Search
Related topics are listed below.
RenderSurface source creation
Tutorials – English » Training tutorials » Live Event » Live event Part 3 : Mixer » RenderSurface source creation
Now let’s create a source and extract a portion of our RenderSurface. In the Edit tab, click on + to create a new source. Name it BACKGROUND. In the Editor panel set the Input type to Render Surface and in the second drop-down menu select your render…
Ajout de source render surface
Tutoriels – Français » Tutoriels de formation » Live Event » Live event Part 3-Mixer » Ajout de source render surface
Nous allons maintenant ajouter une source de type RenderSurface.
Appliquer un effet chromakey sur la source Deltacast
Tutoriels – Français » Tutoriels de formation » Setup a XR studio with a green screen » Mix the 3D camera POV and the real camera feed » Appliquer un effet chromakey sur la source Deltacast
Selectionner le layer Deltacast dans la timeline et dans la fenêtre Editor ajouter un Fx > Chromakey Ajuster le réglage green color Pour le Primary color, c’est mieux de choisir la couleur la plus courante au lieu d’une zone brillante ou…
Apply a chromakey FX on the Deltacast source
Tutorials – English » Training tutorials » Setup a XR studio with a green screen » Mix the 3D camera POV and the real camera feed » Apply a chromakey FX on the Deltacast source
Select the layer Deltacast in the timeline and in the Editor tab add an Fx > Chromakey Adjust the green color setting As a Primary color, it is better to choose a mean background color instead of a very light or dark one *If you really have differente green…
Live mixer – add source to the Preview and TAKE action
Tutorials – English » Training tutorials » X-Map-Letter » Live mixer – add source to the Preview and TAKE action
We will now add two sources in the SCREEN destination Then a source in the Logo destination and in the Round destination You can now press TAKE. To action the TAKE will send the Preview to the Program.
Live mixer – mettre une source au Preview et TAKE au PGM
Tutoriels – Français » Tutoriels de formation » X-Map-Letter » Live mixer – mettre une source au Preview et TAKE au PGM
Nous allons maintenant ajouter deux sources dans la destination SCREEN : Puis une source dans la destination Logo et dans la destination Round : Faire maintenant un TAKE. Actionner le TAKE enverra le contenu du Preview au Program.
L-Acoustics L-ISA Controller
Kinetic Designer: User Interface » Devices » Audio » L-Acoustics L-ISA Controller
Choose this device to connect to a L_Acoustics L-ISA controller Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup Input Enable…
Adm OSC
Kinetic Designer: User Interface » Devices » Audio » Adm OSC
Description This device connects to other devices on the network running Object Based Audio (OBA) by using the Audio Definition Model (ADM) implemented over the Open Sound Control (OSC) protocol. It can send and/or receive position data for sources. *Note : Position…
L-ISA Spatial Audio
Tutorials – English » Video tutorials » L-ISA Spatial Audio
Overview In this video tutorial, we will see how to interface Kinetic Designer with an L-ISA Controller by L Acoustic. We’ll first see how to create an L-ISA device and configure it. Then we will see how to send pan, width, distance and tracking…
PJLink
Kinetic Designer: User Interface » Devices » Projectors » PJLink
Select this device to control Panasonic video projectors and many other projector brands that support the PJLink protocol. Settings Property Default Description Name PJLink User-friendly name. Enable ON …
Preview/Program
Tutorials – English » Training tutorials » Live Event » Live event Part 3 : Mixer » Preview/Program
The Mixer works with a Preview (PVW) and a Program (PGM). *Info : Program contains the feed currently live and Preview contains the content standing-by to be sent to the Program with the CUT or TAKE actions. CUT will send the content from Preview to Program instantly,…
Use the Mixer software to switch between Camera1 and Camera2
Tutorials – English » Training tutorials » Setup a XR studio with a green screen » Add another camera to the XR scene » Use the Mixer software to switch between Camera1 and Camera2
Use the Mixer to switch between the two cameras Open the Modulo Mixer software Enter the Designer IP Address Add 1 Destination of 1920×1080 Add 2 Sources, one for the Render Surface Camera1 and one for the Render Surface Camera2 Drag & drop the Destination…
Barco
Kinetic Designer: User Interface » Devices » Projectors » Barco
Select this device to control Barco UDX or F-series video projectors. Settings Property Default Description Name Barco VP User-friendly name. Enable ON Toggle to enable/disable the device. Run at…
Destinations
