Choose this device to connect to a Phidgets Touch Wheel HIN1000_0
Need a user-friendly control panel for your Phidgets project?
Look no further than the Touch Wheel Phidget. This user interface board uses capacitive touch technology, similar to the touchscreen on a smartphone.
Capacitive touch sensors such as this can detect a touch through a piece of glass or plastic of up to 3mm thick, so you can hide this board inside an enclosure or behind a panel.


Name User-friendly name
Enable Activate to enable the device
Run at startup Activate to run the device at Kinetic startup
Serial Number: Enter the serial number of the VINT HUB Phidget
Port: Choose port number of the VINT HUB Phidget
Data interval ms: Choose the refresh interval in milliseconds

Task action:


Task trigger:

Choose to trigger on pressed or released and choose on which button.

Digimap trigger:



State and value get the state of all keys and the wheel value

User interface:


Device information:

Go to this page for more information.
You need to plug this device to a VINT HUB Phidget.

Need more help with this?
Don’t hesitate to contact us here.

Thanks for your feedback.