Search
Related topics are listed below.
Media
Modulo Player Remote » Playlist tab » Layer settings » Media
Fade in: This value is the opacity transition duration at the launch of the Cue. Fade out: This value is the fade to black duration when there is no media on the same layer in the next cue. If you click on the fade out icon (marker-orange) this will change the…
Media transfer
We will now transfer the media to the server (or to the laptop folder in demo mode but simulating a network transfer as with a real server). We go to the Transfer tab: The left part lists the folders available in the Modulo Player Remote computer (including external…
Media tab
Modulo Player Remote » Media tab
The Media tab lists all media available on the project folder and subfolders. NB: Refer to the Media Creation page for codec and format specifications. Media can be either in sub-folders or in the base folder of your project. The non-compressed server versions…
Media transfer
Tutorials – English » Training tutorials » Start project » Media transfer
The Transfer tab is used to copy files and media from the computer running Modulo Player Remote to the Modulo Player server. You can find more details on this tab in the Media tab manual page. In this tab: The left part browses folders and files on the Modulo…
Media Creation
Useful Guidelines » Media Creation
Here are the recommendations for media creation in Modulo Player V5.
Media server overview
Introduction » Media server overview
Several customizable hardware configurations Modulo Player is a hardware + software media server available in 4 different hardware configurations to fit your needs and budget: Nano, Standard, Pro, and Ultra. The different hardware configurations can all be…
Modulo Player media server
Starter guide » Modulo Player media server
You are starting to use our Modulo Player media server. On the next pages, you will be guided through some steps to set up your Modulo Player media server.
Project transfer on the Media Server
Tutorials – English » Training tutorials » Live Event » Project transfer on the Media Server
This final exercise will allow you to set the project up on the Media Server: Server configuration Transfer of the complete show Perform the calibration and blending of the two video projectors Setting up and using Live SDI and/or HDMI sources StreamDeck…
Modulo Sync
Companion Apps » Modulo Sync
Modulo Sync: Modulo Sync is a file synchronization tool for Modulo Player. Use this free application to transfer media in several servers at the same time, or to get a backup of your project (excluding media files). Download: For PC (Windows x32): Connect to the…
General tab
Modulo Player Remote » General tab
This tab is accessible only if the media server application is currently running (green icon). The General tab is divided in 3 parts: Top menu, information, and media server’s global settings. Top Menu: The top menu allows you to Create, Load, Save, Save As,…
Properties
Modulo Player Remote » Playlist tab » Layer settings » Properties
From here you can setup the geometry of your media: • Position: Enter the position of your media • Anchor mode: Choose the anchor mode: Type the start position in pixels, or configure it in relation to the pixel Worskpace. Center the center of the media on…
Transfer tab
Modulo Player Remote » Transfer tab
This tab allows you to upload media on the server. You can forward files using this interface when the playback application is either ‘on’ or pending (in standby). However, we strongly advise against uploading files when you are performing the show. Transfer…
Web
Modulo Player Remote » Media tab » Web
You can integrate a web page as a media. It enables you to integrate updated media dynamically from an external source (for instance you can use it for digital signage/dynamic display). *Do not use sophisticated or heavy web pages (as flash ones). It may have a…
Cue advanced settings
Tutorials – English » Training tutorials » Live Event » Live event-Multi playlists / User interface » Cue advanced settings
We will now copy/paste on cue 2 of playlist 2 to cue 2 of playlist 3. We will then replace the media with another media on cue 2 of playlist 3 It is possible to apply different colorimetric settings on each layer. To illustrate this, we will apply a color level change…
Playlist creation – first cue
Tutorials – English » Training tutorials » X-Map-Letter » Playlist creation – first cue
We will now copy the media to the server First create a new folder Then select the medias folders and copy them into the created folder Then go to the Media tab and click on the “Refresh” button to display the new media in the show Then go to the…
Add background
Tutorials – English » Training tutorials » Projection mapping » Add background
We will now project another media on the background behind the cube using the same projector. Open the General tab and increase the Pixel Workspace from 1920×1080 to 3840×1080. Open the Output tab and select the Main map above X-MAP1. Then add another…
Add cues
Tutorials – English » Training tutorials » Start project » Add cues
