Choose this device to connect to a Phidgets Touch Keypad HIN1000_0
For a seamless user input solution that differs from the ordinary pushbutton, try the Touch Keypad Phidget.
It works like a smartphone’s touchscreen, sensing the change in capacitance as you finger comes near.
As such, you can place the Touch Keypad Phidget behind up to 3mm of glass or plastic, allowing you to enclose the hardware to make the panel child-friendly and aesthetically pleasing.
Settings:
| Name | User-friendly name |
|---|---|
| Enable | Activate to enable the device |
| Run at startup | Activate to run the device at Kinetic startup |
| Serial Number: | Enter the serial number of the VINT HUB Phidget |
| Port: | Choose port number of the VINT HUB Phidget |
| Data interval ms: | Choose the refresh interval in milliseconds |
Task action:
N/A
Task trigger:
Choose to trigger on pressed or released and choose on which button.
Digimap trigger:
N/A
Graph:
| Key 0 to 3 | get the state of key 0 to 3 |
|---|---|
| Key 4 to 6 | get the state of key 4 to 6 |
User interface:
N/A
Device information:
Go to this page for more information.
You need to plug this device to a VINT HUB Phidget.
Need more help with this?
Don’t hesitate to contact us here.