Select this device to control Epson video projectors.
Settings
| Property | Default | Description |
|---|---|---|
| Name | Epson | User-friendly name. |
| Enable | ON | Toggle to enable/disable the device. |
| Run at startup | ON | Toggle to enable the device when Kinetic Designer is launched. |
| IP | [empty] | Set the IP address of your device. Your device and Kinetic Designer should be on the same subnet. |
| Port | 3629 | TCP/IP port used by the device. |
| ID | 0 | Set the projector ID. |
Manual controls of the Epson device in the Editor panel.Task action
| Action | Description |
|---|---|
| Enable device | Enable the device |
| Disable device | Disable the device |
| Power On | Send Epson power on command |
| Power Off | Send Epson power off command |
| Shutter On | Send Epson shutter on command |
| Shutter Off | Send Epson shutter off command |
| Freeze On | Send Epson freeze on command |
| Focus Min | Set to min focus value |
| Focus Max | Set to max focus value |
| Focus Decrement | Decrease focus value |
| Focus Increment | Increase focus value |
| Focus Off | Disable focus control |
| Zoom Min | Set to min zoom value |
| Zoom Max | Set to max zoom value |
| Zoom Decrement | Decrease zoom value |
| Zoom Increment | Increase zoom value |
| Zoom Off | Disable zoom control |
| ShiftHorizontal Min | Set to min horizontal shift value |
| ShiftHorizontal Max | Set to max horizontal shift value |
| ShiftHorizontal Decrement | Decrease horizontal shift value |
| ShiftHorizontal Increment | Increase horizontal shift value |
| ShiftHorizontal Off | Disable horizontal shift control |
| ShiftHorizontal Init | Initialize horizontal shift control |
| ShiftVertical Min | Set to min vertical shift value |
| ShiftVertical Max | Set to max vertical shift value |
| ShiftVertical Decrement | Decrease vertical shift value |
| ShiftVertical Increment | Increase vertical shift value |
| ShiftVertical Off | Disable vertical shift control |
| ShiftVertical Init | Initialize vertical shift control |
| OSD On | Send Epson OSD on command |
| OSD Off | Send Epson OSD off command |
| Recall Lens Position | Recall lens position value |
| Save Lens Position | Save lens position value |
| Delete Lens Position | Delete lens position value |
| Recall Memory | Recall memory value |
| Save Memory | Save memory value |
| Delete Memory | Delete memory value |
Task trigger
This device has no actions that can trigger a Task.
Digimap trigger
This device cannot be used as a Digimap trigger.
Graph
This device has no properties that can be read or written from a Graph.
User interface
When drag & dropped into a UI Panel the following commands are available:
Manual controls of the Epson device in a UI panel.Device information
Check Epson’s website for more information on their video projectors.
Need more help with this?
Don’t hesitate to contact us here.