Live Mixer » Destinations
Destinations You can create any number of Destinations. Each Destination can have any number of Mix/Engine (ME). Each Mix/Engine is composed of two layers than can crossdfade from Preview to Program. Click on the +Dest button to add new Destination in your…
Mix the 3D camera POV and the real camera feed
Tutorials – English » Training tutorials » Setup a XR studio with a green screen » Mix the 3D camera POV and the real camera feed
Get the 3D camera POV Drag and drop the 3D camera named Camera_AR into the Timeline “CAMERAS” *This Camera_AR content needs to be sent to the V-Node, meaning this Camera layer needs to be placed on the Render Surface assigned to the V-Node. The…
Alpha Compositing
Kinetic Designer: User Interface » Graph Editor » Render Graph Nodes » GPU Blend » Alpha Compositing
Description This effect accepts two images as inputs and allows for a number of compositing effects to be applied on these two images. *This is one of the most fundamental nodes in the render graph and will be widely used to combine two images into a single…
Color Blend
Kinetic Designer: User Interface » Graph Editor » Render Graph Nodes » GPU Blend » Color Blend
Description This effect accepts two images as inputs and creates a third one by applying a color blend technique chosen among a list of presets. Properties Blending Mode : Choose the compositing effect to apply Default : Normal Opacity Src : Sets the…
Add the second camera and configure it
Tutorials – English » Training tutorials » Setup a XR studio with a green screen » Add another camera to the XR scene » Add the second camera and configure it
Add devices for the new camera Add a new Camera AR FreeD Kinetic Device, define the Camera type to Panasonic AW-UE-150 and indicate its communication port Add a new Device PTZ camera , select Panasonic AW-HExx and enter its IP address *Because the first Camera is…
Analog Way VIO
Kinetic Designer: User Interface » Devices » Switchers » Analog Way VIO
Choose this device to control Analog Way VIO series. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup IP Enter the ip address…
Sources
Live Mixer » Sources
You can create any number of sources. Click on the + button to add new source in your project. Click on the button to delete a source. Click on this button to visualize live thumbnail stream. You can directly freeze/unfreeze a source in the list. You can…
Vector Target
Kinetic Designer: User Interface » Graph Editor » Common Graph Nodes » Math » Vector Target
Description This node performs a vector subtraction between two vectors Source and Target. The subtraction is Target – Source and the resulting vector describes the parameters (angle and length) to go from Source to Target. Properties This node has…
Sources creation
Tutorials – English » Training tutorials » Live Event » Live event Part 3 : Mixer » Sources creation
Now let’s create our sources. *Info : There are only two kinds of source you can add : Live sources and RenderSurface sources. Live sources are live signals from a NDI feed, HDMI, SDI, etc. RenderSurface sources are content displayed on a Render Surface, which…
Christie Digital
Kinetic Designer: User Interface » Devices » Projectors » Christie Digital
Select this device to control Christie Digital video projectors. Settings Property Default Description Name Christie Digital User-friendly name. Enable ON Toggle to enable/disable the device. Run…
Optoma
Kinetic Designer: User Interface » Devices » Projectors » Optoma
Select this device to control Optoma video projectors. Settings Property Default Description Name Optoma User-friendly name. Enable ON Toggle to enable/disable the device. Run at startup ON …
MIDI
Kinetic Designer: User Interface » Devices » Control » MIDI
This device allows you to receive or send MIDI event and receive MTC MIDI Timecode. You need to add a USB external MIDI interface to use this device. Settings: Name User-friendly name Enable Activate to enable the device Run at…
NDI
Kinetic Designer: User Interface » Media list » NDI
You can add a NDI source. This allows you to stream sources using the NewTek protocol over IP. Name Assign a name in order to find it easily on the media list Source select a NDI source from the list Width Stream width…
Deltacast
Kinetic Designer: User Interface » Media list » Deltacast
You can use a Deltacast capture card in order to capture a HDMI or HD-SDI, on SDI, DVI video stream. You can handle it as a media. General: For HD-SDI input board type: Configure settings in order to display media from the acquisition cards. Name …
OSC
Kinetic Designer: User Interface » Devices » Control » OSC
