Search
Related topics are listed below.
Modulo Pi key activation
Starter guide » Modulo Kinetic Designer 2D and Modulo Kinetic Designer 2D+3D » Modulo Pi key activation
Plug your Modulo Pi key on your computer: Go to the email with activation links: Repeat the following process for each link to activate all licenses. !In case you purchased a license several times for separate keys, make sure to activate a given license on a…
Modulo Pi Learning Kit
Starter guide » Modulo Pi Learning Kit
The Modulo Pi Learning kit is available on our eShop. The kit was designed to help you discover and practice Modulo Player and Modulo Kinetic. A full series of tutorials is based on this kit and will show you how to use our media server solutions. Thanks to the…
Modulo Player
Kinetic Designer: User Interface » All Views » Devices » Modulo Pi Devices » Modulo Player
Choose this device to control an external Modulo Player. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup IP Enter the ip…
Modulo Shortcut
Kinetic Designer: User Interface » All Views » Devices » Modulo Pi Devices » Modulo Shortcut
Choose this device to control a Modulo Shortcut and take control to your Power Point presentations. You can download Modulo Shortcut for Windows here You can download Modulo Shortcut for Mac here Settings: Name User-friendly name Enable …
Modulo Shortcut
Companion Apps » Modulo Shortcut
Modulo Shortcut: Use this free application to easily take control of your Keynote or PowerPoint presentations using common shortcuts. Download: For Windows PowerPoint: Connect to the Customer Area > Modulo Kinetic > Companion Apps section Then install Modulo…
Modulo Kinetic
WebSocket external control protocol » Modulo Kinetic
Doaction.kinetic: Use this command to do an action on a Modulo Kinetic Designer. You can use the param backup to trigger a show backup. You can use the param save to trigger a show save. You can use the param online to trigger an online on all V-Nodes. You can use…
Intro to Modulo Player and Modulo Kinetic
Webinars – English » Intro to Modulo Player and Modulo Kinetic
An introduction to Modulo Player and Modulo Kinetic: This webinar offers an introduction to our media servers: Modulo Player and Modulo Kinetic. To easily navigate through the video, see the menu below: 0:00 – Introduction 1:50 – Modulo Pi in…
Modulo Kinetic media server
Starter guide » Modulo Kinetic media server
You are starting to use our Modulo Kinetic media server. On the next pages, you will be guided through some steps to set up your Modulo Kinetic media server.
Modulo Kinetic Designer installation
Starter guide » Modulo Kinetic Designer 2D and Modulo Kinetic Designer 2D+3D » Modulo Kinetic Designer installation
Customer Area: Go to the customer portal to create an account and donwload the software. Create an account: Login to your account or create a new account if you don’t have one. Go to the Modulo Kinetic page: Download Modulo Kinetic…
Introduction à Modulo Kinetic
Webinaires – Français » Introduction à Modulo Kinetic
Modulo Kinetic, introduction A travers ce webinaire, découvrez les principales fonctionnalités de Modulo Kinetic. Pour naviguer plus facilement dans cette vidéo, retrouvez le sommaire minuté : 0:00 – Introduction 1:50 – Overview Modulo Kinetic 8:36…
Modulo Kinetic Designer 2D and Modulo Kinetic Designer 2D+3D
Starter guide » Modulo Kinetic Designer 2D and Modulo Kinetic Designer 2D+3D
Modulo Kinetic Designer 2D is the license available on Modulo Pi’s eShop. This license allows you to practice the software (2D environment), self-train, and pre-program your projects offline. Modulo Kinetic Designer 2D+3D is a monthly license that allows you to…
Start of Modulo Kinetic Designer
Starter guide » Modulo Kinetic media server » Start of Modulo Kinetic Designer
You can now launch the Modulo Kinetic Designer application on your PC. Then, follow the Start Project tutorial available in English and French. You should now see your Modulo Kinetic VNode when you launch the Modulo Kinetic Designer, and go to the menu V-Nodes and…
Presentation + demo of Modulo Kinetic
Webinars – English » Presentation + demo of Modulo Kinetic
