The Powerbox enables piloting 2 AC power circuits with a total maximum power output of 16A.
Both circuits can be independently switched ON/OFF.
Settings
| Property | Default | Description |
|---|---|---|
| Name | Powerbox | User-friendly name. |
| Enable | ON | Activate to enable the device. |
| Run at startup | ON | Activate to enable the device at Kinetic startup. |
| IP | [empty] | Enter the IP address of your device. Your device and Kinetic Designer should be on the same subnet. |
Task action
| Action | Description |
|---|---|
| Enable device | enable the device |
| Disable device | disable the device |
| Switch On 1 | Switch on channel 1 |
| Switch Off 1 | Switch off channel 1 |
| Switch On 2 | Switch on channel 2 |
| Switch Off 2 | Switch off channel 2 |
Task trigger
This device has no actions that can trigger a Task.
Digimap trigger
This device has no actions that can trigger a Digimap.
Graph
This device has no actions available in a Graph.
User interface
When drag & dropped into a UI Panel the following commands are available:
Device information
Check the manufacturer website for more information.
Need more help with this?
Don’t hesitate to contact us here.