Choose this device to control a digital cinema processor QSC DCP.
Settings:
| Name | User-friendly name |
|---|---|
| IP | Enter the IP address of your device. Your device and Kinetic Designer need to be in the same subnet |
| Port | TCP/IP port 4448 is the default value (usually doesn’t have to be changed) |
| Type | Choose the corresponding version from list |
Task action:
| Enable device | Enable the device |
|---|---|
| Disable device | Disable the device |
| Recall preset | recalls specific preset |
| Mute On | mute device on |
| Mute Off | mute device off |
| Set Volume | sets volume to specific value |
| Increase Course Volume | increase the course volume |
| Decrease Course Volume | decrease the course volume |
| Increase Fine Volume | increase the fine volume |
| Decrease Fine Volume | decrease the fine volume |
| Amps On | sets amps On |
| Amps Off | sets amps Off |
Task trigger:
N/A
Digimap trigger:
N/A
User interface:
N/A
Device information:
Go to the manufacturer website for more information.
Need more help with this?
Don’t hesitate to contact us here.