Choose this device to connect to a 16x Isolated Digital Input Phidget DAQ1301_0
If you need to read a whole bunch of logic-level signals, this input module adds sixteen active-high digital inputs using just one port on your VINT Hub.
They’re also more resilient than a VINT port running in digital input mode, able to withstand up to 30V.
Whether you’re reading buttons, switches, or logic-level outputs from other devices, this module offers the most efficient use of your VINT ports.
Settings:
| Name | User-friendly name |
|---|---|
| Enable | Activate to enable the device |
| Run at startup | Activate to run the device at Kinetic startup |
| Serial Number: | Enter the serial number of the VINT HUB Phidget |
| Port: | Choose port number of the VINT HUB Phidget |
Task action:
N/A
Task trigger:
You can trigger a task on a change of the state of the inputs.
Digimap trigger:
N/A
Graph:
N/A
User interface:
You can add this device in any user panel.
You can then display the digital input state.
Device information:
Go to this page for more information.
You need to plug this device to a VINT HUB Phidget.
Need more help with this?
Don’t hesitate to contact us here.