Accelerometer high resolution

Choose this device to connect to a PhidgetSpatial Precision 0/0/3 High Resolution 1043_1B
You can then receive Accelerometer value and use it with a Digimap.

Settings:

Name: User-friendly name
Serial Number: Enter the serial number of this phidget
interval ms: Choose the refresh interval in milliseconds

Task action:

Trigger a task according to the incoming parameter:

Choose the trigger condition:
> trigger the task when the incoming value is superior to the condition value
>= trigger the task when the incoming value is superior or equal to the condition value
< trigger the task when the incoming value is inferior to the condition value
<= trigger the task when the incoming value is inferior or equal to the condition value
= trigger the task when the incoming value is equal to the condition value
range trigger the task when the incoming value is superior to the condition value min and inferior to value max

For all theses conditions, you can set a hysterys value to avoid false triggering.
For example you use the > condition with a value of 0.5, you set an hysterys value of 0.1. When the incoming value reach 0.5, the task is triggered.
If the incoming value go back to 0.45 then go to 0.5, the task is not triggered.
If the incoming value go back to 0.35 (less than condition value – hystererys value) then go to 0.5, the task is triggered.

Task trigger:

N/A

Digimap trigger:

Select the accelerometer axis X or Y or Z.

User interface:

You can add this device in any user panel.
You can then choose the available features in the panel.

Device information:

Go to this page for more information.