Add the Jingle1.mp4 media on cue 3. Set the Media mode to Last frame so the media will only play once. Add a fade in of 2 seconds. Now add the Jingle1_Loop.mp4 on cue 4 in loop mode and with a fade in of 2 seconds. We will set this cue to be read…
New show creation
Tutorials – English » Training tutorials » Start project » New show creation
General tab The General tab is used to configure global settings on your current Project that will be used when the Modulo Player server is launched with the current Project Folder configured. You can find more details on this tab in the General tab manual…
Test patterns
Tutorials – English » Training tutorials » Live Event » Live event : Starting the project » Test patterns
Refresh the view in the Media tab to display the media that were transferred in the first step. *Tip: You can hover the mouse over a thumbnail to display a larger preview. Create a new media by using the button. Select the Test Pattern. Click on the button to…
X-Map-Letter
Tutorials – English » Training tutorials » X-Map-Letter
In this exercise, we will: Use X-Maps to easily set media to shapes Create a corporate event playlist Use copy/paste to save time Use the Live Mixer Material required: 1 x pico projector 1 x mapping box 1 x kit of shapes 1 x media kit + PSD template file We…
Sources creation
Tutorials – English » Training tutorials » Live Event » Live event-Multi playlists / User interface » Sources creation
Creation of NDI Live sources, counter and text: NDI: We will now declare NDI Live Media to capture streamed sources with the “NewTek NDI” protocol: https://fr.newtek.com/ndi/ . NDI Info click here This protocol allows video streams to be transported using…
Project creation
Tutorials – English » Training tutorials » Projection mapping » Project creation
Open the Control tab and open the Settings panel to create a new project folder. Name it Projection Mapping. Start the Modulo Player application and transfer the media to the server: The Photoshop file will be used to automatically create X-MAPS and must be copied…
Projection mapping
Tutorials – English » Training tutorials » Projection mapping
In this second exercise we will go more in depth into the warping possibilities of Modulo Player. This exercise will cover: Project creation and media transfer Project different medias on 3 sides of a cube using a classic warping grid Manually creating X-MAPS to…
Video
Useful Guidelines » Media Creation » Video
You can read compressed files with the MPEG2, H264, HAP, or Apple ProRes codecs. We rather recommend the HAP codec, lighter to decode and directly managing the alpha channel. Apple ProRes is a good option for a direct workflow, very good quality and less intensive…
Decklink
Modulo Player Remote » Media tab » Decklink
You can use a Decklink capture card in order to add a HD-SDI, SDI or HDMI video stream. Name: Give a name to the media in order to find it easily on the media list Card Index: Choose the input id: first input is 0, second input is 1, etc. Input: Choose the input…
Playlist TC
Modulo Player Remote » Media tab » Playlist TC
This media generate a timecode synchronized with the timecode of the playlist. It’s an helper media to encode a show.
Advanced
Modulo Player Remote » Playlist tab » Layer settings » Advanced
In this tab, enable advanced features for the selected layer. Enable the features by clicking on the blue checkbox button. Advanced features are: Color, Mask, Crop, Clip, Border, Drop Shadow, Frame Edit. Color: Adjust the color levels for the selected layer. You…
Scrolling Text
Modulo Player Remote » Media tab » Scrolling Text
The Scrolling text editor allows you create a scrolling text. Change Speed, to make text appear slower or faster. You can delete text to remove media from media list.
Start project
Tutorials – English » Training tutorials » Start project
In this first exercise we will discover the Modulo Player software and learn the workflow of a project. We will learn to: Configure the settings for demo mode and for a real server Create the project folder Transfer Media Create a new show Create an output and…
Architectural video mapping
Tutorials – English » Training tutorials » Architectural video mapping
In this exercise, you will: Use X-Maps to easily set up a show on a building Create an architectural mapping playlist Use copy/paste to save time Add a Modulo Player device to recall sequences Use a calendar device to trigger a task Material required: 1 x…
Uncompressed option
Useful Guidelines » Media Creation » Uncompressed option
Uncompressed TGA image sequence (optional) Modulo Player servers with the uncompressed option can read TGA image sequences directly. For this option, you need to prepare a folder with the following name: media-name.tga. This folder should contain the TGA image…
Simple Text
Modulo Player Remote » Media tab » Simple Text
The simple text editor allows you to generate text directly on the Modulo Player server. Please remember to choose the media size finely to ensure the best quality. Click the «delete text» button if you want to remove it from the Media list.
