Choose this device to connect to a Phidgets 4 digital outputs OUT1100_0
If the 3.3V digital output mode of your hub’s VINT port is not powerful enough, or if you just need more digital outputs, this cost-effective output module has you covered. This board adds four 5V digital outputs to your VINT hub, allowing you to control LEDs, relays, and other logic-level electronics
Settings:
| Name | User-friendly name |
|---|---|
| Enable | Activate to enable the device |
| Run at startup | Activate to run the device at Kinetic startup |
| Serial Number: | Enter the serial number of the VINT HUB Phidget |
Task action:
| Enable device | enable the device |
|---|---|
| Disable device | disable the device |
| Switch outputs | select outputs and assign a voltage value |
Task trigger:
N/A
Digimap trigger:
N/A
Graph:
N/A
User interface:
You can add this device in any user panel.
You can then display the outputs values.
Device information:
Go to this page for more information.
You need to plug this device to a VINT HUB Phidget.
Need more help with this?
Don’t hesitate to contact us here.