Presentation + demo of Modulo Kinetic: This webinar offers a presentation of Modulo Kinetic, our fully-integrated media server solution. To easily navigate through the video, see the menu below: 0:00 – Introduction 1:35 – Modulo Pi in brief 2:54…
Controle du Modulo Player en Art-Net
Tutorials – English » Training tutorials » Workshop » Controle du Modulo Player en Art-Net
On peut contrôler facilement le Modulo Player en utilisant le protocole Art-Net pour recevoir par exemple des commandes venant d’une console lumière. On peut être contrôler de 3 manières: trigger DMX déclenchant une task, patch d’une valeur DMX vers…
Modulo Kinetic et les événements virtuels XR
Webinaires – Français » Modulo Kinetic et les événements virtuels XR
Modulo Kinetic et les événements virtuels XR Notre média serveur Modulo Kinetic s’enrichit de nouvelles fonctionnalités dédiées aux événements virtuels avec de la Réalité Augmentée, de la Réalité Etendue, et de l’extension de décor. Dans ce…
Modulo Kinetic for virtual events and XR
Webinars – English » Modulo Kinetic for virtual events and XR
Modulo Kinetic for virtual events and XR Our Modulo Kinetic media server now includes new features dedicated to virtual events including AR, XR and scenic extension. In this webinar, have a quick overview and introduction to the new capabilities of Modulo Kinetic V4…
Basic setup and start of Modulo Kinetic Designer
Starter guide » Modulo Kinetic Designer 2D and Modulo Kinetic Designer 2D+3D » Basic setup and start of Modulo Kinetic Designer
Your Modulo Pi key is activated, your Modulo Kinetic Designer is installed. Now, it’s time to play! Firewall and antivirus: First, check that your antivirus will not prevent the applications to launch or to communicate. Usually, an exception is added…
Application notes
Application notes
Modulo Kinetic is a fully-integrated media server solution which can be used in a great variety of live or permanent applications. Visit pages of the section and discover diagrams illustrating some of the many possibilities offered by Modulo Kinetic and its advanced…
Troubleshooting
Starter guide » Modulo Kinetic Designer 2D and Modulo Kinetic Designer 2D+3D » Troubleshooting
If you have an issue to use Modulo Player Kinetic, read carefully this page: Application doesn’t start and there is no message: First, check on this page that your hardware and software configurations meet the minimum configuration required. Double check that…
Starter guide
Starter guide
Here is the Modulo Kinetic starter guide. Get started with Modulo Kinetic Designer 2D (license for practicing and offline programming) Get started with Modulo Kinetic Designer 2D+3D (license for practicing, offline programming, simulation and creation) Get started…
KineMotion – Tracking
Kinetic Designer: User Interface » All Views » KineMotion – Tracking
In this page, we will introduce the many possibilities offered by KineMotion, the tracking module allowing to obtain real-time estimation of object’s position and rotation. Sub-topics: Main tab Group editor Camera editor Graph Tasks
Introduction
Introduction
Modulo Kinetic, more than a media server Modulo Kinetic is the ultimate video solution tailored for the most challenging projects. This fully-integrated media server with embedded live mixer will be the cornerstone of your complete workflow. Perform study, simulation,…
Companion Apps
Companion Apps
Companion Apps Modulo Kinetic comes with different companion apps designed to further enhance your experience working with the media server: Kinetic Panel: Access your custom user panels on Android or iOS devices, Mac or PC ModuloDMXTool: Send and receive Art-Net…
Warp
Kinetic Designer: User Interface » All Views » Warp
This panel allows you to set the warp of each Output or X-Map WARP Mode Click on to zoom the output to fit the window. Current point: display the position (x,y) ot the current point displayed in red in the window You can select one or several points by mouse…
Embedded Live Mixer and Stream Deck
Webinars – English » Embedded Live Mixer and Stream Deck
Presentation and demo of Modulo Pi’s embedded Live Mixer and Stream Deck: This webinar offers a presentation and demo of the low-latency live mixer embedded in Modulo Player and Modulo Kinetic. It also presents how the full integration of Stream Deck provides…
