Choose this device to connect to a Phidgets Dial HIN1101_0 You can then precisely measure the position of the dial use it with a Digimap.


Name User-friendly name
Enable Activate to enable the device
Run at startup Activate to run the device at Kinetic startup
Serial Number: Enter the serial number of the VINT HUB Phidget
Port: Choose port number of the VINT HUB Phidget
Data Interval ms: Choose the refresh interval in milliseconds

Task action:


Task trigger:

You can trigger a task when you press the internal button of the dial.
Select “Button ON” if you want to trigger the task on press, or select “Button OFF” if you want to trigger the task on release.

Digimap trigger:

You will receive the encoder dial position as input.

User interface:

You can add this device in any user panel.
You can then display the dial value.

Device information:

Go to this page for more information.
You need to plug this device to a VINT HUB Phidget.

Need more help with this?
Don’t hesitate to contact us here.

Thanks for your feedback.