Choose this device to connect to a Phidgets Sound sensor SND1000_0
Measure sound from 34 to 102 dB (SPL).
Supports A and C weightings, and can split data into distinct frequency bands.


Name: User-friendly name
Serial Number: Enter the serial number of the VINT HUB Phidget
Port: Choose the port
Interval ms: Choose the refresh interval in milliseconds

Task action:


Task trigger:


Digimap trigger:

Use the Db or DbA or DbC, or specific frequency bands:
The following frequency bands are represented:
octaves 0 = 31.5 Hz
octaves 1 = 63 Hz
octaves 2 = 125 Hz
octaves 3 = 250 Hz
octaves 4 = 500 Hz
octaves 5 = 1 kHz
octaves 6 = 2 kHz
octaves 7 = 4 kHz
octaves 8 = 8 kHz
octaves 9 = 16 kHz

User interface:

You can add this device in any user panel.
You can then choose the available features in the panel.

Device information:

Go to this page for more information.
You need to plug this device to a VINT HUB Phidget.

Need more help with this?
Don’t hesitate to contact us here.

Thanks for your feedback.