Search
Related topics are listed below.
Video projectors calibration
Tutorials – English » Training tutorials » Live Event » Part 4 : Transfer on the Media Server » Video projectors calibration
We will now calibrate the 2 video projectors. Try in keystone mode and if necessary switch to curve mode
Autocalibration of 5 video-projectors on a dome
Tutorials – English » Training tutorials » Autocalibration of 5 video-projectors on a dome
Modulo Pi has an autocalibration solution fully integrated into its media servers. The autocalibration solution can be used when projecting on: - Flat surfaces - Curved surfaces - Dome surfaces In this exercice, we will see how to perform an automatic calibration…
Video
Useful Guidelines » Media Creation » Video
General This page will guide you through the best practice to ensure optimal quality when encoding video to playback on our servers. Supported codecs Our media servers can decode the following video codecs : MPEG-2 H.264 : See our guide to encode in H.264 HAP…
Video tutorials
Tutorials – English » Video tutorials
Discover a series of video tutorials to learn how to use Modulo Player’s main functionalities step by step. !If you use the Modulo Player Lite license on your notebook, some features won’t be available (hardware dependant). For example, it’s not…
Prepare the scene, projectors and camera
Tutorials – English » Training tutorials » Autocalibration of 5 video-projectors on a dome » Prepare the scene, projectors and camera
Scene setup Set the projectors and camera as follow: Video projectors need to cover the entire dome, and have enough overlap between each other to get a seamless projection The calibration camera needs to be as aligned as possible with the top-middle of the…
Architectural video mapping
Tutorials – English » Training tutorials » Architectural video mapping
In this exercise, you will: Use X-Maps to easily set up a show on a building Create an architectural mapping playlist Use copy/paste to save time Add a Modulo Player device to recall sequences Use a calendar device to trigger a task Material required: 1 x…
Architectural video mapping
Tutoriels – Français » Tutoriels de formation » Architectural video mapping
Dans cet exercice, nous allons : Utiliser les X-Maps pour facilement caler un show sur un bâtiment Créer une playlist type mapping architectural Utiliser le copier/coller pour gagner du temps Ajouter un device Modulo Player pour rappeler des…
Autocalibration de 5 video projecteurs sur un dome
Tutoriels – Français » Tutoriels de formation » Autocalibration de 5 video projecteurs sur un dome
Modulo Pi intégrère un système d’autocalibration dans ses media serveurs. Ce système d’autocalibration peut être utilisé sur des : - Surfaces planes - Surfaces incurvées - Domes Dans cette exercice, nous allons voir comment réaliser une…
Server setup
Tutorials – English » Training tutorials » Live Event » Part 1: Starting the project » Server setup
If you are working in demo mode on a laptop, we will use the second screen to display the monitoring, which we will configure to display all our outputs. If you have access to a real Modulo Player server, you can use its 4 outputs to fully simulate the live event.…
Barco
Modulo Player Remote » Devices tab » Projector » Barco
Select this device to control your Barco video-projectors. Barco supported: Very old Barco projector HDQ / HDX projectors PGWU series Use instead Barco UDX/F for current Barco video-projector generation. Settings: Name: User-friendly name IP: Enter the ip…
Multi-projector auto-calibration solution
Webinars – English » Multi-projector auto-calibration solution
Modulo Pi’s auto-calibration solution This webinar is dedicated to the multi-projector auto-calibration solution developed by Modulo Pi, and available as an option for the Modulo Player and Modulo Kinetic media servers. Chapters Feel free to use the chapters…
X-Map creation
Useful Guidelines » X-Map creation
In this topic, we will see how to create a Photoshop file in order to use it in the Modulo Player. To do this, we will start from an example of projection on a facade with 2 HD video projectors. Depending on the methodology used to create images, there are two options…
Solution d’auto-calibration de projecteurs
Webinaires – Français » Solution d’auto-calibration de projecteurs
Solution d’auto-calibration de Modulo Pi Ce webinaire est consacré à la solution d’auto-calibration de projecteurs développée par Modulo Pi, et disponible en option pour les médias serveurs Modulo Player et Modulo Kinetic. Chapitres Vous pouvez…
