This device is an internal chronometer.
You can use to trigger a task or display a Chronometer in the User Interface.
Settings:
| Name | User-friendly name |
|---|---|
| Enable | Activate to enable the device |
| Run at startup | Activate to run the device at Kinetic startup |
| Autostart On/Off | If activated, the chronometer will start at the startup of the Modulo Player application |
Task action:
| Enable device | enable Chronometer device |
|---|---|
| Disable device | disable Chronometer device |
| locate | locate timecode at a specific time |
| play Timecode | play timecode at a specific time |
| pause | pause timecode |
| play | playtimecode |
Task trigger:
You can trigger tasks if you pass a specific value of the chronometer.
For instance, you can use this device to shut down an installation after x hours of playback.
Digimap trigger:
You can use the chronometer time value (in ms) as a Digimap input.
User interface:
You can use this device in the user interface.
Device information:
N/A
Need more help with this?
Don’t hesitate to contact us here.