XR studio with green screen
Application notes » XR studio with green screen
XR studio with green screen Setup relies on: 1 x Modulo Kinetic Designer 1 x Modulo Kinetic V-Node server with 2 outputs Live capture cards (option): - 1 × 12G-SDI or 4 × 3G-SDI - 2 x HDMI 2.0 Tracked cameras: Panasonic AW-UE150 or Stype A powerful,…
Projection study and show simulation
Webinars – English » Projection study and show simulation
3D projection study and show simulation Through this webinar, you will discover our 3D tools for projection study and show simulation. These tools are available through the Modulo Kinetic media server, or using a Modulo Pi dongle equipped with the Modulo Kinetic…
Autocalibration de 5 video projecteurs sur un dome
Tutoriels – Français » Tutoriels de formation » Autocalibration de 5 video projecteurs sur un dome
Modulo Pi intégrère un système un système d’autocalibration dans ses media serveurs. Ce système d’autocalibration peut être utilisé sur des : - Surfaces planes - Surfaces incurvées - Domes Dans cette exercice, nous allons voir comment réaliser…
Autocalibration of 5 video projectors on a dome
Tutorials – English » Training tutorials » Autocalibration of 5 video projectors on a dome
Modulo Pi has an autocalibration solution fully integrated into its media servers. The autocalibration solution can be used when projecting on: - Flat surfaces - Curved surfaces - Dome surfaces In this exercice, we will see how to perform an automatic calibration…
XR studio with LED screen
Application notes » XR studio with LED screen
XR studio with LED screen Setup relies on: 1 x Modulo Kinetic Designer 1 x Modulo Kinetic V-Node server with 4 outputs Live capture cards (option): - 1 × 12G-SDI or 4 × 3G-SDI - 2 x HDMI 2.0 Tracked cameras: Panasonic AW-UE150 or Stype A powerful,…
Dongle issue
Troubleshooting guide » Dongle issue
You installed your application. Your dongle is connected, and you have a Codemeter popup error. You have a Modulo Kinetic Designer 2D license: If you have the following popup, it means you have an issue with the activation of Modulo Kinetic Designer 2D on your…
Etude de projection et simulation de show
Webinaires – Français » Etude de projection et simulation de show
Etude de projection et simulation de show en 3D temps réel A travers ce webinaire, découvrez nos outils dédiés à l’étude de projection et la simulation de show en 3D temps réel. Ces outils sont disponibles via le média serveur Modulo Kinetic, ou en…
Minimum hardware and software configurations
Starter guide » Modulo Kinetic Designer 2D and Modulo Kinetic Designer 2D+3D » Minimum hardware and software configurations
Use your Modulo Pi key and your license on a computer with Windows 7 64 bits or above. Your computer needs to have a dedicated GPU with OpenGL 4.1 minimum for the Modulo Kinetic 2D, and a minimum version 4.5 to use Modulo Kinetic 2D+3D. To check if your computer has…
Edit
Kinetic Designer: User Interface » Main Menu » Edit
Edit You can click on the “Edit” menu to have access to the following actions: Undo: To undo last action. Redo: To rollback last undo action. Supr: To delete the active selection. Cut: To cut the active selection. Copy: To copy the active selection. Paste: To…
Project
Kinetic Designer: User Interface » Main Menu » Project
Click on the “Project” menu to have access to the following actions: Project settings: Open the project settings panel. For more details, follow this link Relink assets…: Search if there is assets not found and open a popup window to help the relink of…
Multi-projector auto-calibration
Multi-projector auto-calibration
Multi-projector auto-calibration system by Modulo Pi Achieve a perfectly warped and blended projection within minutes thanks to Modulo Pi’s auto-calibration solution. Available as an option for the Modulo Player and Modulo Kinetic series of media servers, the…
Tracking to project interactive content with one video projector
Tutorials – English » Training tutorials » Tracking to project interactive content with one video projector
KineMotion is a real-time tracking solution fully developped by Modulo Pi. It can be used to perform dynamic projection mapping, interactive video effects, automatic follow spot, spatial audio, and more. For more information, please check the KineMotion specification…
