Choose this device to connect to a Phidgets 2× 2A DC Motor DCC1003_0
Control two DC motors from one VINT port with this compact motor controller.
Settings:
| Name | User-friendly name |
|---|---|
| Enable | Activate to enable the device |
| Run at startup | Activate to run the device at Kinetic startup |
| Serial Number: | Enter the serial number of the VINT HUB Phidget |
| Port: | Choose port number of the VINT HUB Phidget |
| interval ms: | Choose the refresh interval in milliseconds |
| Velocity: | set the velocity value* |
| Acceleration: | set the acceleration value* |
| Braking: | set the braking value* |
| Power limit value: | set the power limit value* |
Task action:
| Enable device | enable the device |
|---|---|
| Disable device | disable the device |
| Set limit | set power limit value |
| Set velocity | set velocity value |
| Set acceleration | set acceleration value |
| Move to | set acceleration and velocity value |
Task trigger:
N/A
Digimap trigger:
N/A
Graph:
N/A
User interface:
N/A
Device information:
Go to this page for more information.
You need to plug this device to a VINT HUB Phidget.
Need more help with this?
Don’t hesitate to contact us here.