TWAIN and WIA are protocols for scanned images.
This device is compatible with any scanner either directly connected to the Kinetic Designer workstation with a USB cable or connected to a Modulo Bridge device that is connected to the Designer’s network.
Settings
| Property | Default | Description |
|---|---|---|
| Name | Scanner | User-friendly name. |
| Enable | ON | Activate to enable the device. |
| Run at startup | ON | Activate to enable the device at Kinetic startup. |
| Network Bridge | OFF | Toggle to enable the detection of the device via a Modulo Bridge device on the network. |
| IP | [empty] | (Only if Network Bridge is enabled) Set the IP for the Modulo Bridge device on which the scanner is locally connected. |
| Scanner | [empty] | Select the scanner. |
| Log enable | OFF | Activate to create a log file on the remote device. |
Task action
| Action | Description |
|---|---|
| Enable | Enable the device. |
| Disable | Disable the device. |
Task trigger
This device has no actions that can trigger a Task.
Digimap trigger
This device has no actions that can trigger a Digimap.
Graph
| Action | Description |
|---|---|
| Scan | Remotely trigger a scan on the device. |
User interface
This device has no actions that can be launched from the UI designer.
Device information
Go to the manufacturer website for more information.
Need more help with this?
Don’t hesitate to contact us here.