Select this device to receive PosiStageNet information from the tracking server.
PosiStageNet is an open protocol enabling the broadcast of 3 dimensional position coordinates, velocity, orientation and acceleration data of objects tracked on stage.
Settings
| Property | Default | Description |
|---|---|---|
| Name | PosiStage server | User-friendly name. |
| Enable | ON | Toggle to enable/disable the device. |
| Run at startup | ON | Toggle to enable the device when Kinetic Designer is launched. |
| IP | 236.10.10.10 | Set the IP address of your device. Your device and Kinetic Designer should be on the same subnet. |
| Port | 56565 | TCP/IP port used by the device. |
| Filter enable | OFF | Toggle to enable a Kalman filter on the data. |
| Filter Options | These options are only visible if Filter enable is set to ON |
|
| Process noise cov | 0.001 | Affects the weight of predictions in the algorithm. Lower values (<0.1) will give smoother signals but less accurate predictions. |
| Measurement noise cov | 5.0 | Affects the weight of measures in the algorithm. Higher values (>10) will give smoother signals but less accurate values. |
| Error cov post | 0.01 | Affects uncertainty in the initialisation of the algorithm. If your starting position is accurate, prefer lower values. If not, prefer higher values. |
| Delay | 0.0 | Useful when compensating for projector input lag. Leave at 0 otherwise. |
Task action
| Action | Description |
|---|---|
| Enable device | Enable the device |
| Disable device | Disable the device |
Task trigger
This device has no actions that can trigger a Task.
Digimap trigger
N/A
Graph
| Action | Description |
|---|---|
| Receive position | Receive 3 dimensional tracker position information from the PosiStage Server |
User interface
This device has no actions that can be launched from the UI designer.
Device information
Go to the official website for more information.
Need more help with this?
Don’t hesitate to contact us here.