This device allows you to control Panasonic video-projectors and many other brands that support this protocol.
Settings:
Name: User-friendly name
IP: Enter the ip address of your video projector. Your device and Modulo Player need to be in the same subnet
Port: TCP/IP port. 4352 is the default value (usually doesn’t have to be changed)
Authentification Off/On: Enables the authentification. Most of the time, it’s necessary to activate the authentification. You need to match the Pjlink settings in your projector with this setup
Password: If authentification is enable, you need to enter the password corresponding to your device. If you don’t know the password, go to the user manual of your video projector and search for PjLink, you will find the default password
Task action:
Command available:
Power On/Off
Picture Mute On/Off
Input RGB (value)
Input Video (value)
Input Digital (value)
Input Storage (value)
Input Network (value)
Shutter On/Off
Task trigger:
N/A
Digimap trigger:
N/A
User interface:
You can add this device in any user panel. You can then choose the available features in the panel.
Device information:
Go to the manufacturer website for more information.
Need more help with this?
Don’t hesitate to contact us here.