Barco RLM

Select this device to control your Barco video-projectors RLM series.

Use instead Barco UDX/F for current Barco video-projector generation.

Settings:

Name: User-friendly name
IP: enter the ip address of your video projector. Your device and Modulo Player need to be in the same subnet
ID: optional ID (herited from old RS232 protocol).
Port: TCP/IP port. 43680 is the default value (usually doesn’t have to be changed)

Task action:

Command available:

Power On/Off
Lamp On/Off
Lamp Mode: Economy/ Standard/ Dimming
Shutter On/Off
Channel (value)
Test Pattern (list)
OSD On/Off
Projection Front/ Rear/ Floor/ Ceiling
Set Lamp Power (value)
Load Lens Memory (value)
Save Lens Memory (value)
Set Lamps Count (value)
Focus Increase/Decrease
Zoom Increase/Decrease
Horizontal Shift Increase/Decrease
Vertical Shift Increase/Decrease

Task Trigger:

N/A

Digimap Trigger:

N/A

User Interface:

You can add this device in any user panel. You can then choose the available features in the panel.

Device Information:

Go to Barco website for more information.