KineMotion tasks
Kinetic Designer: User Interface » All Views » KineMotion – Tracking » KineMotion tasks
In this section, you will find different tasks that can be used with the tracking module. See section Tasks for more general introduction about tasks. As usual, in order to add a task, you need to drag&drop the object into the task tab. Tasks are available for Groups,…
Projection de contenu en utilisant le tracking
Tutoriels – Français » Tutoriels de formation » Projection de contenu en utilisant le tracking
KineMotion est une solution de tracking en temps réel développée par Modulo Pi. Il peut être utilisé pour faire une projection dynamique, FX interractifs, follow-spot automatique, spatialisation audio, et plus. Pour plus d’information veuillez-vous référer…
Tutorials – English
Tutorials – English
Tutorials – English To support you all the way with Modulo Kinetic, two types of tutorials are available in this user manual: Training tutorials: All steps to work with Modulo Kinetic from scratch Video tutorials: Live demos guiding you through the Modulo…
Network setup
Starter guide » Modulo Kinetic media server » Network setup
You need to check that you are on the same network than your Modulo Kinetic VNode server. When you received your Modulo Kinetic unit, the box included a sheet with the IP address of your media server. If you do not know how to setup an IP: Go on this page for a…
Tutoriels – Français
Tutoriels – Français
Tutoriels – Français Pour vous accompagner dans votre utilisation de Modulo Kinetic, deux types de tutoriels sont présents dans ce manuel : Tutoriels de formation : Toutes les étapes pour apprendre à utiliser Modulo Kinetic from scratch Tutoriels vidéo :…
3D scenes
Kinetic Designer: User Interface » All Views » 3D scenes
On the top of this panel you will find all the elements concerning your 3D scenes Current scene select the 3D scene from the dropdown list edit the 3D scene parameters add a 3D scene delete a 3D scene…
KineMotion – Tracking module
KineMotion – Tracking module
KineMotion, the real-time tracking system by Modulo Pi Available as an option for Modulo Kinetic, KineMotion is an optical tracking solution instrumental in creating state-of-the-art visual environments: Dynamic projection mapping, interactive video effects,…
Audio
Useful Guidelines » Media Creation » Audio
You can read the following audio files: wav, aiff. You can work with mono, stereo or multi-channel audio files. It is recommended that audio files be multiplexed with all channels inside. Modulo-Pi can manage (depending on the sound card) up to 7.1. To read more than…
KineMotion graph blocks
Kinetic Designer: User Interface » All Views » KineMotion – Tracking » KineMotion graph blocks
In this section, you will find different blocks associated with the tracking module. See section Graph Editor for more general introduction about graphs. As usual, in order to add a block, you need to drag&drop the object into the graph editor. Graph blocks are…
V-Nodes
Kinetic Designer: User Interface » Main Menu » V-Nodes
V-Nodes Click on the “V-Nodes” menu to have access to the following actions: Online: Connect Modulo Kinetic Designer to all V-Node server(s) and upload the show and media Online no media sync.: Connect Modulo Kinetic Designer to all V-Node server(s) and the…
Training tutorials
Tutorials – English » Training tutorials
Discover some tutorials to learn using Modulo Kinetic step by step. These tutorials are part of the Modulo Kinetic – Level 1 certification course. In order to do all the exercises, you will need the following: 1 x pico video-projector (reference 1 ; reference…
File
Kinetic Designer: User Interface » Main Menu » File
You can click on the “File” menu to have access to the following actions: Home: Access the Home page. For more details, follow this link New: Create a new modulo kinetic project. Load: Select and load an existing modulo kinetic project. Recent projects:…
KineMotion software
KineMotion – Tracking module » KineMotion software
To find out more about the KineMotion software, please visit this section.
