This device can control the LINUS DSP amplifiers of CODA Audio.
Settings
| Property | Default | Description |
|---|---|---|
| Name | Coda Linus | User-friendly name. |
| IP | [empty] | Enter the IP address of your device. Your device and Modulo Player should be on the same subnet. |
| Port | 3000 | TCP/IP port used by the device. Do not change unless you know what you are doing. |
Task action
| Action | Description |
|---|---|
| Power Off | Power off the amplifier |
| Power On | Power on the amplifier |
| Load Snapshot | Load a previously created preset of the levels |
| Mute Cha.1 | Toggle Channel 1 to mute |
| Unmute Cha.1 | Toggle Channel 1 to unmute |
| Mute Cha.2 | Toggle Channel 2 to mute |
| Unmute Cha.2 | Toggle Channel 2 to unmute |
| Mute Cha.3 | Toggle Channel 3 to mute |
| Unmute Cha.3 | Toggle Channel 3 to unmute |
| Mute Cha.4 | Toggle Channel 4 to mute |
| Unmute Cha.4 | Toggle Channel 4 to unmute |
Task trigger
This device has no actions that can trigger a Task.
Digimap trigger
This device has no actions that can trigger a Digimap.
User interface
This device has no actions that can be launched from the UI Designer.
Device information
Check the manufacturer website for more information.
Need more help with this?
Don’t hesitate to contact us here.