Add an output

Output

We will now create an output with a resolution of 1920×1080.

In the V-Nodes panel, select VN01 and in the Editor panel, in the Output tab click on and choose Output.

Select the Output and then open the Shape subtab in the Editor panel.

Switch the Curve Type to Keystone, the most suitable mode for a basic flat screen.

Warp

Still in the Shape tab set the Test Pattern to Softedge to display a grid on the output.

Open the Warp panel and move the 4 control points to adjust the grid to the back of the mapping box.

Right-click on the Output and click on Display on side screen

A small window will open displaying the output.

If you’re computer is connected to a second screen or video projector, the window will automatically fit your screen.

*The flashes of color you experience on the output are normal and due to the Demo mode.

Once you are done, go back to the Preview tab to follow the rest of the tutorial.

!If you are connected to a V-Node server: you will need to toggle the V-Node Online to display the Output. When using the V-Node, the outputs will not blink.