Solid
Modulo Player Remote » Media tab » Solid
You can create a solid rectangle. You can select a color by typing RGB values. You can select the size in pixels. ClicK OK to close media configuration. Click Delete Solid to erase solid from media list.
Text
Modulo Player Remote » Media tab » Text
The text editor allows you to generate text directly on the Modulo Player server. Please remember to select the media size to ensure the best quality. Click the «delete text» button if you want to remove it from the Media list. Use available buttons to copy,…
Deltacast
Modulo Player Remote » Media tab » Deltacast
You can use a Deltacast capture card in order to capture a HDMI or HD-SDI, on SDI, DVI video stream. You can handle it as a media. For HD-SDI input board type: Configure settings in order to display media from the acquisition cards. Name: Assign a name in order to…
Counter
Modulo Player Remote » Media tab » Counter
You can generate counters or clock directly on the server in order to display them on onstage monitors. • Timecode type: up/down counter, clock • Text: Text you can display at the same time as the counter • Size: Please remember to choose the media size…
Modulo Player Remote
Modulo Player Remote
The Remote (control) software is easy to install on your notebook (Mac/PC). The interface is made of several pages to help you manage your project easily, even if you are an occasional user. The Remote software is “empty”, that is to say it does not contain…
Projection on moving screen with Digimap
Application notes » Projection on moving screen with Digimap
Projection on moving screen with Digimap function Set-up relies on: 1 x Modulo Player Pro with 1 output User-friendly and flexible management: Free Remote Control Software compatible with Mac/PC Show control: In this example, control of the videoprojector (internal…
Introduction
Introduction
Modulo Player, more than a media player Modulo Player is a cost-effective media server ideal for your everyday projects. Easy to learn, set-up, and operate, Modulo Player combines the extensive capabilities of a media server, and a live mixer. Seamlessly process…
Digimap-MIDI
Tutorials – English » Training tutorials » Workshop » Digimap-MIDI
We will now use a MIDI controller to interact with the content using digimap. The MIDI controller is connected to the server. For example, you can use NanoKontrol2 from Korg. We go to the MIDI controller setup and activate the input and choose NANOKONTROL2. you move a…
Playlist
Tutorials – English » Training tutorials » Live Event » Live event : Starting the project » Playlist
We will now create a Playlist. In the Playlist tab, create several cues. Leave Cue 1 empty as usual. On Cue 2, add the 3 test patterns on layers 1,2 and 3. Position them in the pixel space at their correct positions. Add a Fade in and Fade out time of 2 seconds…
Prepare Modulo Player for the calibration
Tutorials – English » Training tutorials » Autocalibration of 5 video-projectors on a dome » Prepare Modulo Player for the calibration
!Before moving forward, be sure the SpinView software is closed, otherwise Modulo Player will not be able to communicate properly with the camera. In this chapter we will prepare Modulo Player for the calibration. You can now start the Modulo Player Remote…
Création nouveau show
Tutoriels – Français » Tutoriels de formation » Start project » Création nouveau show
Onglet General L’onglet General vous permet de configurer des réglages globaux du Projet en cours qui seront utilisés lorsque le serveur Modulo Player est lancé avec le Project folder actuellement configuré. Vous pourrez trouver plus d’informations sur…
Sources creation
Tutorials – English » Training tutorials » Live Event » Live event-Mixer » Sources creation
We will add the 4 live sources in the mixer. We will learn how to create a source, assign a live media to this source. We can see that it is possible to retouch the colorimetry, to make a crop, to softer the edges or to apply a mask or keying. It is possible to use the…
Modulo Player
Modulo Player Remote » Devices tab » Modulo Pi » Modulo Player
