Choose this device to control Barco PDS series.
Settings:
| Name | User-friendly name |
|---|---|
| Enable | Activate to enable the device |
| Run at startup | Activate to run the device at Kinetic startup |
| IP | Enter the ip address of your device. Your device and Kinetic Designer need to be in the same subnet |
| Port | Choose port number. Port. 3000 is the default value (usually doesn’t have to be changed) |
Task action:
| Enable device | enable the device |
|---|---|
| Disable device | disable the device |
| Take | send take command |
| Set transition time | set transition time in seconds |
| Select Input | select input index |
| Go Program Black On | enable black on program |
| Go Program Black Off | disable black on program |
| Freeze On | enable freeze |
| Freeze Off | disable freeze |
| Set Output RasterBox Program On | enable rasterbox on program |
| Set Output RasterBox Program Off | disable rasterbox on program |
| Set Output RasterBox Pvw On | enable rasterbox on preview |
| Set Output RasterBox Pvw Off | disable rasterbox on preview |
Task trigger:
N/A
Digimap trigger:
N/A
Graph:
N/A
User interface:
N/A
Device information:
Go to the manufacturer website for more information.
Need more help with this?
Don’t hesitate to contact us here.