Auto-calibration software
Multi-projector auto-calibration » Auto-calibration software
To find out more about the multi-projector auto-calibration module, please visit this section.
Warp Remote
Companion Apps » Warp Remote
Warp Remote: Thanks to Warp Remote, enjoy a flexible approach to multi-projector edge blending, warping, and 3D calibration. The free application gives access to the V-Node server(s), outputs, X-Map settings and X-Map warping from a PC or laptop. Feel free to get…
Stream Deck
Kinetic Designer: User Interface » Main Menu » Edit » Stream Deck
Stream Deck installation: Go on the Elgato website to download the Stream Deck application. Download and double click on the Modulo Stream Deck plugin (one unified plugin for all Modulo Pi applications supporting Stream Deck, compatible MAC and PC). At the end of…
Version 3.4
Release Notes » Version 3.4
Version 3.4 – September 8, 2020: Drivers: We recommend to use new AMD drivers (Download the last version): For Windows 10: 20Q2.1 For Windows 7: 20Q1 You need to update the Deltacast drivers to 6.15 version (Install the last version). Deltacast DVI cards…
Mixer viewer
Kinetic Designer: User Interface » All Views » Mixer viewer
This view includes all the features of the live mixer To display the destinations in the right outputs just drag and drop them on the timemline and place them in the right rendersurface
Stream Deck
Live Mixer » Stream Deck
Stream Deck installation: Go on the Elgato website to download the Stream Deck application. Download and double click on the Modulo Stream Deck plugin (one unified plugin for all Modulo Pi applications supporting Stream Deck, compatible MAC and PC). At the end of…
Timeline panel
Kinetic Designer: User Interface » All Views » Timeline panel
This panel allows you to Manage the timelines in your show. Click on or double click add a timeline Click on icon delete a timeline Click on focus on the timeline in the Timeline view Left click on …
UI Designer
Kinetic Designer: User Interface » All Views » UI Designer
The User Interface (UI) Designer is a graphic Designer Interface where you can create your own customized interfaces. You can create your own pages to control a show from a computer, a tablet (IOS/Android), or another touch device. You can add as many UI as you…
Media server overview
Introduction » Media server overview
Modulo Kinetic Designer and the VNode server(s) Modulo Kinetic is a hardware + software media server solution. The platform relies on Kinetic Designer, a powerful user interface with a dedicated workstation, connected to one or several VNode media servers. Kinetic…
Uncompressed option
Useful Guidelines » Media Creation » Uncompressed option
uncompressed TGA image sequence ( optional ) For Modulo-Pi servers with the uncompressed option, it is possible to read TGA image sequences directly. For this option, you must prepare a folder with the following name: media-name.tga. This folder should contain the TGA…
Add another camera to the XR scene
Tutorials – English » Training tutorials » Setup a XR studio with a green screen » Add another camera to the XR scene
In this second part of the exercice we will add a new camera to the XR scene, the same camera we used until now the Panasonic AW-UE150 camera. To do so we will repeat the steps we did before for the first camera, and add a new Render Surface for this…
Add another camera to the XR scene
Tutoriels – Français » Tutoriels de formation » Setup a XR studio with a green screen » Add another camera to the XR scene
Dans cette second partie de l’exercice nous allons ajouter une seconde caméra à notre système XR. Nous allons ajouter la même caméra que la première la Panasonic AW-UE150. Pour ce faire, nous allons répéter les mêmes étapes que précédemment, et…
Tutoriels de formation
Tutoriels – Français » Tutoriels de formation
Découvrez des tutoriels pour apprendre à utiliser Modulo Kinetic pas à pas. Ces tutoriels font partie des exercices de la formation certifiante Modulo Kinetic – Niveau 1. Afin de pouvoir réaliser l’ensemble des exercices, vous aurez besoin du…
Drag & drop
Kinetic Designer: User Interface » All Views » UI Designer » Drag & drop
