Setup of FLIR-PtGrey camera for auto-calibration

1. Install the camera driver: SpinnakerSDK_FULL_1.20.0.15_x64.exe

2. Start “SpinView” program (from Start menu)
3. In a case the camera has a network configuration problem, right-click on the camera name and click on “Force IP to resolve”

4. Double-click on the corresponding camera in the “Camera list” and make sure that the image acquisition is OK

Save IP configuration

By default, PtGrey cameras reset their IP to the factory value on each power-up. However, il you want the camera to save the IP address:

Need more help with this?
Don’t hesitate to contact us here.

Thanks for your feedback.