Audio

You can choose the renderer mode and the soundcard to playback sound.

MME: You can set up the audio rendering engine. By default, Modulo Player uses the Windows audio mixer (MME) to play 44.1kHz or 48kHz stereo audio files (up to 7.1 depending on your sound card).

ASIO: If your sound card can handle the ASIO audio rendering engine, use this to have a lower latency or a higher number of outputs (Audio Pro card only). In this mode, you have to select the sample rate in the setup beforehand (44.1kHz or 48kHz) and only play audio files that match this sample rate.

Latency mode: You must use the “max” latency. Even with this settings, the latency will be very small. Please note that to avoid clicks, it’s better to have the maximum latency.

!USB 2.0 sound-cards should always be plugged in a USB 2.0 port.
The sound card should always be on “Power On” and plugged in the server before launching Modulo Player.
If the card is accidentally unplugged during the show, you should restart the Modulo Player application only after re-plugging it in.

!Virtual Audio Soundcard: We strongly recommend you use a hardware Pcie or USB soundcard instead of a virtual sound card (for example for Dante).