This device allows you to receive or send OSC message. !OSC message is an alphanumerical field starting with “/” caracter Settings: Name User-friendly name Enable Activate to enable the device Run at startup …
Generate a dongle context file
How-To » Generate a dongle context file
You have several options to generate a dongle context file: For a VNode directly from the Modulo Kinetic Designer with the remote control panel From the Modulo Kinetic Designer or VNode (or notebook with Lite edition) !If you need to update several applications at…
Ajout de sources Live
Tutoriels – Français » Tutoriels de formation » Live Event » Live event Part 3-Mixer » Ajout de sources Live
Nous allons préparer des sources : Ajouter 4 sources live dans le mixer. Créer une source et lui affecter un media LIVE *Il est possible d’ajouter deux type de sources. Les sources Live sont des signaux live tels que un flux NDI, ou HDMI, SDI…
Remap
Kinetic Designer: User Interface » Graph Editor » Common Graph Nodes » Array » Remap
Description This node enables you to rename or remove properties in an array and add an offset and/or a multiplier coefficient to all its values. Properties Click the button in the bottom left of the Editor panel to add a line of remap. Each line of remap…
Niryo ArmRobot
Kinetic Designer: User Interface » Devices » Motors » Niryo ArmRobot
Choose this device to control a Niryo Robot Arm. Settings: Name User-friendly name Enable Activate to enable the device IP set your device ip address . Your device and Kinetic Designer need to be in the same subnet…
Barco RLM
Kinetic Designer: User Interface » Devices » Projectors » Barco RLM
Select this device to control Barco RLM-series video projectors. Settings Property Default Description Name Barco RLM User-friendly name. Enable ON Toggle to enable/disable the device. Run at…
Calibration 2D
Kinetic Designer: User Interface » Graph Editor » Common Graph Nodes » Array » Calibration 2D
Description This node enables you to map 2D sensor data (generally x, y coordinates) into 2D coordinates relevant to your installation (a screen, a region on a wall, on the floor, etc.). Properties The Editor panel for this node is composed of four lines,…
Digital Projection
Kinetic Designer: User Interface » Devices » Projectors » Digital Projection
Select this device to control Titan Digital Projection video projectors. Settings Property Default Description Name Digital Projection User-friendly name. Enable ON Toggle to enable/disable the device.…
Web
Kinetic Designer: User Interface » Media list » Web
You can integrate a web page as a media. It enables you to integrate updated media dynamically from an external source (for instance you can use it for digital signage/dynamic display). It may have a negative impact on the other media playback displaying at the same…
Repatching of sources in the Live Mixer
Tutorials – English » Training tutorials » Live Event » Live event Part 4 : Migrating to the media server » Repatching of sources in the Live Mixer
Repatch of live source in the mixer to point to Deltacast live sources instead of NDI This ends this series of tutorials where we have seen all the necessary components of Modulo Kinetic Designer to run a multiscreen show using live feeds, effects, and the…
Live mixer – first start and add sources
Tutorials – English » Training tutorials » X-Map-Letter » Live mixer – first start and add sources
We first need to add live sources in the Kinetic Designer. Depending on the sources and frame grabber available, they may be SDI or HDMI sources or more simply Streamlined sources in NDI. Then, we open the Mixer application, we connect to the Designer by entering its…
Monitoring
Kinetic Designer: User Interface » V-Nodes » Monitoring
You can add monitoring displays to V-Node servers and visualize in a Mosaic input and output sources of your Show. • Click on Monitoring: From the Editor Indicate where your Monitoring will be displayed. You can activate NDI enable, to send Monitoring to another…
Add timelines and content for private events
Tutorials – English » Training tutorials » Entire project : Immersive Room Experience » Chapter 5 : Prepare content for private events » Add timelines and content for private events
In order to have a proper project and maybe being able to crossfade content between exhbition content and private content for special private events, let’s create different timelines. Add timelines for private events Create a timeline “MUSIC” that…
Kinetic Designer
Kinetic Designer: User Interface » Devices » Modulo Pi Devices » Kinetic Designer
Choose this device to control a Kinetic Designer. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup IP Enter the ip address of…
Epson
Kinetic Designer: User Interface » Devices » Projectors » Epson