User Interface
Tutorials – English » Training tutorials » Live Event » Part 2: Multi playlists / User interface » User Interface
In Part 1 we used the Modulo Wing application which is handy to view all playlists or to recall Tasks. However the layout of the Playlists and Tasks is fixed and cannot be customized. We can create custom user interfaces in the UI Designer. You can find more…
Epson
Modulo Player Remote » Devices tab » Projector » Epson
Select this device to control Epson video projectors. *Note: Recent Epson projectors have received a firmware update that forces encrypted IP communication with the projector. To maintain control of the projector via the media server, the Command Communication…
Christie Digital
Modulo Player Remote » Devices tab » Projector » Christie Digital
Select this device to control your Christie Digital video-projectors with this device. Settings: Name: user friendly name. IP: enter the ip address of your video projector. Your device and Modulo Player need to be in the same subnet. Port: TCP/IP port. 3002 is the…
Retake the autocalibration on an existing installation
Tutorials – English » Training tutorials » Autocalibration of 5 video-projectors on a dome » Retake the autocalibration on an existing installation
If you have a system of projectors and servers in place, like in a permanent installation, you may want to retake the actual autocalibration. For instance, after a video projector is replaced, you simply need to operate the autocalibration with the same parameters you…
Optoma
Modulo Player Remote » Devices tab » Projector » Optoma
Select this device to control your Optoma video projectors. Settings Property Default Description Name Optoma User-friendly name. IP [empty] Enter the IP address of your device. Your device and Remote…
Optimize the calibration with the parameters
Tutorials – English » Training tutorials » Autocalibration of 5 video-projectors on a dome » Optimize the calibration with the parameters
After the calibration, we might observe that one or several projectors’ pictures are not perfectly adjusted with the others. First, check that there was no undesirable lights and nothing moving in front of the camera while you were performing the…
Part 4 : Transfer on the Media Server
Tutorials – English » Training tutorials » Live Event » Part 4 : Transfer on the Media Server
This final exercise will allow you to set the project up on the Media Server: Server configuration Transfer of the complete show Perform the calibration and blending of the two video projectors Setting up and using Live SDI and/or HDMI sources StreamDeck…
Architectural mapping
Application notes » Architectural mapping
Architectural mapping configuration Set-up relies on: 2 x Modulo Player Standard with 4 outputs Versatile display capabilities: Multi-projector soft edge blending Video mapping with 2D warping tools incl. X-Map function Powerful image & video playback Monitoring…
Préparer la scène, les projecteurs et la caméra
Tutoriels – Français » Tutoriels de formation » Autocalibration de 5 video projecteurs sur un dome » Préparer la scène, les projecteurs et la caméra
Préparer la scène Disposez les video projecteurs et la caméra comme suit : Les vidéo-projecteurs doivent projeter à eux tous sur tout le dôme et avoir suffisamment de recouvrement entre eux La caméra de calibration doit être placée au milieu de la base du…
Training tutorials
Tutorials – English » Training tutorials
Introduction The following tutorials guide you in discovering and efficiently using Modulo Player and are designed to develop the operator’s autonomy. As the tutorials unfold the instructions will become more generic and will go into less details on the…
Prepare Modulo Player for the calibration
Tutorials – English » Training tutorials » Autocalibration of 5 video-projectors on a dome » Prepare Modulo Player for the calibration
!Before continuing, take care that the software controlling the camera is closed, otherwise Modulo Player will not be able to communicate with the camera. In this chapter we will prepare Modulo Player for the calibration. Important License information *Info: The…
Sanyo
Modulo Player Remote » Devices tab » Projector » Sanyo
Choose this device to control your Sanyo video-projectors. Settings: Name: User-friendly name Serial/IP : Choose serial or IP IP: Enter the ip address of your video projector. Your device and Modulo Player need to be in the same subnet Port: TCP/IP port. 1000 is…
Barco UDX-F
Modulo Player Remote » Devices tab » Projector » Barco UDX-F
