Select this device to control your Barco video-projectors UDX or F series.


Name User-friendly name
Enable Activate to enable the device
Run at startup Activate to run the device at Kinetic startup
Type choose the Barco projector’s type
IP Enter the ip address of your video projector. Your device and Kinetic Designer need to be in the same subnet
Port: Choose port number. Port. 43680 is the default value (usually doesn’t have to be changed
ID select projector ID

Task action:

Enable device enable the device
Disable device disable the device
Power On send Barco power on command
Power Off send Barco power off command
Lamp On send Barco lamp on command
Lamp Off send Barco lamp off command
Shutter On send Barco shutter on command
Shutter Off send Barco shutter off command
Mute On send Barco mute on command
Mute Off send Barco mute off command
Channel select channel number
Freeze On send Barco freeze on command
Freeze Off send Barco freeze off command
Focus increase increase focus value
Focus decrease decrease focus value
Zoom increase increase zoom value
Zoom decrease decrease zoom value
Shift Horizontal increase increase horizontal shift value
Shift Horizontal decrease decrease horizontal shift value
Shift Vertical increase increase vertical shift value
Shift Vertical decrease decrease vertical shift value
Laser Power Eco Mode (PGWU) select Laser Power Eco Mode (only for PGWU)
Laser Power Normal (PGWU) select Laser Power normal Mode (only for PGWU)
Laser Power Power (PGWU) select Laser Power power Mode (only for PGWU)
Laser Power Value (PGWU) select Laser Power value Mode (only for PGWU)
Aspect Ratio (G60) choose aspect ratio from the list (only for G60)
Color Temp (G60) choose color temperature from the list (only for G60)
Display Mode (G60) choose display mode from the list (only for G60)
Standby Power Mode(G60) choose standby power mode from the list (only for G60)
Test Pattern (G60) choose test pattern from the list (only for G60)
Light Source (G60) choose light source from the list (only for G60)
Constant Power (G60) choose constant power value from the list (only for G60)

Task trigger:


Digimap trigger:




User interface:

You can add this device in any user panel. You can then choose the available features in the panel.

Device information:

Go to Barco website for more information.

Need more help with this?
Don’t hesitate to contact us here.

Thanks for your feedback.