Select this device to control Epson video projectors. *Note: Recent Epson projectors have received a firmware update that forces encrypted IP communication with the projector. To maintain control of the projector via the media server, the Command Communication…
Toggle your V-Node(s) ‘Online’
Tutorials – English » Training tutorials » Live Event » Live event Part 1 : Starting the Project » Toggle your V-Node(s) ‘Online’
For the moment your V-Node is offline and will not display any content. Toggle the V-Node to ‘Online’ In the V-Nodes tab, right-click on your V-Node and select Start. The indicator should turn from red to orange. Right-click on the V-Node again and…
Add the second camera and configure it
Tutoriels – Français » Tutoriels de formation » Setup a XR studio with a green screen » Add another camera to the XR scene » Add the second camera and configure it
Ajouter les decices pour la seconde camera Ajouter un nouveau device Camera AR FreeD Kinetic Device, définir son Camera type en Panasonic AW-UE-150 et indiquer son communication port Ajotuer un device PTZ camera , sélectionner Panasonic AW-HExx et entrer son…
Live event Part 2-Multi timelines / User interface
Tutoriels – Français » Tutoriels de formation » Live Event » Live event Part 2-Multi timelines / User interface
La seconde partie est dans la continuité de la première et abordera les points suivants : Création et utilisation de source live NDI, d’un compte à rebours et d’un media text. La création et l’utilisation de plusieurs…
Modulo Shortcut
Kinetic Designer: User Interface » Devices » Modulo Pi Devices » Modulo Shortcut
Choose this device to control a Modulo Shortcut and take control to your Power Point presentations. You can download Modulo Shortcut for Windows here You can download Modulo Shortcut for Mac here Settings: Name User-friendly name Enable …
Calibration of the projector
Tutorials – English » Training tutorials » Architectural video mapping » Architectural 3 – Calibrate a projector in 3D » Calibration of the projector
In this second part of this tutorial we will : Enable the second output of your laptop to send content to the Pico projector Move the points to the real corners of the Castle Calibrate the projector Step 1 : Display the points Right click on the output and…
Use the Mixer software to switch between Camera1 and Camera2
Tutoriels – Français » Tutoriels de formation » Setup a XR studio with a green screen » Add another camera to the XR scene » Use the Mixer software to switch between Camera1 and Camera2
Utilisation du Mixer pour faire une réalisation à deux caméras Ouvrir l’application Modulo Mixer Entrer l’adresse IP du Designer Designer Ajouter 1 Destination de 1920×1080 Ajouter 2 Sources, une pour la Render Surface de la Camera1 et une…
RFID
Kinetic Designer: User Interface » Devices » Phidgets » RFID
Choose this device to connect to a Phidgets RFID Read-Write 1024_0B You can trigger a task with a RFID badge or sticker. The Phidget RFID Read-Write is compatible with tags that use either the EM4100 series, T5577, or FDX-B protocols. Settings: Name |…
Playback Pro
Kinetic Designer: User Interface » Devices » Other » Playback Pro
This device allows you to control the Playback Pro Plus software. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup IP Enter…
PosiStage Net Server
Kinetic Designer: User Interface » Devices » Tracking » PosiStage Net Server
Select this device to send PosiStageNet information to the tracking server. PosiStageNet is an open protocol enabling the broadcast of 3 dimensional position coordinates, velocity, orientation and acceleration data of objects tracked on…
Preview/Program
Tutoriels – Français » Tutoriels de formation » Live Event » Live event Part 3-Mixer » Preview/Program
Le Mixer a un mode de fonctionnement avec un Preview et un Program. *Le Preview contient le contenu qui sera envoyé au Program après une action en CUT ou TAKE (fade). Une transition Preview/Program CUT enverra le Preview au Program sans fondu, tandis qu’un…
Use media Filters
Tutorials – English » Training tutorials » Entire project : Immersive Room Experience » Chapter 2 : Prepare V-Nodes and Render Surfaces for Media » Use media Filters
For the moment we added patterns to timeline without wondering about media Filters. Without media Filters, media are all displayed at the same 0;0 coordinates in the Preview window. We will see how media Filters can help us to place the content at the right…
UDP
Kinetic Designer: User Interface » Devices » Low level protocol » UDP
Choose this device to send and receive UDP packet to/from other devices. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup IP …
WebSocket client
Kinetic Designer: User Interface » Devices » Low level protocol » WebSocket client
