Visca PTZ

Choose this device when you want to control a PTZ using the VISCA protocol.

Settings:

Name: User-friendly name
Serial / IP: Choose mode

Settings for serial mode:
Port: Choose the serial number port
Baudrate: Choose the matching baudrate

Settings for IP mode:
IP: Enter the ip address of your device. Your device and Modulo Player need to be in the same subnet
Port: Enter the TCP/IP port
ID: ID of the camera

- Enable DMX control Off /On : You can enable DMX control using Art-Net
- DMX: Choose the corresponding device to send DMX data
- Start Channel: Assign a start channel by entering the channel number

Task action:

Power On/Off
Go Home
Reset
Save Preset (Index)
Recall Preset (index)
Stop Pan Tilt
Pan Tilt Home
Move Left Slow /Medium /Fast
Move Left Speed (value)
Move Right Slow /Medium /Fast
Move Right Speed (value)
Move Up Slow /Medium /Fast
Move Up Speed (value)
Move Down Slow /Medium /Fast
Move Down Speed (value)
Move Zoom Tele Slow /Medium /Fast
Move Zoom Tele Speed (value)
Move Zoom Wide Slow /Medium /Fast
Move Zoom Wide Speed (value)
Stop Zoom
Zoom Home
Move Focus Tele Slow /Medium /Fast
Move Focus Tele Speed (value)
Stop Focus
Tally On/Off
WB Auto 1
WB Auto 2
WB indoor/Outdoor
Exposure Auto/Manua
Exposure Shutter Priority
Exposure Iris Priority
Exposure Gain Priority
Shutter
Iris
Gain
Exposure Compensation
Zoom
Focus
Move to Position

Task trigger:

N/A

Digimap trigger:

N/A

User interface:

You can drag & drop this device in the user interface.

Device information:

N/A