Choose this device to control a device on a serial port. Optionally, you will need a USB to RS232 converter to connect.
|Enable||Activate to enable the device|
|Run at startup||Activate to run the device at Kinetic startup|
|Port||Select the serial port. Go to the device manager to find the good one|
|Baudrate||Select a value from the dropped down list|
|Data Bits||Select a value from the dropped down list|
|Parity||Select option from the dropped down list|
|Stop Bits||Select option from the droped down list|
|Enable device||enable the device|
|Disable device||disable the device|
|Send Command||you have to enter the ASCII character string you want to send *|
You can trigger a task sending an ASCII string terminated with a line feed ( ‘\n’ or 0×0A in hexadecimal format).
You need to enter the same ASCII command without the line feed in the message field.
|Receive value||receive value from serial device|
|Send message||send message on serial device|
To test your device you can use this free tools.
Need more help with this?
Don’t hesitate to contact us here.