Choose this device to control the Modulo Player application (internal action). Refer to Modulo Player external control if you want to control another Modulo Player. Settings: Name: User-friendly name Task action: Go cue Go Cue or Play Go Previous Cue Go Next…
General
Modulo Player Remote » Control » General
This tab is for general settings. Project folder: Remotely select the project folder on your media server. The project folder is always created and hosted in the Data hard drive of the media server (D:), never in the remote. The D: drive contains all media files,…
Control
Modulo Player Remote » Control
The Control tab is made of the following buttons: : Start the Modulo Player application on the media server. If the application is already running, this will relaunch the application. : Stop the Modulo Player application on the media server. : Restart the…
Live event-Multi playlists / User interface
Tutorials – English » Training tutorials » Live Event » Live event-Multi playlists / User interface
The second part of the exercise will allow you to extend the previous exercise and discuss the following concepts: The creation and use of NDI Live media and counter and text media The creation and use of several Playlists The use of Monitoring to visualize live…
Network setup
Starter guide » Modulo Player media server » Network setup
You need to check that you are on the same network as your Modulo Player media server. When you received your Modulo Player unit, the box included a sheet with the IP address of your media server. If you do not know how to setup an IP: Go on this page for a PC Go…
IP
Modulo Player Remote » Control » IP
You can change the default display name and IP of the media server. When you have several active ethernet adapters on the server, you can specify the default network interface that will be used for control and synchronization. You can also specify a dedicated…
Playlist creation – copy/paste
Tutorials – English » Training tutorials » X-Map-Letter » Playlist creation – copy/paste
We will now add the following cues Use the copy/paste function to save time Then replace the video media and the sound file Now copy and paste again to create cue 4. Put the trigger of cue 4 in Follow 1 mode: it will automatically follow at the end of cue 3…
Desktop
Modulo Player Remote » Media tab » Desktop
This function allows you to capture a part of your server’s Desktop in real time and use it in Modulo Player as a media. Configure the Desktop index to choose which Desktop screen you want to capture. Enter the width and height values of the Desktop’s pixel…
Project creation
Tutorials – English » Training tutorials » Architectural video mapping » Project creation
Create a new project folder and start the Modulo Player application. Copy the PSD file on the server, at the root of the project folder. Copy the media folder and place the two media test patterns for the calibration in it Then create a new Show …
Playlist creation
Tutorials – English » Training tutorials » Start project » Playlist creation
The Playlist tab is used to create and control the core of your show. You can find more details on this tab in the Playlist tab manual page. Open the Playlist tab and add several cues in the playlist using the button. *Note: It is good practice to always leave cue…
Cue with crossed layer
Tutorials – English » Training tutorials » Start project » Cue with crossed layer
We will now make a PiP appear while maintaining the loop on cue 4 playing in the background. Go to cue 5 and disable the first layer by clicking on the button for that layer. Layer 1 now appears as a crossed layer. This indicates that we will keep playing…
Software overview
Introduction » Software overview
Intuitive software Modulo Player works with a dedicated Modulo Player Remote, a control software designed to optimize setup, workflow management, and show control. No matter the number of media servers, one Modulo Player Remote is used to work on the server(s)…
Architectural video mapping
Tutoriels – Français » Tutoriels de formation » Architectural video mapping
Dans cet exercice, nous allons : Utiliser les X-Maps pour facilement caler un show sur un bâtiment Créer une playlist type mapping architectural Utiliser le copier/coller pour gagner du temps Ajouter un device Modulo Player pour rappeler des…
