Eliko UWB provides low-latency, high accuracy (10-50 cm), reliable and real-time (~10ms latency) tracking while keeping installation costs optimal.
Settings
| Property | Default | Description |
|---|---|---|
| Name | Eliko | User-friendly name. |
| Enable | ON | Activate to enable the device. |
| Run at startup | ON | Activate to enable the device at Kinetic startup. |
| IP | [empty] | Enter the IP address of your device. Your device and Kinetic Designer should be on the same subnet. |
| Port | 25025 | TCP/IP port used by the device. Do not change unless you know what you are doing. |
Task action
| Action | Description |
|---|---|
| Enable | Enable the device. |
| Disable | Disable the device. |
Task trigger
This device has no actions that can trigger a Task.
Digimap trigger
This device has no actions that can trigger a Digimap.
Graph
| Action | Description |
|---|---|
| Receive Position | Receive position from the Eliko Tracker device |
User interface
This device has no actions that can be launched from the UI designer.
Device information
Check the manufacturer website for more information.
Need more help with this?
Don’t hesitate to contact us here.