It is possible to add some components from other parts of Modulo Kinetic Designer through a simple drag & drop. Devices: It’s possible to drag some devices in a user interface. Go to devices description to know if the device support the drag & drop in the user…
X-Map-Letter
Tutoriels – Français » Tutoriels de formation » X-Map-Letter
Cet exercice vous guidera dans l’apprentissage de Modulo Kinetic et de ses outils de déformation : Nous allons : Créer un nouveau projet, copier des media, ajouter un output et projeter un media sur trois formes avec une grille classique de…
Version 4.0
Release Notes » Version 4.0
Version 4.0 – May 18, 2021: Release Note In May 2021 and after months of development, Modulo Kinetic makes a major step forward with the release of the version 4. As the biggest release ever, Modulo Kinetic V4 comes with a revamped user interface, a variety of…
X-Map-Letter
Tutorials – English » Training tutorials » X-Map-Letter
This guided exercise will teach you about Modulo Kinetic software and its warping possibilities: You will create a new project, copy media, add an output and try to project a media set on 3 sides of a cube with a classic warping grid. You will create X-Maps…
Blacktrax
Kinetic Designer: User Interface » All Views » Devices » Tracking » Blacktrax
Choose this device to receive tracking information from the Blacktrax solution. Settings: Name User-friendly name Enable Activate to enable the device Run at startup Activate to run the device at Kinetic startup IP…
Create a new show and configure the cameras
Tutorials – English » Training tutorials » Tracking to project interactive content with one video projector » Create a new show and configure the cameras
Check we have only one Modulo Kinetic Designer opened Before moving forward, be sure you only have one Modulo Kinetic Designer opened at the same time. If there is already one or several Kinetic Designers opened, be sure the OptiTrack is disabled in Edit > Preferences…
KineMotion main tab
Kinetic Designer: User Interface » All Views » KineMotion – Tracking » KineMotion main tab
The Tracking tab consists of two main elements allowing the control of tracking groups and cameras. List of tracking elements The left panel of the tracking tab represents a tree view of tracking groups and tracking cameras (see image above) Each tracking group…
Créer un nouveau show et configurer les caméras
Tutoriels – Français » Tutoriels de formation » Projection de contenu en utilisant le tracking » Créer un nouveau show et configurer les caméras
Vérifier que nous n’avons qu’un seul Modulo Kinetic Designer ouvert Avant de continuer, assurez-vous de n’avoir qu’un seul Modulo Kinetic Designer ouvert à la fois. Si plusieurs Kinetic Designers sont ouverts, assurez-vous que la case…
Création et disposition des Destinations dans le Designer
Tutoriels – Français » Tutoriels de formation » X-Map-Letter » Création et disposition des Destinations dans le Designer
Avons d’ouvrir Modulo Mixer nous devons créer trois destinations dans le Designer : Une pour le background Une pour le logo Modulo PI Une pour la forme ronde Créons la destination pour le background La seconde pour le logo : Et la troisième…
KineMotion group editor
Kinetic Designer: User Interface » All Views » KineMotion – Tracking » KineMotion group editor
Group editor is the main control point of the tracking module. It includes the following tabs: General Calib. report Ground calib. Objects Listing Filter General Mode Determines in which mode the group will operate after clicking on Start button .…
Console
Kinetic Designer: User Interface » All Views » Console
This panel display the console. It’s usefull when you have an issue (import issue, connection issue to a VNode,..) Watch this panel to identify issues. You can use the search field to filter, or filter by level of issue (error, info, warning, debug).…
General
Kinetic Designer: User Interface » Main Menu » V-Nodes » Remote Settings » General
This tab is for general settings. Cache folder: Remotely select the cachefolder on your Kinetic Vnode. This folder need to be created and hosted in the Data hard drive of the Kinetic Data drive (D:). This folder will contains all assets automatically synchronized…
3D Materials
Kinetic Designer: User Interface » All Views » 3D scenes » 3D Materials