X-Map-Letter
Tutoriels – Français » Tutoriels de formation » X-Map-Letter
Dans cet exercice, nous allons : Utiliser les X-Maps pour facilement caler des médias sur des formes Créer une playlist type corporate event Utiliser le copier/coller pour gagner du temps Utiliser le Live Mixer Matériel nécessaire : 1 x vidéo-projecteur…
Start project
Tutoriels – Français » Tutoriels de formation » Start project
Ce premier exercice va permettre de découvrir le logiciel Modulo Player et de prendre en main le workflow d’un projet. Nous allons apprendre les notions suivantes : Réglage des settings en mode démo et sur un vrai serveur Création du dossier…
Live event-Mixer
Tutorials – English » Training tutorials » Live Event » Live event-Mixer
Following on from the previous exercise, we will discover the Live Mixer integrated in Modulo Player. We had previously used Live Media by integrating them into Playlists like other media but we will discover the multiple possibilities of the Mixer to go much further.…
Fx
Modulo Player Remote » Playlist tab » Layer settings » Fx
You can add effects to a media. • Click on the to open the effects list. • Select the effect you want, and click on OK • Modify its parameters and toggle the activation with the blind icon • To completely delete an effect, select it and click on the…
Version 5.2
Changelog » Version 5.2
Global: Integration of Stream Deck to recall Tasks Updated icons and cleanup Auto-backup options Possibility to directly set default IP and media server name from remote Right click on color editor for cues, tasks,…: Open a color dialog box Media ID: new dialog…
Projection mapping
Tutoriels – Français » Tutoriels de formation » Projection mapping
Ce second exercie permet de voir plus en détails les possibilités de warping de Modulo Player. Cet exercice couvrira : Création de projet et transfert de médias Projection de différents médias sur 3 côtés d’un cube en utilisant une grille de warp…
Presentation + demo of Modulo Player
Webinars – English » Presentation + demo of Modulo Player
Presentation + demo of Modulo Player: This webinar offers a presentation of Modulo Player, our cost-effective media server solution. To easily navigate through the video, see the menu below: 0:00 – Introduction 1:45 – Modulo Pi in brief 3:16 –…
Transfert des médias
Nous allons maintenant transférer les médias sur le serveur (ou dans le dossier du portable en mode démo mais en simulant un transfert réseau comme avec un vrai serveur). Nous allons dans l’onglet Transfer : La partie de gauche liste les dossiers…
Companion Apps
Companion Apps
Companion Apps Modulo Player comes with a series of companion apps designed to further enhance your experience working with our media server: ModuloDMXTool: Send and receive Art-Net DMX from/to any device Modulo Panel: Access your custom user panels on Android or…
Ajout de cues
Tutoriels – Français » Tutoriels de formation » Start project » Ajout de cues
Ajoutez le média Jingle1.mp4 sur le cue 3. Réglez le Media mode sur Last frame pour que le média ne soit lu qu’une fois. Ajoutez un fade in de 2 secondes. Ajoutez maintenant le media Jingle1_Loop.mp4 sur le cue 4 en mode loop et avec un fade in de 2…
Playlist creation
Tutorials – English » Training tutorials » Architectural video mapping » Playlist creation
Now let’s create the show’s playlist Add 2 more cues Leave cue 3 empty, add the castle-1-UV media and the associated sound file in cue 4 Put a Fade In time of 2 seconds on this cue. Now add a Fade Out to cue 4: Add an empty cue 5 called FADE OUT Add a…
Playlist Overview
Modulo Player Remote » Playlist tab » Playlist Overview
Global Overview: At the top of the page, underneath the general menu bar, choose the playlist you want to edit (tabs) (cf ). You can create a new playlist clicking on the button (cf ) . If you want to delete a playlist, shuffle playlists order, or rename a…
Live sources creation
Tutorials – English » Training tutorials » Live Event » Project transfer on the Media Server » Live sources creation
Now let’s add Live Deltacast media to the show.
