Part 4 : Migrating to the media server

In this final part of the exercise we will see how to set up the project on the V-Node Media Server as we would in a real life scenario.

We will review the following notions:

• Server configuration
• Transfering the project folder
• Calibrating and blending the two video projectors for the main screen
• Setting up the Live SDI and/or HDMI sources
• Repatching the sources in the Live Mixer

Demo vs Server

In the certification course, this tutorial is designed to be programmed on Kinetic Designer and then to be pushed to a V-Node server properly configured and displaying on 2 video-projectors and two monitors. One monitor simulates the two reminder projections, and the other simulates the confidence screen.

If you have access to a V-Node server, you can experience the full extent of this tutorial by connecting your Kinetic Designer to it and using all four of its outputs.

If you are running the demo version on your own laptop and do not have access to a V-Node server, you will only be able to see one output at a time and this output will display flashes of colors. This is normal and due to the demo version.