Search
Related topics are listed below.
Voltage output
Modulo Player Remote » Devices tab » Phidgets » Voltage output
Choose this device to connect to a Phidgets voltage output using a VINT HUB Phidget. Settings: Name: User-friendly name Serial Number: Enter the serial number of the VINT HUB Phidget Port: Choose the port Interval ms: Choose the refresh interval in milliseconds Task…
Création output
Tutoriels – Français » Tutoriels de formation » Projection mapping » Création output
Dans l’onglet General, vérifiez que le Desktop resolution est correctement réglé sur 1920×1080. Renommez votre serveur et attribuez lui une couleur pour ce projet. Vérifiez que votre Pixel Workspace est correctement réglé sur 1920×1080. Dans…
Output settings
Modulo Player Remote » Outputs tab » Output settings
To manually create an output, click on the button. You can edit the name of your output. Then, adjust the part of the pixel workspace you want to display in this output, as well as the position and resolution of your output in your desktop. Map: Adjust the…
Digital output
Modulo Player Remote » Devices tab » Phidgets » Digital output
This device is a generic digital output. You can for example use the output of a VINT HUB Phidget Settings: Name: User-friendly name Serial Number: Enter the serial number of the VINT HUB Phidget Port: Choose the port interval ms: Choose the refresh interval in…
Output creation
Tutorials – English » Training tutorials » Projection mapping » Output creation
In the General tab, check that the Desktop resolution is correctly set to 1920×1080. Set a name and color to your server for this project. Check that the Pixel Workspace is correctly set to 1920×1080. In the Output tab, create a new Standard output. Leave…
Output creation
Tutorials – English » Training tutorials » Live Event » Live event : Starting the project » Output creation
Cyclo screen We will use the wizard to create the first two outputs with an overlap. Click on the Wizard button, and in the Wizard Output window, set the following: Projector resolution : 1920×1080 Nb outputs : 2×1 Horizontal overlap : 384…
Création playlist et warp basiques
Tutoriels – Français » Tutoriels de formation » Projection mapping » Création playlist et warp basiques
Ouvrez l’onglet Playlist et ajoutez 2 cues. Laissez le cue 1 vide pour assurer un état initial neutre et un preload du cue 2 lorsque le projet sera lancé. Sur le cue 2, ajoutez le média Cube_Pattern1.png sur la layer 1 avec un fade in de 2 secondes, puis…
Playlist creation and basic warp
Tutorials – English » Training tutorials » Projection mapping » Playlist creation and basic warp
Open the Playlist tab and add 2 cues. Leave Cue 1 empty to insure a neutral state and a preload of cue 2 when the project is launched. On cue 2, add the Cube_Pattern1.png media to layer 1 with a fade in of 2 seconds, and launch the cue. The pattern should be…
Ajouter un output
Tutoriels – Français » Tutoriels de formation » Start project » Ajouter un output
L’onglet Output est utilisé pour créer et configurer différents outputs qui seront utilisés pour mapper différentes parties de votre Pixel Workspace vers différentes régions de la fenêtre principale du serveur Modulo Player que nous avons configurée avec…
Add an output
Tutorials – English » Training tutorials » Start project » Add an output
The Output tab is used to create and configure different outputs which will be used to map different parts of your Pixel Workspace to different areas of Modulo Player’s main window displaying as set using the Display Mode in the first step. You can find more…
Isolated 16-bit voltage output
Modulo Player Remote » Devices tab » Phidgets » Isolated 16-bit voltage output
Choose this device to connect to a Phidgets Isolated 16-bit voltage output OUT1002_0 Generating extremely precise voltages is easy with this Phidgets voltage output module. It is designed to interface with devices that are controlled by an analog voltage signal.…
Outputs tab
Modulo Player Remote » Outputs tab
This tab allows you to set up the media server’s outputs. This tab is only accessible when the media server application is already running (green indication). Two different types of outputs can be created: A video output: To use on a screen, LED wall, or a…
X-Map
Modulo Player Remote » Outputs tab » X-Map
For the most complex shapes, our exclusive X-Map function will help you save time and money. Most of the mappings on our Showcase gallery are done using this smart and user-friendly feature. When having different levels of depth on your projection surface or a…
X-Map manuel
Tutoriels – Français » Tutoriels de formation » Projection mapping » X-Map manuel
Les X-Maps vous permettent de découper des parties de votre output pour les warper indépendamment. En utilisant des X-Maps nous pourrons warper les 3 côtés de notre cube indépendamment. Dans l’onglet Shape, ouvrez la fenêtre Configuration et réglez le…
X-Map – By hand
Tutorials – English » Training tutorials » Projection mapping » X-Map – By hand
X-Maps enable you to cut out portions of your outputs and warp them independently. By using X-Maps we will be able to warp all 3 sides of the cube independently. In the Shape subtab, open the Configuration window and set the Curve type back to Keystone and select…
Horizontal mode: Landscape
