Tracking hardware config

Select the corresponding serial COM port (go to device manager to find the serial port created when you plugged the first beacon) and click on connect.
Click on refresh button, to refresh the list of available COM port.

Beacon setup:

You can change the radio channel. You need to have a matching radio channel on hardware sync and beacons.
You can set the brightness of leds. a higher brigthness will decrease the lifetime of the battery.
You can have more brightness if you enable only the first 4 LED and set the brightness to 100%.
Choose a batch id and click on generate to change the LED ID.
Don’t forget to click on apply after doing a change to save the config in the beacon.

Active Sync box setup:

You can change the radio channel. You need to have a matching radio channel on hardware sync and beacons.
click on apply to do a change.