![]()
This device allows you to receive or send MIDI event and receive MTC MIDI Timecode.
You need to add a USB external MIDI interface to use this device.
Settings:
| Name |
User-friendly name |
| Enable |
Activate to enable the device |
| Run at startup |
Activate to run the device at Kinetic startup |
| MMC TC |
choose MidiTimecode Framerate |
| Input Enable |
Enable or disable input |
| Input Port |
Choose Input port from list |
| Output Enable |
Enable or disable output |
| Output Port |
Choose output port from list |
| Timecode Type |
Choose from list |
Task action:
| Note On/Off |
Channel value (range 1-16), Note (range 1-128), Velocity (1-128) |
| Control Change |
Channel value (range 1-16), Control (range 1-128), Value (1-128) |
| Program change |
Channel value (range 1-16), Program(range 1-128) |
| MMC Stop/Play |
Device Id value (range 0:127) |
| MMC Deferred Play |
Device Id value (range 0:127) |
| MMC Fast Forward |
Device Id value (range 0:127) |
| MMC Rewind |
Device Id value (range 0:127) |
| MMC Punch In |
Device Id value (range 0:127) |
| MMC Punch Out |
Device Id value (range 0:127) |
| MMC Pause |
Device Id value (range 0:127) |
| MMC Goto |
Device Id value (range 0:127), Timecode (hh:mm:ss:ff) |
Task trigger:
| Note On |
Channel value (range 1-16), Note (range 1-128), Velocity (1-128) |
| Note On No Velocity |
Channel value (range 1-16), Note (range 1-128) |
| Note Off |
Channel value (range 1-16), Note (range 1-128), Velocity (1-128) |
| Control Change: |
Channel value (range 1-16), Control (range 1-128), Value (1-128) |
| Program change: |
Channel value (range 1-16), Program(range 1-128) |
Digimap trigger:
| Note On/Off |
Channel value (range 1-16), Note (range 1-128) |
| Control change |
Channel value (range 1-16), Control (range 1-128) |
| Program Change |
Channel value (range 1-16) |
Graph:
| Receive Note On |
Receive note on from midi device, Channel value (range 1-16), Note (range 1-128), Velocity (1-128) |
| Receive Note Off |
Receive note off from midi device, Channel value (range 1-16), Note (range 1-128), Velocity (1-128) |
| Receive Program Change |
Receive program change from midi device, Channel value (range 1-16), Program(range 1-128) |
| Receive Control Change |
Receive control change from midi device, Channel value (range 1-16), Control (range 1-128), Value (1-128) |
| Send Note On |
Send note on from midi device, Channel value (range 1-16), Note (range 1-128), Velocity (1-128) |
| Send Note Off |
Send note off from midi device, Channel value (range 1-16), Note (range 1-128), Velocity (1-128) |
| Send Program Change |
Send program change from midi device, Channel value (range 1-16), Program(range 1-128) |
| Send Control Change |
Send control change from midi device, Channel value (range 1-16), Control (range 1-128), Value (1-128) |
User interface:
N/A
Device information:
See here more information about MIDI protocol.
!USB 2.0 MIDI devices should be always be plugged in a USB 2.0 port.
The MIDI devices should be always be Power On and plugged in the server before launching Modulo Player.
If the MIDI is accidentally unplugged during a show, you should restart Modulo Player application after re-plugging it.
Example: create a task to launch a Midi note
Example: launch a Midi note by the timeline
Example: trigger a task with midi
This device allows you to receive or send MIDI event and receive MTC MIDI Timecode.