Papago 2TH

Choose this device to monitor a temperature/humidity sensor Papago 2TH

Settings:

Name: User-friendly name
IP: Enter the ip address of your device. Your device and Modulo Player need to be in the same subnet

Monitor directly the temperature and humidity in this panel.

Task action:

N/A

Task trigger:

Trigger a task according to the incoming parameter (can be temperature, humidity or dew point):

Choose the trigger condition:
> trigger the task when the incoming value is superior to the condition value
>= trigger the task when the incoming value is superior or equal to the condition value
< trigger the task when the incoming value is inferior to the condition value
<= trigger the task when the incoming value is inferior or equal to the condition value
= trigger the task when the incoming value is equal to the condition value
range trigger the task when the incoming value is superior to the condition value min and inferior to value max

For all theses conditions, you can set a hysterys value to avoid false triggering.
For example you use the > condition with a value of 0.5, you set an hysterys value of 0.1. When the incoming value reach 0.5, the task is triggered.
If the incoming value go back to 0.45 then go to 0.5, the task is not triggered.
If the incoming value go back to 0.35 (less than condition value – hystererys value) then go to 0.5, the task is triggered.

Digimap trigger:

N/A

User interface:

You can add this device in any user panel.
You can then choose the available features in the panel.

Device information:

Go to the manufacturer website for more information.