Outputs tab
Modulo Player Remote » Outputs tab
This tab allows you to set up the media server’s outputs. This tab is only accessible when the media server application is already running (green indication). Two different types of outputs can be created: A video output: To use on a screen, LED wall, or a…
Live Event
Tutoriels – Français » Tutoriels de formation » Live Event
Dans ce troisième exercice nous allons apprendre à encoder un show typique des événements live impliquant plusieurs projecteurs et moniteurs. Ce show simulera un corporate event annonçant le lancement d’une nouvelle voiture. Voici une visualisation 3D du…
Live Event
Tutorials – English » Training tutorials » Live Event
In this third exercise, we will learn how to setup a show typical of live events involving multiple projectors and screens. This show will simulate a corporate event announcing the launch of a new car. Here is a 3D preview of the final setup. It will involve the…
Playlists creation
Tutorials – English » Training tutorials » Live Event » Live event-Multi playlists / User interface » Playlists creation
The creation and use of several Playlists We will now add several playlists in order to be able to launch different content in independent ways. Click on the + button and add 4 playlists. We will now rename the playlists and add a color to make them easier to…
Multi-projector auto-calibration
Multi-projector auto-calibration
Description Achieve a perfectly warped and blended projection in minutes with Modulo Pi’s autocalibration solution. Available as an option for the Modulo Player and Modulo Kinetic series of media servers, the autocalibration feature is designed to automatically…
Digimap-interactive panel
Tutorials – English » Training tutorials » Workshop » Digimap-interactive panel
We will use a sensor to track the movement of a panel and project content positioned on it. We will see how the sensor is used to move a panel and track the media on it. We will then see how to make an x-ray effect to reveal an image. We will finally see how to use…
X-Maps warping
Tutorials – English » Training tutorials » Architectural video mapping » X-Maps warping
First, import the Photoshop PSD file. Then go to the Media tab and click on the “refresh” button to load the media previously copied into the show. Then, go to the Playlist tab. Add cues, leave the cue 1 empty. Load the test Pattern into cue 2 You can…
X-Map
Modulo Player Remote » Outputs tab » X-Map
For the most complex shapes, our exclusive X-Map function will help you save time and money. Most of the mappings on our Showcase gallery are done using this smart and user-friendly feature. When having different levels of depth on your projection surface or a…
Transfert des médias
Tutoriels – Français » Tutoriels de formation » Start project » Transfert des médias
L’onglet Transfer vous permet de copier des fichiers et médias depuis l’ordinateur du Modulo Player Remote vers le serveur Modulo Player. Vous pourrez trouver plus d’informations sur cet onglet dans sa page de manuel. Dans cet onglet : La partie…
ISF
Tutorials – English » Training tutorials » Workshop » ISF
We will learn how to integrate an ISF effect into Modulo Player. Modulo Player integrates an effect database applicable to any media (image, video or live) but it is possible to create an ISF effect yourself if you have GLSL opengl shader databases or more simply to…
LED Mapping
Modulo Player Remote » Outputs tab » LED Mapping
Use the LED mapping feature to convert a video to several Art-Net universe using the fast GPU in real-time. To add a LED Mapping, click on the button and choose LED mapping on the popup menu. A new LED Mapping output is then created. *A LED mapping output counts…
Digimap tab
Modulo Player Remote » Digimap tab
The Digimap tab allows you to take control of some playlist parameters from a sensor or an external device. This way, you can add interactivity to your show. For instance, you can move a panel on a stage (with the projection moving along with it). You can…
Kinesys
Modulo Player Remote » Devices tab » Tracking » Kinesys
Choose this device to receive motion information from the Kinesys K2 solution. Settings: Name: User-friendly name Multicast: Choose Multicast mode or unicast (multicast is the default value) IP: Enter the ip address of the multicast network (default value is…
Project creation
Tutorials – English » Training tutorials » Live Event » Live event : Starting the project » Project creation
Open the Control tab and open the Settings panel to create a new project folder. Name it Car Show. Start the Modulo Player application and transfer the media to the server.