Select this device to control your Barco video-projectors UDX or F series. Settings: Name: User-friendly name IP: Enter the ip address of your video projector. Your device and Modulo Player need to be in the same subnet Port: TCP/IP port. 9090 is the default…
Soft edge blending, mapping, and live mixer
Application notes » Soft edge blending, mapping, and live mixer
Soft edge blending, projection mapping, and live mixer configuration Set-up relies on: 1 x Modulo Player Pro with 6 outputs Live capture cards (option): - 1 × 12G-SDI or 4 × 3G-SDI - 2 x HDMI 2.0 Versatile display capabilities: Multi-projector soft edge…
Multi-projector auto-calibration
Multi-projector auto-calibration
Description Achieve a perfectly warped and blended projection in minutes with Modulo Pi’s autocalibration solution. Available as an option for the Modulo Player and Modulo Kinetic series of media servers, the autocalibration feature is designed to automatically…
Projectiondesign
Modulo Player Remote » Devices tab » Projector » Projectiondesign
Choose this device to control your Projectiondesign video-projectors. Settings: Name: User-friendly name IP: Enter the ip address of your video projector. Your device and Modulo Player need to be in the same subnet Port: TCP/IP port. 1025 is the default value…
Barco RLM
Modulo Player Remote » Devices tab » Projector » Barco RLM
Select this device to control your Barco video-projectors RLM series. Use instead Barco UDX/F for current Barco video-projector generation. Settings: Name: User-friendly name IP: enter the ip address of your video projector. Your device and Modulo Player need…
Soft edge blending and live mixer
Application notes » Soft edge blending and live mixer
Soft edge blending and live mixer configuration Set-up relies on: 1 x Modulo Player Pro with 4 outputs Live capture cards (option): - 3 × 3G-SDI - 2 x HDMI 2.0 Versatile display capabilities: Multi-projector soft edge blending Powerful image & video…
Digital Projection
Modulo Player Remote » Devices tab » Projector » Digital Projection
Select this device to control your Titan Digital Projection projector. Settings: Name: User-friendly name IP: Enter the ip address of your video projector. Your device and Modulo Player need to be in the same subnet Port: TCP/IP port. 7000 is the default value…
Pjlink
Modulo Player Remote » Devices tab » Projector » Pjlink
This device allows you to control Panasonic video-projectors and many other brands that support this protocol. Settings: Name: User-friendly name IP: Enter the ip address of your video projector. Your device and Modulo Player need to be in the same subnet Port:…
Horizontal mode: Landscape
Useful Guidelines » X-Map creation » Horizontal mode: Landscape
Photo of the calibration pattern: Public point of view A photo should be taken from the public point of view. This photo must be adjusted to match the ratio and resolution of our projectors using Photoshop Crop tool. And possibly correct the paralaxes generated during…
Auto-calibration
Modulo Player Remote » Outputs tab » Auto-calibration
The objective of autocalibration is to easily obtain one seamless display with multiple video projectors as presented in the image below: Result of an autocalibration with 5 projectors on a dome. Autocalibration can be used with the following screen setups: flat,…
Adjusting the Pixel Workspace
Tutorials – English » Training tutorials » Live Event » Part 1: Starting the project » Adjusting the Pixel Workspace
Open the General tab and rename your show Live Event 1. If you are connected to a real Modulo Player server, you can check in the info area that the Windows desktop is correctly configured as an extended desktop with a full resolution of 7680×1080. Pixel…
Live Event
Tutorials – English » Training tutorials » Live Event
In this third exercise, we will learn how to setup a show typical of live events involving multiple projectors and screens. This show will simulate a corporate event announcing the launch of a new car. Here is a 3D preview of the final setup. It will involve the…
Vertical mode: Portrait
Useful Guidelines » X-Map creation » Vertical mode: Portrait
If you plan to use your projectors in a vertical position, simply create vertical shapes in Photoshop OUTPUT folder, taking care to keep your projector’s aspect ratio. All the recommendations seen previously remain the same. You can download the PSD file here…
Wizard
Modulo Player Remote » Outputs tab » Wizard
