Wand onto its stick to make higher movements In…
Add the second camera and configure it
Tutoriels – Français » Tutoriels de formation » Setup a XR studio with a green screen » Add another camera to the XR scene » Add the second camera and configure it
Ajouter les decices pour la seconde camera Ajouter un nouveau device Camera AR FreeD Kinetic Device, définir son Camera type en Panasonic AW-UE-150 et indiquer son communication port Ajotuer un device PTZ camera , sélectionner Panasonic AW-HExx et entrer son…
Preview/Program
Tutoriels – Français » Tutoriels de formation » Live Event » Live event Part 3-Mixer » Preview/Program
Le Mixer a un mode de fonctionnement avec un Preview et un Program. *Le Preview contient le contenu qui sera envoyé au Program après une action en CUT ou TAKE (fade). Une transition Preview/Program CUT enverra le Preview au Program sans fondu, tandis qu’un…
Live event Part 3 : Mixer
Tutorials – English » Training tutorials » Live Event » Live event Part 3 : Mixer
In the third part of this exercise we will learn how to use the Live Mixer integrated in Modulo Kinetic Designer. In the previous parts we have seen how to organise some media by integrating them into Timelines and creating interfaces to control them, now let’s…
Label
Kinetic Designer: User Interface » Devices » Internal » Label
This device is an internal device: Choose this device to send text info to the User Interface. When the text is modifed, it will be updated automatically to all Modulo Player panels connected to the server. Settings: Name User-friendly name…
License
Kinetic Designer: User Interface » Top Menu » V-Nodes » Remote Settings » License
You can check the software’s license version and as well as the license’s expiry date. In this tab, you also have three buttons: Create a Demo (temporary) license Create a lifetime (permanent) license Update the already existing license These…
Monitoring
Kinetic Designer: User Interface » V-Nodes » Monitoring
You can add monitoring displays to V-Node servers and visualize in a Mosaic input and output sources of your Show. • Click on Monitoring: From the Editor Indicate where your Monitoring will be displayed. You can activate NDI enable, to send Monitoring to another…
Ouster
Kinetic Designer: User Interface » Devices » LiDAR 3D » Ouster
Description The Ouster OS0 has an ultra-wide field of view of 90° and a maximum range of up to 35m. The OS Dome has a 180° field of view and a maximum range of up to 20m. These are currently the only models of 3D LIDARS officially supported by Modulo…
Toggle your V-Node(s) ‘Online’
Tutorials – English » Training tutorials » Live Event » Live event Part 1 : Starting the Project » Toggle your V-Node(s) ‘Online’
For the moment your V-Node is offline and will not display any content. Toggle the V-Node to ‘Online’ In the V-Nodes tab, right-click on your V-Node and select Start. The indicator should turn from red to orange. Right-click on the V-Node again and…
setLocateTimeline()
Kinetic Designer: User Interface » Graph Editor » Common Graph Nodes » Script » Javascript » Designer Functions » setLocateTimeline()
!Warning: This page is currently under construction and the information it contains may be uncomplete and/or inaccurate. Description Send a Pause ( ) command to a timeline and/or locate the timeline at a specified…