Kinetic gives you the choice between 4 types of materials to create and simulate any type of surface. From purely aesthetic materials to ultra realistic by way the interactive textures thanks to Substance by Adobe. material panel You can add a standard…
Kinetic Panel
Companion Apps » Kinetic Panel
Kinetic Panel: Once you have created your custom panels in the UI Designer, Kinetic Panel allows to easily access and use the interfaces directly from a Mac, PC, as well as Android and iOS devices. Assign different panels depending on your needs (show control,…
Home page
Kinetic Designer: User Interface » Main Menu » File » Home page
Home By clicking on Home, the Kinetic Designer home screen pops-up. NB: It is the same window that appears when launching the application. On the left you can find 4 icons that give access to several functions. Home On the home page, you can create a new…
Open the Designer project and prepare the calibration
Tutorials – English » Training tutorials » Setup a XR studio with a green screen » Open the Designer project and prepare the calibration
Open the prepared project If you don’t have it yet, download the media kit here Open Kinetic Designer Choose Open and browse into your computer Add the Deltacast HDMI or SDI source In the Media tab, click on and add a Deltacast media Set the…
Live event Part 1
Tutoriels – Français » Tutoriels de formation » Live Event » Live event Part 1
La première partie de cet exercice concerne la création d’un projet complet depuis zéro. Nous aborderons les concepts suivants : La création du projet Le réglage du media serveur ou du laptop en mode Demo La copie de media vers le media serveur La…
Multiple layers superposition
Tutorials – English » Training tutorials » Start project » Multiple layers superposition
Now, let’s make a PIP appear while keeping what plays in the background. Add the media Modulo-Pi-PPT2019 on top of the layer. Scale down this media and position it as you wish and add a 2 seconds fade in and fade out. After the PiP is gone, we keep only…
Live event Part 1
Tutorials – English » Training tutorials » Live Event » Live event Part 1
The first part of the exercise will allow you to create a project from scratch. We will discuss the following concepts in turn: The creation of a project The setting of the Media Server or laptop in Demo version if necessary Copying media to the Media Server The…
Ouvrir le projet Designer et préparer la calibration
Tutoriels – Français » Tutoriels de formation » Setup a XR studio with a green screen » Ouvrir le projet Designer et préparer la calibration
Ouvrir le projet préparé Si vous ne l’avez pas encore, télécharger le media kit ici Ouvrir Kinetic Designer Choisir Open et parcourir le chemin jusqu’à ouvrir le projet MOP Ajout de source Deltacast HDMI ou SDI pour la caméra Dans la…
3D Skeletons
Kinetic Designer: User Interface » All Views » 3D scenes » 3D Skeletons
Rigged models Modulo Kinetic supports most 3d rigged models and their animations. Once the model is imported, you can find the whole hierarchy of the skeleton(s) in the “skeletons” tab. 3d rigged model with skeleton display Bones You can view…
About media filters and spare V-Node
Tutorials – English » Training tutorials » Entire project : Immersive Room Experience » Chapter 2 : Prepare V-Nodes and Render Surfaces for Media » About media filters and spare V-Node
So far, we didn’t espacilly talk about the SOS V-Node. In this project we have one which is V-Node 04. In order to replace any V-Node, this V-Node needs to have all the media. That’s why the we set ON for VN04 on all Media Filters : FILTER name…
3D Viewer
Kinetic Designer: User Interface » All Views » 3D Viewer
Modulo Kinetic integrates a 3D engine allowing you to make simulations, 3D animations, to follow objects in real time, to make reprojections of points of view or to directly create 3D shows. To do so, the software has a tab containing the real-time rendering of the…
Superposition de plusieurs layers
Tutoriels – Français » Tutoriels de formation » Start project » Superposition de plusieurs layers
Nous allons maintenant faire apparaitre un PiP (picture in picture) tout en gardant en arrière plan la vidéo jouer. Ajouter le media Modulo-Pi-PPT2019 par dessus le layer en arrière plan. Réduire la taille du media et le positionner et ajouter un FADE IN et OUT…
Prepare the Destinations in the Designer for the Live Mixer