This Wizard allows you to quickly create outputs when you have a basic setup. Click on the Wizard button to open the dialog box. First adjust the pixel workspace in the general tab. Enter the following informations: • Width and height (Edid resolution) for each…
Software overview
Introduction » Software overview
Intuitive software Modulo Player works with a dedicated Modulo Player Remote, a control software designed to optimize setup, workflow management, and show control. No matter the number of media servers, one Modulo Player Remote is used to work on the server(s)…
Perform the autocalibration
Tutorials – English » Training tutorials » Autocalibration of 5 video-projectors on a dome » Perform the autocalibration
*Before moving forward, we remind you that all lights – natural or artificial – need to be turned off or hidden. Indeed, any reflection in the room can mar the autocalibration operation. On the Output page click on Autocalib. The autocalibration…
Multi-projector auto-calibration for a dome
Application notes » Multi-projector auto-calibration for a dome
Multi-projector auto-calibration in dome configuration Set-up relies on: 1 x Modulo Player Pro with 6 outputs 1 x dongle with Auto-Calibration option for 6 outputs 1 x PoE camera (not-included) Powerful Auto-Calibration module: Multi-projector automatic edge blending…
X-Map
Modulo Player Remote » Outputs tab » X-Map
For the most complex shapes, our exclusive X-Map function will help you save time and money. Most of the mappings on our Showcase gallery are done using this smart and user-friendly feature. When having different levels of depth on your projection surface or a…
Playlist creation – copy/paste
Tutorials – English » Training tutorials » XMap Shapes » Playlist creation – copy/paste
We will now add the following cues Use the copy/paste function to save time Then replace the video media and the sound file Now copy and paste again to create cue 4. Put the trigger of cue 4 in Follow 1 mode: it will automatically follow at the end of cue 3…
Device – add a Modulo Player device
Tutorials – English » Training tutorials » Architectural video mapping » Device – add a Modulo Player device
Let’s now add a Modulo Player device Now you can create a task Add the device Modulo Player as a subtask and choose the go cue action Use copy/paste to duplicate the previously created task twice Modify both new tasks to start sequence 2 and…
Création playlist – copier/coller
Tutoriels – Français » Tutoriels de formation » XMap Shapes » Création playlist – copier/coller
Nous allons maintenant ajouter de nouveaux cues en utilisant la fonction copier/coller pour gagner du temps. Nous allons ensuite remplacer les médias vidéo et le fichier son. On va ensuite refaire un copier/coller pour créer le cue 4. On met le trigger du…
Device – ajout d’un device Modulo Player
Tutoriels – Français » Tutoriels de formation » Architectural video mapping » Device – ajout d’un device Modulo Player
On va maintenant ajouter un device Modulo Player. On peut ensuite créer une task. On ajoute en subtask le device Modulo Player et on choisit l’action go cue. On utilise le copier/coller de task pour dupliquer 2 fois la task créée précédemment. On…
Live mixer – sources creation
Tutorials – English » Training tutorials » XMap Shapes » Live mixer – sources creation
Now let’s add live sources in the Modulo Player: depending on the sources and frame grabber available, they may be SDI or HDMI sources or more simply Streamlined sources in NDI. Open the Mixer application, connect to the server by entering its IP address First,…
Live Mixer – création sources
Tutoriels – Français » Tutoriels de formation » XMap Shapes » Live Mixer – création sources
Nous allons d’abord ajouter des sources live dans Modulo Player : en fonction des sources et des cartes d’acquisition disponibles, il pourra s’agir de sources SDI ou HDMI, ou plus simplement de sources streamées en NDI. On ouvre l’application…
Live Mixer – ajout source au Preview et Take
Tutoriels – Français » Tutoriels de formation » XMap Shapes » Live Mixer – ajout source au Preview et Take
Nous allons maintenant ajouter deux sources dans la destination SCREEN. Puis une source dans la destination des formes On peut maintenant appuyer sur Take pour envoyer en fondu ce qui est au Preview vers le Program.
Live mixer – add source to preview and take
Tutorials – English » Training tutorials » XMap Shapes » Live mixer – add source to preview and take
Now add two sources in the SCREEN destination Then a source in the Logo destination and in the Round destination You can now press Take to send what is in the preview to the program with a fade.
