Select this device to control your Christie Digital video-projectors with this device.


Name User-friendly name
Enable Activate to enable the device
Run at startup Activate to run the device at Kinetic startup
IP Enter the ip address of your video projector. Your device and Kinetic Designer need to be in the same subnet
Port: Choose port number. Port. 3002 is the default value (usually doesn’t have to be changed
ID select projector ID

Task action:

Enable device enable the device
Disable device disable the device
Power On send Christie power on command
Power Off send Christie power off command
Shutter On send Christie shutter on command
Shutter Off send Christie shutter off command
Channel select channel number
Channel PIP select channel PIP number
Freeze On send Christie freeze on command
Freeze Off send Christie freeze off command
Freeze PIP On send Christie freeze PIP on command
Freeze PIP Off send Christie freeze PIP off command
Internal Test Pattern choose internal test pattern from the list
PIP On send Christie PIP on command
PIP Off send Christie PIP off command
Picture Mute On send Christie picture mute on command
Picture Mute Off send Christie picture mute off command

Task trigger:


Digimap trigger:




User interface:

You can add this device in any user panel. You can then choose the available features in the panel.

Device information:

Go to the manufacturer website for more information.

Need more help with this?
Don’t hesitate to contact us here.

Thanks for your feedback.