X-Maps – warping

Display a test pattern on the background screen

Then warp the Modulo PI logo:
Since the PSD file has all the elements one after the other, we must bring the shape back into the screen.
Display a red pattern to see the element.
Select all the control points with the “select all” button
Move the everything back into the projection area.

The “rescale” tool is used to reduce the size to a more consistent size.

PI sign:

We will use another method to bring the element back into the screen area.
Go to the MAP tab and choose a value in OUT to bring it back into the projection area.

!When you modify values in this tab, you are actually modifying the default values for when you reset the shape. You must click on configuration, activate the Reset checkbox and confirm so that the new setting is taken into account.

The “rescale” tool is used to reduce the size to a more consistent size.

Apply the same procedure on the ROUND form.

Warping:

Each shape is then warped one by one. You can use the Keystone mode if the surface is flat (this will automatically compensate for parallax) or the curve mode if necessary.