Playlist creation
Tutorials – English » Training tutorials » Architectural video mapping » Playlist creation
Now let’s create the show’s playlist Add 2 more cues Leave cue 3 empty, add the castle-1-UV media and the associated sound file in cue 4 Put a Fade In time of 2 seconds on this cue. Now add a Fade Out to cue 4: Add an empty cue 5 called FADE OUT Add a…
X-Maps – warping
Tutorials – English » Training tutorials » XMap Shapes » X-Maps – warping
Display a test pattern on the background screen Then warp the Modulo PI logo: Since the PSD file has all the elements one after the other, we must bring the shape back into the screen. Display a red pattern to see the element. Select all the control points with…
Project creation
Tutorials – English » Training tutorials » Architectural video mapping » Project creation
Create a new project folder and start the Modulo Player application. Copy the PSD file on the server, at the root of the project folder. Copy the media folder and place the two media test patterns for the calibration in it Then create a new Show …
Création playlist
Tutoriels – Français » Tutoriels de formation » Architectural video mapping » Création playlist
Nous allons ensuite créer la playlist de show. On ajoute 2 autres cues. On laisse le cue 3 vide, et on ajoute le média castle-1-UV ainsi que le fichier son associé dans le cue 4. On met un temps de Fade In de 2 secondes sur ce cue. On va ajouter un Fade Out au…
Création du projet
Tutoriels – Français » Tutoriels de formation » XMap Shapes » Création du projet
Nous allons créer un nouveau dossier de projet, et démarrer ensuite l’application Modulo Player. Nous allons copier le fichier PSD dans le serveur à la racine du dossier de projet. Nous créons ensuite un nouveau show. Import du fichier PSD : On…
Project creation
Tutorials – English » Training tutorials » XMap Shapes » Project creation
Create a new project folder and then start the Modulo Player application. Then copy the PSD file to the server at the root of the project folder. Next, create a new Show Then import the PSD file: Select the PSD file and uncheck the “filter…
Calage des X-Maps
Tutoriels – Français » Tutoriels de formation » XMap Shapes » Calage des X-Maps
Nous allons maintenant afficher une test pattern sur l’écran de fond. Nous allons ensuite caler le logo Modulo Pi : Puisque le fichier PSD inclut tous les éléments les un à la suite des autres, on doit donc ramener la forme dans l’écran. On…
Création du projet
Tutoriels – Français » Tutoriels de formation » Architectural video mapping » Création du projet
Nous allons créer un nouveau dossier de projet, puis démarrer l’application Modulo Player. Nous allons ensuite copier le fichier PSD dans le serveur à la racine du dossier de projet. Nous copions ensuite le dossier média, et ajoutons dans ce dossier les…
X-Maps warping
Tutorials – English » Training tutorials » Architectural video mapping » X-Maps warping
First, import the Photoshop PSD file. Then go to the Media tab and click on the “refresh” button to load the media previously copied into the show. Then, go to the Playlist tab. Add cues, leave the cue 1 empty. Load the test Pattern into cue 2 You can…
Playlist creation – first cue
Tutorials – English » Training tutorials » XMap Shapes » Playlist creation – first cue
We will now copy the media to the server First create a new folder Then select the medias folders and copy them into the created folder Then go to the Media tab and click on the “Refresh” button to display the new media in the show Then go to the…
Réglage cue avancé
Tutoriels – Français » Tutoriels de formation » Live Event » Live event – Multi-playlists / User interface » Réglage cue avancé
Nous allons maintenant copier/coller sur le cue 2 de la playlist 2 vers le cue 2 de la playlist 3. On va ensuite remplacer le média par un autre média sur le cue 2 de la playlist 3. Il est possible d’appliquer des réglages colorimétriques différents sur…
Setup of EDID and Eyefinity
Tutorials – English » Training tutorials » Live Event » Part 4 : Transfer on the Media Server » Setup of EDID and Eyefinity
Let’s force the 4 outputs with an EDID and do eyefinity to have an desktop extended over 4 screens. Check that the outputs are correctly configured in the output tab (if you have done the initial setup on a single screen, the resolution of the outputs has been…
Création playlist – premier cue
Tutoriels – Français » Tutoriels de formation » XMap Shapes » Création playlist – premier cue
Nous allons maintenant copier les médias sur le serveur. On va d’abord créer un nouveau dossier. Nous sélectionnons ensuite les dossiers contenant le medias pour le copier dans le dossier créé. Nous allons ensuite dans l’onglet Media et on clique…
Calage de X-Maps
Tutoriels – Français » Tutoriels de formation » Architectural video mapping » Calage de X-Maps
On va d’abord importer le fichier Photoshop PSD. On va ensuite dans l’onglet Media et on clique sur le bouton “Refresh” pour charger les médias préalablement copiés dans le show. On va enfin dans l’onglet Playlist. On ajoute des cues,…
Création de presets
Tutoriels – Français » Tutoriels de formation » Live Event » Live event – Mixer » Création de presets
La création et le rappel de presets
Presets creation
Tutorials – English » Training tutorials » Live Event » Part 3: Mixer » Presets creation
Creation and recall of presets
Paramétrage EDID et Eyefinity
Tutoriels – Français » Tutoriels de formation » Live Event » Portage du projet sur le média serveur » Paramétrage EDID et Eyefinity
On va maintenant forcer les 4 sorties avec une EDID et on fait le Eyefinity pour avoir un bureau étendu sur 4 écrans. On vérifie que les outputs sont correctement configurées dans l’onglet Output. Si on a fait le setup initial sur un seul écran, la…
Device – ajout d’un device Calendar
Tutoriels – Français » Tutoriels de formation » Architectural video mapping » Device – ajout d’un device Calendar
Nous allons maintenant ajouter un device Calendar. On va ensuite utiliser ce device Calendar comme trigger pour déclencher la première task.
