Choose this device to connect to a 4x Relay Phidget REL1000_0
Controlling the power circuits of as many as four separate devices is a snap with this relay module.
Each mechanical relay can control a seperate circuit of up to 210W of DC power or 1750 VA of AC power.
This module requires an external power supply, which is isolated from the VINT port in order to improve stability by preventing ground loops.
The relays by nature also isolate the load circuit from the control circuit, meaning you don’t have to worry about voltage spikes in the load damaging your VINT Hub or computer.
Settings:
Name: User-friendly name
Serial Number: Enter the serial number of the VINT HUB Phidget
Port: Choose the port
Interval ms: Choose the refresh interval in milliseconds
Task action:
You can select some outputs and assign a voltage value.
Task trigger:
N/A
Digimap trigger:
N/A
User interface:
N/A
Device information:
Go to this page for more information.
You need to plug this device to a VINT HUB Phidget.
Need more help with this?
Don’t hesitate to contact us here.