Working with a Modulo V-Node
Connect the devices to the right connector on the graphics card (order from top to bottom)
- Video projecteur 1 for the cyclo left side
- Video projecteur 2 for the cyclo right side
- Reminder projector
- The speaker feedback
We will now force EDIDS and create an extended desktop with 4 screens:
In the menu, go to V-Node > Remote Settings.
Control/Settings/AMD/EDID select the first 4 outputs and choose an EDID 1920×1080@50P from the list and click on Force EDID.
Control/Settings/AMD/Eyefinity: select the first 4 outputs and click on create Eyefinity. We choose an arrangement of 4 horizontal screens ( Cols:4 Rows:1).
Go back to the Control tab and Start V-Node.
The server indicator light should turn from red to orange, that means it is ready.
Note the IP address of the V-Node for the next step.
Add and set the V-Node on Kinetic Designer
- Add a V-Node
- Define its IP Address
- Click on the V-Node, in the Editor Tab and indicate the size of our V-Node’s EYEFINITY which is 7680×1080
Need more help with this?
Don’t hesitate to contact us here.