Device – add a Calendar device
Tutorials – English » Training tutorials » Architectural video mapping » Device – add a Calendar device
Now add a Calendar device Then use this Calendar device as a trigger to trigger the launch of the first task
Live Mixer – création destinations
Tutoriels – Français » Tutoriels de formation » XMap Shapes » Live Mixer – création destinations
Nous allons ensuite créer deux destinations : une pour l’écran de fond et une pour les formes. Créons d’abord celle pour l’écran de fond : Puis celle pour les formes :
Project creation
Tutorials – English » Training tutorials » Live Event » Part 1: Starting the project » Project creation
Open the Control tab and open the Settings panel to create a new project folder. Name it Car Show. Start the Modulo Player application and transfer the media to the server.
Création du projet
Tutoriels – Français » Tutoriels de formation » Live Event » Live event : Lancement du projet » Création du projet
Ouvrez l’onglet Control et ouvrez le panel Settings pour créer un nouveau projet. Nommez le Car Show. Démarrez l’application Modulo Player et transférez les médias vers le serveur.
Live mixer – destinations creation
Tutorials – English » Training tutorials » XMap Shapes » Live mixer – destinations creation
Now, let’s create three destinations: one for the background screen, one for the Modulo PI logo and one for the ROUND shape. Let’s first create the one for the background screen Then the one for the shapes
Création de playlists
Tutoriels – Français » Tutoriels de formation » Live Event » Live event – Multi-playlists / User interface » Création de playlists
La création et l’utilisation de plusieurs playlists Nous allons maintenant ajouter plusieurs playlists afin de pouvoir lancer du contenu différent de manière indépendante. On clique sur le bouton + et on ajoute 4 playlists. Nous allons maintenant renommer…
Playlists creation
Tutorials – English » Training tutorials » Live Event » Part 2: Multi playlists / User interface » Playlists creation
We will now add several playlists in order to be able to launch different content in independent ways. Add 4 playlists and name them accordingly: SHOW POWERPOINT LIVE SPEAKER *Tip: Hold down Right click on a playlist tab to open the Edit menu for the name of…
Playlist
Tutorials – English » Training tutorials » Live Event » Part 1: Starting the project » Playlist
We will now create a Playlist. In the Playlist tab, create several cues. Leave Cue 1 empty as usual. On Cue 2, add the 3 test patterns on layers 1,2 and 3. Position them in the pixel space at their correct positions. Add a Fade in and Fade out time of 2 seconds…
Cue advanced settings
Tutorials – English » Training tutorials » Live Event » Part 2: Multi playlists / User interface » Cue advanced settings
Use the cue copy/paste function to copy Cue 2 of Playlist 2 into Cue 2 of Playlist 3 Replace the media on Cue 2 of Playlist 3 by SPEAKER 1 Activate the Color option in the Advanced tab and apply different colorimetric settings for these two layers. Drop…
Playlist
Tutoriels – Français » Tutoriels de formation » Live Event » Live event : Lancement du projet » Playlist
Nous allons maintenant créer une playlist. Dans l’onglet Playlist, créez plusieurs cues. Laissez le Cue 1 vide, pour l’état neutre. Sur le Cue 2, ajoutez les 3 test patterns sur les layers 1, 2 et 3. Positionnez les correctement dans l’espace…
Project creation
Tutorials – English » Training tutorials » Start project » Project creation
Modulo Player Remote is organized in tabs which you can access from the top of the interface. They are ordered in such a way to be browsed and configured one after the other throughout the usual workflow for setting up a project. You can find more details for each tab…
Création du projet
Tutoriels – Français » Tutoriels de formation » Start project » Création du projet
Modulo Player Remote est organisé en onglets que vous pouvez accéder depuis le haut de l’interface. Ils sont organisés de telle manière à être parcourus un par un et dans l’ordre au cours du workflow typique du montage d’un projet. Vous pouvez…
Add cues
Tutorials – English » Training tutorials » Start project » Add cues
Add the Jingle 1.mp4 media on cue 3 and add the Jingle 1.wav media on the audio track. Set the Media mode to Last frame so the media will only play once. Add a fade in of 2 seconds. Now add the Jingle 1 – Loop.mp4 on cue 4 in loop mode and with a fade in…
Stream Deck
Tutorials – English » Training tutorials » Live Event » Part 3: Mixer » Stream Deck
Setting up and using Stream Deck by Elgato
Stream Deck
Tutoriels – Français » Tutoriels de formation » Live Event » Live event – Mixer » Stream Deck
Le paramétrage et l’utilisation du Stream Deck
Création des sources live
Tutoriels – Français » Tutoriels de formation » Live Event » Portage du projet sur le média serveur » Création des sources live
Nous allons maintenant ajouter les médias live Deltacast dans le show.
