Deltacast

This panel lists the available Deltacast live capture cards when they are properly installed on your system.
You can check that your cards are properly installed and in the correct order and type.
To ensure good performance, check that the value for PCIe and Field are green.

If you have any issue, please contact the support team.

Deltacast drivers

This panel is also where you can install or update the Deltacast drivers.

If you see a warning with “Driver/DLL mismatch”, you may need to update the Deltacast driver with the “Update driver” button.

To update the Deltacast driver, click on the Update driver button.

A Windows pop-up asking to allow a non-certified driver may appear on screen (make sure to check all screens if you are on a multiscreen setup!).

*Important: Please wait until the installation is completely finished before restarting or powering off the server.

Note that sometimes the driver installer also updates the firmware of the capture card, if you are updating multiple cards wait until all installations are finished before rebooting once.

!Warning: Always use the driver integrated in Modulo Player application.

NEVER install a driver directly from the Deltacast website.

Both the driver and application version need to match to work properly.

If you have any issue, please contact the support team.