Choose this device to control your Epson video-projectors.


Name User-friendly name
Enable Activate to enable the device
Run at startup Activate to run the device at Kinetic startup
IP Enter the ip address of your video projector. Your device and Kinetic Designer need to be in the same subnet
Port: Choose port number. Port. 3002 is the default value (usually doesn’t have to be changed
ID select projector ID

Task action:

Enable device enable the device
Disable device disable the device
Power On send Epson power on command
Power Off send Epson power off command
Shutter On send Epson shutter on command
Shutter Off send Epson shutter off command
Freeze On send Epson freeze on command
Focus Min set to min focus value
Focus Max set to max focus value
Focus Decrement decrease focus value
Focus Increment increase focus value
Focus Off disable focus control
Zoom Min set to min zoom value
Zoom Max set to max zoom value
Zoom Decrement decrease zoom value
Zoom Increment increase zoom value
Zoom Off disable zoom control
ShiftHorizontal Min set to min horizontal shift value
ShiftHorizontal Max set to max horizontal shift value
ShiftHorizontal Decrement decrease horizontal shift value
ShiftHorizontal Increment increase horizontal shift value
ShiftHorizontal Off disable horizontal shift control
ShiftHorizontal Init initialize horizontal shift control
ShiftVertical Min set to min vertical shift value
ShiftVertical Max set to max vertical shift value
ShiftVertical Decrement decrease vertical shift value
ShiftVertical Increment increase vertical shift value
ShiftVertical Off disable vertical shift control
ShiftVertical Init initialize vertical shift control
OSD On send Epson OSD on command
OSD Off send Epson OSD off command
Recall Lens Position recall lens position value
Save Lens Position save lens position value
Delete Lens Position delete lens position value
Recall Memory recall memory value
Save Memory save memory value
Delete Memory delete memory value

Task trigger:


Digimap trigger:




User interface:

You can add this device in any user panel. You can then choose the available features in the panel.

Device information:

Go to the manufacturer website for more information.

Need more help with this?
Don’t hesitate to contact us here.

Thanks for your feedback.