Choose this device to receive motion information from the Kinesys K2 solution.
Settings:
| Name | User-friendly name |
|---|---|
| Enable | Activate to enable the device |
| Run at startup | Activate to run the device at Kinetic startup |
| Multicast | Choose Multicast mode or unicast (multicast is the default value) |
| IP | Enter the ip address of the multicast network (default value is 239.195.0.1) |
| Port | UDP port. 6061 is the default value (usually doesn’t need to be changed) |
Task action:
| Enable device | enable the device |
|---|---|
| Disable device | disable the device |
Task trigger:
N/A
Digimap trigger:
Use the Kinesys data as an input for Digimap.
| Axis | choose X/Y/Z/Rotx/Roty/RotZ_ axis of the construct ID you want to map on this Digimap |
|---|---|
| Construct ID | Choose the construct ID that you want to map on this Digimap |
User interface:
N/A
Graph:
| Receive position | receive position fromKinesys device |
|---|
Device information:
Go there have more information about Kinesys Media Server protocol.
Short tutorial:
You can download a sample show K2 created by Kinesys and download a sample show for Modulo Player that works together.
You can download a demo version of the K2 on the Kinesys website.
Watch this video to understand how to setup:
Need more help with this?
Don’t hesitate to contact us here.