Choose this device to connect to a Phidgets isolated solid state relay 16 outputs REL1101_0
For applications that require a ton of outputs, this module is the one you’re looking for.
With sixteen PWM-enabled relay outputs, it can be used to control devices and switch circuits of up to 30V volts and 8 amps. LED strips, DC motors, power relays, fans and other small circuits are all common loads for this type of output.
Settings:
| Name | User-friendly name |
|---|---|
| Enable | Activate to enable the device |
| Run at startup | Activate to run the device at Kinetic startup |
| Serial Number: | Enter the serial number of the VINT HUB Phidget |
| Port: | Choose port number of the VINT HUB Phidget |
Task action:
| Enable device | enable the device |
|---|---|
| Disable device | disable the device |
| Switch outputs | select outputs and assign a voltage value |
Task trigger:
N/A
Digimap trigger:
N/A
Graph:
N/A
User interface:
You can add this device in any user panel.
You can then display the outputs values.
Device information:
Go to this page for more information.
You need to plug this device to a VINT HUB Phidget.
Need more help with this?
Don’t hesitate to contact us here.