Tutorials – English » Training tutorials » X-Map-Letter » Prepare the Destinations in the Designer for the Live Mixer
Before going to the Live Mixer application, let’s create three destinations : one for the background screen one for the Modulo PI logo one for the ROUND shape Let’s first create the first for the background screen Then the second one for the Logo…
3D Lights
Kinetic Designer: User Interface » All Views » 3D scenes » 3D Lights
In this panel you have access to the complete list of lights of the scene. Thanks to the toolbar you can add a light, search by name and delete the selected lights. Settings General Visible draws the light source, this does NOT affect the use of the…
Calibrate the cameras in the 3D space
Tutorials – English » Training tutorials » Tracking to project interactive content with one video projector » Calibrate the cameras in the 3D space
Our cameras are ready and added to our project in Modulo Kinetic Designer. Now, we will add and calibrate them in order to place them in the 3D environment. Use the Wand to get points for the calibration Put the Wand onto its stick to make higher movements In…
Add V-Nodes and set it up
Tutorials – English » Training tutorials » Entire project : Immersive Room Experience » Chapter 2 : Prepare V-Nodes and Render Surfaces for Media » Add V-Nodes and set it up
Add V-Nodes Now the video projection study is done, we know we have 9 video projectors so we need 9 outputs, plus one Speakers screen, plus Monitoring Output. We have V-Nodes with 4 outputs graphic cards, so here is the V-Nodes Outputs distribution: Configure the…
Preferences
Kinetic Designer: User Interface » Main Menu » Edit » Preferences
From this pop-up window you can configure: General: Autosave: You can activate the autosave feature. Disable this option when the show is playing. Auto backup: Allow to trigger an automatic backup. Define the recurrence of the auto backup. Interfaces: Theme:…
Software overview
Introduction » Software overview
The Ultimate Video Solution reliable accross the complete workflow Working in close collaboration with show producers, creatives, and technicians all,around the world, we created Modulo Kinetic to help you every step of the way. From show design and simulation to show…
Create a new show and Add devices
Tutorials – English » Training tutorials » Camera AR » Create a new show and Add devices
Create a new project Open Kinetic Designer Choose New and save it to a new folder in the disk D In the medialist, Add a deltacast media Set the deltacast parameters regarding to your configuration (HDMI or SDI and 50 or 60 FPS) Create a Vnode and his…
Ajouter les V-Nodes et les configurer
Tutoriels – Français » Tutoriels de formation » Projet entier : Immersive Room Experience » Chapitre 2 : Préparer les V-Nodes et Render Surfaces pour les Media » Ajouter les V-Nodes et les configurer
Ajouter des V-Nodes Maintenant que l’étude de video projection est faite nous avons que nous avons 9 video projecteurs donc 9 outputs, plus un Speakers screen, plus un Monitoring Output. Nous avons des V-Nodes avec 4 outputs, dont voici la répartition : …
Horizontal mode: Landscape
Useful Guidelines » X-Map creation » Horizontal mode: Landscape
Photo of the calibration pattern : public point of view A photo should be taken from the general point of view. This photo must be adjusted to match the ratio and resolution of our projectors using Photoshop Crop tool. And possibly correct the paralaxes generated…
Calibrer la position des caméras dans la 3D
Tutoriels – Français » Tutoriels de formation » Projection de contenu en utilisant le tracking » Calibrer la position des caméras dans la 3D
Les caméras sont maintenant configurées et ajoutées au projet Modulo Kinetic Designer. Nous allons maintenant calibrer leur position dans l’environnement 3D. Utiliser le Wand (baguette) pour obtenir des points dans l’espace pour la calibration Fixer…
Auto-calibration
Kinetic Designer: User Interface » Main Menu » V-Nodes » Auto-calibration
The goal of auto-calibration consists in obtaining one seamless display composed of multiple outputs like presented on the image below: Setup To perform auto-calibration, you will need the following equipment: Your Modulo Player or Modulo Kinetic media server…