Live sources creation
Tutorials – English » Training tutorials » Live Event » Part 4 : Transfer on the Media Server » Live sources creation
Now let’s add Live Deltacast media to the show.
Background source creation
Tutorials – English » Training tutorials » Live Event » Part 3: Mixer » Background source creation
Now let’s use a zone of the pixel workspace as a Live source
DisplayPort Adapter
Hardware » DisplayPort Adapter
DP to DVI or HDMI : You need to use active adapters to convert from DisplayPort to another format (for example HDMI or DVI). To avoid tearing in the video ouputs, please make sure you only use one type of adapters per server (the exact same type of adapter for every…
Ajout de cues
Tutoriels – Français » Tutoriels de formation » Start project » Ajout de cues
Ajoutez le média Jingle 1.mp4 sur le cue 3 et ajoutez le média Jingle 1.wav sur la track audio. Réglez le Media mode sur Last frame pour que le média ne soit lu qu’une fois. Ajoutez un fade in de 2 secondes. Ajoutez maintenant le media Jingle 1 –…
Création de source background
Tutoriels – Français » Tutoriels de formation » Live Event » Live event – Mixer » Création de source background
Nous allons maintenant utiliser une zone de l’espace pixellaire en tant que source live.
Intro to Modulo Player and Modulo Kinetic
Webinars – English » Intro to Modulo Player and Modulo Kinetic
An introduction to Modulo Player and Modulo Kinetic: This webinar offers an introduction to our media servers: Modulo Player and Modulo Kinetic. To easily navigate through the video, see the menu below: 0:00 – Introduction 1:50 – Modulo Pi in…
Calage des vidéo-projecteurs
Tutoriels – Français » Tutoriels de formation » Live Event » Portage du projet sur le média serveur » Calage des vidéo-projecteurs
Nous allons maintenant caler les 2 projecteurs. On essaie en mode Keystone et si nécessaire, on passe en mode Curve.
Live mixer – layouts creation
Tutorials – English » Training tutorials » XMap Shapes » Live mixer – layouts creation
Split the layout preview and program into 2 zones, one per destination Then drag&drop each destination in its respective area
Monitoring
Tutoriels – Français » Tutoriels de formation » Live Event » Live event – Multi-playlists / User interface » Monitoring
L’utilisation du Monitoring pour visualiser les sources lives Nous allons modifier notre preset de monitoring pour visualiser sur le même monitoring les sources NDI. On ajoute une ligne et on la divise en 4 colonnes. On drag & drop les 4 sources NDI dans les…
Monitoring
Tutorials – English » Training tutorials » Live Event » Part 2: Multi playlists / User interface » Monitoring
We will configure our monitoring preset to preview our live NDI sources. In the Monitoring tab, add another line and divide it into four columns. Drag&drop the 4 NDI sources into the empty slots. !Warning: With a Modulo Player Lite license, only one output can be…
1st show creation
Tutorials – English » Video tutorials » 1st show creation
First show creation: Download the tutorial pack here
Working with playlists
Tutorials – English » Video tutorials » Working with playlists
Working with playlists: Download the tutorial pack here
Live Mixer (Part 1)
Tutorials – English » Video tutorials » Live Mixer (Part 1)
Live Mixer: Download the tutorial pack here
UI Designer
Tutorials – English » Video tutorials » UI Designer
UI Designer: Download the tutorial pack here
Repatching of sources in the Live Mixer
Tutorials – English » Training tutorials » Live Event » Part 4 : Transfer on the Media Server » Repatching of sources in the Live Mixer
Repatch live sources in the mixer to point to Deltacast live sources instead of NDI We can now launch the show.