Choose this device to connect to a WebSocket server. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup Url Url of your server.…
ModuloDMXTool
Companion Apps » ModuloDMXTool
ModuloDMXTool: ModuloDMXTool is free application to send and receive Art-Net DMX from/to any device. You can use this application to simulate a light desk or a light when you use the DMX device in Modulo Player or Modulo Kinetic. Download: For PC: Connect to the…
WebSocket server
Kinetic Designer: User Interface » Devices » Low level protocol » WebSocket server
Choose this device to create a WebSocket server. other device can connect to this server. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup…
3D Lights
Kinetic Designer: User Interface » 3D scenes » 3D Lights
In this panel you have access to the complete list of lights of the scene. Thanks to the toolbar you can add a light, search by name and delete the selected lights. Settings General Visible draws the light source, this does NOT affect the use of the…
Mix the 3D camera POV and the real camera feed
Tutoriels – Français » Tutoriels de formation » Setup a XR studio with a green screen » Mix the 3D camera POV and the real camera feed
Utiliser le point de vue de la caméra 3D Glisser et déposer la camera 3D appelée Camera_AR dans la Timeline “CAMERAS” *Le point de vue de cette Camera_AR doit être envoyée au V-Node, pour cela la layer de cette caméra 3D doit être placée sur la…
Version 4.0
Release Notes » Version 4.0
Version 4.0 – May 18, 2021: Release Note In May 2021 and after months of development, Modulo Kinetic makes a major step forward with the release of the version 4. As the biggest release ever, Modulo Kinetic V4 comes with a revamped user interface, a variety of…
Serial
Kinetic Designer: User Interface » Devices » Low level protocol » Serial
Choose this device to control a device on a serial port. Optionally, you will need a USB to RS232 converter to connect. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run…
Metaball
Kinetic Designer: User Interface » Graph Editor » Render Graph Nodes » GPU Multi » Metaball
Description This effect displays a simple ball at the coordinates contained in the input array. The ball can simulate 3D lighting using its Global properties or can be rendered as flat colors and just display as circles. Properties Array properties Any…
Création de Destinations
Tutoriels – Français » Tutoriels de formation » Live Event » Live event Part 3-Mixer » Création de Destinations
Créer des destinations est nécessaire au fonctionnement du Mixer. *Une destination est une zone pixellaire dans laquelle nous pouvons afficher et mélanger des sources en utilisant des ME (Mixer Engines). Un ME peut contenir une source Nous allons créer 3…
TCP Client
Kinetic Designer: User Interface » Devices » Low level protocol » TCP Client
Choose this device to control a device sending TCP/IP command. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup IP Enter your…
TCP Server
Kinetic Designer: User Interface » Devices » Low level protocol » TCP Server
Choose this device to create a TCP/IP server. other device can connect to this server. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup…
Invert
Kinetic Designer: User Interface » Graph Editor » Render Graph Nodes » GPU FX » Invert
Description This node inverts the colors in the source image. Each color channel (R, G, B and A) has an 8-bit value, ranging from 0 to 255. For each channel this node does the following operation : ValueMax – ValueCurrent. ValueMax is a property that can be…
Write File
Kinetic Designer: User Interface » Graph Editor » Common Graph Nodes » File » Write File
Description This node writes plain text content to a file. Properties File : Click to open the windows explorer window to select your file. Default : Empty Write mode : Choose between Overwrite and Append. Default : Overwrite Use timestamp : Choose…
Projection Design
Kinetic Designer: User Interface » Devices » Projectors » Projection Design
Select this device to control your Projection Design video projectors. Settings Property Default Description Name Projection Design VP User-friendly name. Enable ON Toggle to enable/disable the device.…
Grand Master
Kinetic Designer: User Interface » Grand Master
ON AIR button Toggle the ON AIR button to deactivate all rendering (2D preview, 3D scenes) in the Modulo Kinetic Designer to dedicate all ressources to show control for a more smooth operating experience. Grand master fader The slider controls the global…
Modulo Shortcut
Companion Apps » Modulo Shortcut
Modulo Shortcut: Use this free application to easily take control of your Keynote or PowerPoint presentations using common shortcuts. Download: For Windows PowerPoint: Connect to the Customer Area > Modulo Kinetic > Companion Apps section Then install Modulo…
