Create: VNode, Render Surface, Output

Creation of a VNode and Render Surface

• First add a VNode
• Create a Render Surface about 1920×1080 (which is the default value)
• Assign the Render Surface to the V-Node

*We recommand to rename and color each VNode and Render Surface in order to have a proper setup.

Output creation

• Add an Output about 1920×1080 to the VNode (which is the default value)
  By default the extracted map area should be good : top,left: 0,0 and size: 1920×1080 and the out area: top,left: 0,0 and size: 1920×1080.
• Go to the shape subtab and display a test pattern grid.

Activate the demo Output

• Be sure your projector is connected and set to the good input
• Check that your laptop is correctly set to Extend these displays (not the Duplicate mode)
• On Kinetic Designer, right click on the Output you just created and Display on side screen

*The flash colors you experience on the output is normal and due to the Demo mode.

!If you are using a real V-Node machine : remember that adding a V-Node, a Render Surface, an Output, or adding Medias could need to operate a Online on the V-Node(s) concerned.