Basic setup and start of Modulo Player Lite
Starter guide » Modulo Player Lite » Basic setup and start of Modulo Player Lite
Your Modulo Pi key is activated, your Modulo Player Lite and Modulo Player Remote are installed. Now, it’s time to play! Firewall and antivirus: First, check that your antivirus will not prevent the applications to launch or to communicate. Usually, an…
Live event : Starting the project
Tutorials – English » Training tutorials » Live Event » Live event : Starting the project
The first part of the exercise will start the project from an empty show. We will cover the following concepts: Project creation & Media copy Configuring the outputs Using Monitoring Playlist creation Making cues reminders Using the Modulo Wing companion…
Version 5.5
Changelog » Version 5.5
Version 5.5.7 – April 18, 2022: Drivers: We recommend to use new AMD drivers (Download the last version): For Windows 10: 20Q2.1 For Windows 7: 20Q1 You need to update the Deltacast drivers to 6.16.01 version (Install the last version). New…
Generate a dongle context file
How-To » Generate a dongle context file
You have two options to generate a dongle context file: Directly from the Modulo Player remote From the Modulo Player server (or notebook with Lite edition) !If you need to update several applications at once on the same dongle (for example Modulo Player and…
Setup the IP address of your MAC
How-To » Setup the IP address of your MAC
First open the control panel. Go on the top menu and choose System preferences. Then choose Network. Choose your adapter and select manually Configure IPV4 to force a manual IP address. Choose an free IP in your network that is on the same network as your Modulo…
Modulo Panel
Tutorials – English » Training tutorials » Live Event » Live event-Multi playlists / User interface » Modulo Panel
Using Modulo Panel !Be careful, the Modulo Panel application will only be able to connect to the server if the computer or tablet is in the same address range as the Modulo Player. the Modulo Panel application is installed on the laptop or on a tablet / phone…
Playlist tab
Modulo Player Remote » Playlist tab
The Playlist tab allows you to playback your medias. You can create any number of Playlists. Each Playlist plays independently. In each Playlist, you can have any number of cues. A cue is a playback state: Each cue can have up to 10 layers of media playing…
Transition
Modulo Player Remote » Playlist tab » Layer settings » Transition
In this tab, you can apply basic transitions for live media. For more complex setup, we advise you to use the new Live Mixer user interface instead. • Choose from a list of transition effects: - Last State: Transition from one point to the other starting from…
Intro to Modulo Player and Modulo Kinetic
Webinars – English » Intro to Modulo Player and Modulo Kinetic
An introduction to Modulo Player and Modulo Kinetic: This webinar offers an introduction to our media servers: Modulo Player and Modulo Kinetic. To easily navigate through the video, see the menu below: 0:00 – Introduction 1:50 – Modulo Pi in…
Création du projet
Tutoriels – Français » Tutoriels de formation » Projection mapping » Création du projet
Ouvrez l’onglet Control et ouvrez le panel Settings pour créer un nouveau projet. Nommez le Projection Mapping. Démarrez l’application Modulo Player et transférez les médias vers le serveur : Le fichier Photoshop sera utilisé pour créer…
Test patterns
Tutoriels – Français » Tutoriels de formation » Live Event » Live event : Lancement du projet » Test patterns
Rafraichissez la vue dans l’onglet Media pour afficher les médias transférés dans la première étape. *Tip: Vous pouvez survoler la souris au-dessus d’une vignette pour afficher un preview plus grand. Créez un nouveau média en utilisant le bouton…
Test Pattern
Modulo Player Remote » Media tab » Test Pattern
This media generates a test pattern. You can adjust many parameters: Width & height: Resolution of your pattern Quad width & height: Size of each quad Color pattern type: Two different color themes It’s possible to enable a border, adjust the…
Architectural mapping
Application notes » Architectural mapping
Architectural mapping configuration Set-up relies on: 2 x Modulo Player Standard with 4 outputs Versatile display capabilities: Multi-projector soft edge blending Video mapping with 2D warping tools incl. X-Map function Powerful image & video playback Monitoring…
Playlist
Tutoriels – Français » Tutoriels de formation » Live Event » Live event : Lancement du projet » Playlist
Nous allons maintenant créer une playlist. Dans l’onglet Playlist, créez plusieurs cues. Laissez le Cue 1 vide, pour l’état neutre. Sur le Cue 2, ajoutez les 3 test patterns sur les layers 1, 2 et 3. Positionnez les correctement dans l’espace…
Live Mixer
Live Mixer
Embedded Low-Latency Live Mixer As a world’s first, Modulo Player embeds a low-latency live mixer with all main functionalities of a mixer: Live program, preview, and confidence screens, presets management, transition effects,… Modulo Player is a multi-user…
Multi-projector auto-calibration for a dome
Application notes » Multi-projector auto-calibration for a dome
Multi-projector auto-calibration in dome configuration Set-up relies on: 1 x Modulo Player Pro with 6 outputs 1 x dongle with Auto-Calibration option for 6 outputs 1 x PoE camera (not-included) Powerful Auto-Calibration module: Multi-projector automatic edge blending…