Choose this device to control analog outputs and mesure analog values using Modbus with this device ADAM-6224
Settings:
Name: User-friendly name
IP: Enter the ip address of your device. Your device and Modulo Player need to be in the same subnet
Port: TCP/IP port. 502 is the default value (usually doesn’t have to be changed)
Type:* Choose the ADAM-6224 or the generic Modbus version
Precision: adjust the DAC precision (8/12/16 bits)
Visual Mode: Choose the visual mode (V or mA)
min: Enter the minimal value of the range
max: Enter the maximal value of the range
If you select Generic, you need to enter the following information:
Nb input: The number of digital inputs
Nb output: The number of digital outputs
Start input address: Modbus input register address
Start output address: Modbus output register address
Task action:
Select the outputs you want to change and the corresponding values you want.
Task trigger:
N/A
Digimap trigger:
N/A
User interface:
N/A
Device information:
You can use for example the ADAM-6224
Need more help with this?
Don’t hesitate to contact us here.