Javascript
Kinetic Designer: User Interface » Graph Editor » Common Graph Nodes » Script » Javascript
Description This node enables you to run javascript in the graph editor. This can be very useful when doing complex conditional operations, complex maths or to interact with an HTTP object that can be created in the Devices tab. You can add as many inputs and…
Import PSD to create outputs
Tutorials – English » Training tutorials » Entire project : Immersive Room Experience » Chapter 2 : Prepare V-Nodes and Render Surfaces for Media » Import PSD to create outputs
Open the Media window Open the XMAP folder then click on + then Media… and select all the XMAP****.PSD You can add outputs manually or you can import PSD files we prepared to create the Outputs. Select the V-Node and in the Output area click on then PSD…
Ouster
Kinetic Designer: User Interface » Devices » LiDAR 3D » Ouster
Description The Ouster OS0 has an ultra-wide field of view of 90° and a maximum range of up to 35m. The OS Dome has a 180° field of view and a maximum range of up to 20m. These are currently the only models of 3D LIDARS officially supported by Modulo…
Destinations creation
Tutorials – English » Training tutorials » Live Event » Live event Part 3 : Mixer » Destinations creation
For the Mixer to function, it is mandatory to create a destination. *Info : A destination is a pixel area in which we will be able to display and mix sources using the Mixer Engines (ME). One ME can contain only one source. We will create 3 destinations : Main…
Image
Kinetic Designer: User Interface » UI Designer » Components » Basic » Image
Choose this component to create a new image in your user interface. Drag & drop this component in the graphical user interface or in the hierarchy tree. General: Name Description Width width of the component Height height of…
Ajout de sources
Tutoriels – Français » Tutoriels de formation » Live Event » Live event Part 2-Multi timelines / User interface » Ajout de sources
Création de sources Live, d’un compte à rebours et d’un texte NDI peut être utilisé pour les inputs mais aussi les outputs dans le logiciel Modulo Kinetic. *Ce protocole NDI permet de transporter des flux vidéos en utilisant un réseau TCP/IP…
HTTP REST
Kinetic Designer: User Interface » Devices » Low level protocol » HTTP REST
Choose this device to control a device using a Low Level Http Rest. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup IP Enter…
CSV to Array
Kinetic Designer: User Interface » Graph Editor » Common Graph Nodes » Array » CSV to Array
Description This node will create an array from a CSV file. This can be useful if you want to test your graphs by using dummy tables that can be quickly created in a spreadsheet and saved to CSV file. *Info : CSV stands for Comma Separated Values and describes a…
3D Projectors
Kinetic Designer: User Interface » 3D scenes » 3D Projectors
In this panel you have access to the complete list of projectors of the scene. Thanks to the toolbar you can add a projector, search by name and delete the selected projectors. In addition, you can activate or deactivate a projector by clicking directly on the…
Barco Encore
Kinetic Designer: User Interface » Devices » Switchers » Barco Encore
Choose this device to control Barco Encore series. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup IP Enter the ip address of…
Barco E2
Kinetic Designer: User Interface » Devices » Switchers » Barco E2
Choose this device to control Barco E2 series. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup IP Enter the ip address of…
User Interface
Tutoriels – Français » Tutoriels de formation » Live Event » Live event Part 2-Multi timelines / User interface » User Interface
Utiliser le UIDesigner pour créer une Interface Utilisateur Nous allons maintenant voir comme utiliser UIDesigner pour créer une interface adaptée à nos besoins. View > UIDesigner Aller dans le UI Designer Cliquer sur bouton + pour ajouter un User…
Sources Creation
Tutorials – English » Training tutorials » Live Event » Live event Part 2 : Multi timelines / User interface » Sources Creation
Creation of NDI Live sources, counter and text NDI can be used as either inputs or ouputs in Kinetic Designer. *Info : NDI is a protocol that enables video streams to be transported using a traditional TCP/IP network. Many applications allow you to stream using NDI…
Contact our Tech Support team
How-To » Contact our Tech Support team
For technical inquiries, please click on this link to access our Ticket system, or send an email to: ticket@modulo-pi.com. To speed up the response time, please submit 1 ticket / topic.
Notifications
Kinetic Designer: User Interface » Top Menu » V-Nodes » Remote Settings » Notifications
You can setup the email notifications in this panel. You need to create an email account that you will use to send emails to. SMTP server: Enter the SMTP server address provided by your email provider. Choose the correct port and the encryption method following…
Live Mixer overview
Live Mixer » Live Mixer overview
This application works on MAC and PC. It is a free remote application. When you launch the application, you need to enter the IP address of the Modulo Kinetic. You can open any number of Live Mixer simultaneously: It is fully Multi-User. You can open the Modulo…
3D scenes
Kinetic Designer: User Interface » 3D scenes
On the top of this panel you will find all the elements concerning your 3D scenes Current scene select the 3D scene from the dropdown list edit the 3D scene parameters add a 3D scene delete a 3D scene…
Open the Designer project and prepare the calibration
Tutorials – English » Training tutorials » Setup a XR studio with a green screen » Open the Designer project and prepare the calibration
Open the prepared project If you don’t have it yet, download the media kit here Open Kinetic Designer Choose Open and browse into your computer Add the Deltacast HDMI or SDI source In the Media tab, click on and add a Deltacast media Set the…
Chapter 7 : declare a Spare V-Node
Tutorials – English » Training tutorials » Entire project : Immersive Room Experience » Chapter 7 : declare a Spare V-Node
As we saw in Chapter 2 talking about media Filtering, In order to replace any V-Node, this V-Node needs to have all the media. That’s why the we have to set ON for VN04 on all Media Filters : FILTER name Default X Default Y V-Nodes…
EDID and Eyefinity Setup
Tutorials – English » Training tutorials » Live Event » Live event Part 4 : Migrating to the media server » EDID and Eyefinity Setup
We will now force an EDID on the 4 outputs and setup Eyefinity to create an extended desktop over the 4 screens. *Info : EDID stands for Extended Display Identification Data. We use the term to refer to a standardized data exchange where a display communicates its…
Ouvrir le projet Designer et préparer la calibration
Tutoriels – Français » Tutoriels de formation » Setup a XR studio with a green screen » Ouvrir le projet Designer et préparer la calibration
Ouvrir le projet préparé Si vous ne l’avez pas encore, télécharger le media kit ici Ouvrir Kinetic Designer Choisir Open et parcourir le chemin jusqu’à ouvrir le projet MOP Ajout de source Deltacast HDMI ou SDI pour la caméra Dans la…
Add another camera to the XR scene
Tutorials – English » Training tutorials » Setup a XR studio with a green screen » Add another camera to the XR scene
In this second part of the exercice we will add a new camera to the XR scene, the same camera we used until now the Panasonic AW-UE150 camera. To do so we will repeat the steps we did before for the first camera, and add a new Render Surface for this…
Autodiscover Deltacast
Kinetic Designer: User Interface » Media list » Autodiscover Deltacast
You need first to choose the reference VNode in the menu Project/Project settings/General Tab/ Reference VNode field: The available source will be searched on this VNode. This new feature helps you detect and automatically add all input cards detected in Modulo…
Preferences
Kinetic Designer: User Interface » Top Menu » Edit » Preferences
From this pop-up window you can configure: General: Autosave: You can activate the autosave feature. Disable this option when the show is playing. Auto backup: Allow to trigger an automatic backup. Define the recurrence of the auto backup. Interfaces: Theme:…
Companion Apps
Companion Apps
Companion Apps Modulo Kinetic comes with different companion apps designed to further enhance your experience working with the media server: Kinetic Panel: Access your custom user panels on Android or iOS devices, Mac or PC ModuloDMXTool: Send and receive Art-Net…
User Interface Editor
Tutorials – English » Training tutorials » Live Event » Live event Part 2 : Multi timelines / User interface » User Interface Editor
Using the user interface editor Let’s see how to use the user interface editor to tailor the interface to our needs. Go to the UI Designer tab. Click on the + button to add a User interface. *Tip : You can now use the Wizard button to have a list of…
Presets
Live Mixer » Presets
You can create any number of Presets. The Preset allows you to store layers settings to recall to Program or Preview. You can additionnaly store a recall of a task. Click on the + button to add new Preset in your project: It will create a Preset with the content…
File
Kinetic Designer: User Interface » Graph Editor » Common Graph Nodes » File
This section contains a set of nodes to read, write or otherwise manipulate external files. File nodes : Play Sound : Read a sound file and send it to the audio output Read File : Open a file and continuously monitor its content Write File : Open a file and…
Art-Net timecode
Kinetic Designer: User Interface » Devices » Timecode » Art-Net timecode
This device allows you to receive or send Art-Net Timecode. Settings Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup Mode select Slave…
Live event Part 3 : Mixer
Tutorials – English » Training tutorials » Live Event » Live event Part 3 : Mixer
In the third part of this exercise we will learn how to use the Live Mixer integrated in Modulo Kinetic Designer. In the previous parts we have seen how to organise some media by integrating them into Timelines and creating interfaces to control them, now let’s…