Useful Guidelines » X-Map creation » Horizontal mode: Landscape
Photo of the calibration pattern: Public point of view A photo should be taken from the public point of view. This photo must be adjusted to match the ratio and resolution of our projectors using Photoshop Crop tool. And possibly correct the paralaxes generated during…
Auto-calibration
Modulo Player Remote » Outputs tab » Auto-calibration
The objective of autocalibration is to easily obtain one seamless display with multiple video projectors as presented in the image below: Result of an autocalibration with 5 projectors on a dome. Autocalibration can be used with the following screen setups: flat,…
X-Map – PSD import
Tutorials – English » Training tutorials » Projection mapping » X-Map – PSD import
We will now see how to use a Photoshop PSD file to automatically create X-Maps. Select the current output previously created and delete it by clicking on the button in the top right of the interface. Create a new output by clicking on the Import PSD button. A…
Perform the autocalibration
Tutorials – English » Training tutorials » Autocalibration of 5 video-projectors on a dome » Perform the autocalibration
*Before moving forward, we remind you that all lights – natural or artificial – need to be turned off or hidden. Indeed, any reflection in the room can mar the autocalibration operation. On the Output page click on Autocalib. The autocalibration…
Multi-projector auto-calibration
Multi-projector auto-calibration
Description Achieve a perfectly warped and blended projection in minutes with Modulo Pi’s autocalibration solution. Available as an option for the Modulo Player and Modulo Kinetic series of media servers, the autocalibration feature is designed to automatically…
Add background
Tutorials – English » Training tutorials » Projection mapping » Add background
We will now project another media on the background behind the cube using the same projector. Open the General tab and increase the Pixel Workspace from 1920×1080 to 3840×1080. Open the Output tab and select the Main map above X-MAP1. Then add another…
Projection mapping
Tutoriels – Français » Tutoriels de formation » Projection mapping
Ce second exercie permet de voir plus en détails les possibilités de warping de Modulo Player. Cet exercice couvrira : Création de projet et transfert de médias Projection de différents médias sur 3 côtés d’un cube en utilisant une grille de warp…
Réaliser l’autocalibration
Tutoriels – Français » Tutoriels de formation » Autocalibration de 5 video projecteurs sur un dome » Réaliser l’autocalibration
*Avant de continuer, assurez-vous d’avoir caché ou éteind toute lumière qui pourrait parasiter la calibration. Éviter également toute réflexion de lumière dans la pièce. Depuis le Menu, open V-Nodes > Autocalibration. L’autocalibration est en…
X-Maps warping
Tutorials – English » Training tutorials » Architectural video mapping » X-Maps warping
First, import the Photoshop PSD file. Then go to the Media tab and click on the “refresh” button to load the media previously copied into the show. Then, go to the Playlist tab. Add cues, leave the cue 1 empty. Load the test Pattern into cue 2 You can…
Digimap tab
Modulo Player Remote » Digimap tab
The Digimap tab allows you to take control of some playlist parameters from a sensor or an external device. This way, you can add interactivity to your show. For instance, you can move a panel on a stage (with the projection moving along with it). You can…
Digimap-interactive panel
Tutorials – English » Training tutorials » Workshop » Digimap-interactive panel
We will use a sensor to track the movement of a panel and project content positioned on it. We will see how the sensor is used to move a panel and track the media on it. We will then see how to make an x-ray effect to reveal an image. We will finally see how to use…
X-Maps – warping
Tutorials – English » Training tutorials » X-Map-Letter » X-Maps – warping
Display a test pattern on the background screen Then warp the Modulo PI logo: Since the PSD file has all the elements one after the other, we must bring the shape back into the screen. Display a red pattern to see the element. Select all the control points with…
Software overview
Introduction » Software overview
Intuitive software Modulo Player works with a dedicated Modulo Player Remote, a control software designed to optimize setup, workflow management, and show control. No matter the number of media servers, one Modulo Player Remote is used to work on the server(s)…
Barco PDS
Modulo Player Remote » Devices tab » Switchers » Barco PDS
Choose this device to control Barco PDS series. Settings: Name: User-friendly name IP: Enter the ip address of your device. Your device and Modulo Player need to be in the same subnet Port: TCP/IP port. 3000 is the default value (usually doesn’t have to be…
X-Map creation
Useful Guidelines » X-Map creation
In this topic, we will see how to create a Photoshop file in order to use it in the Modulo Player. To do this, we will start from an example of projection on a facade with 2 HD video projectors. Depending on the methodology used to create images, there are two options…
Properties
Modulo Player Remote » Playlist tab » Layer settings » Properties
From here you can setup the geometry of your media: • Position: Enter the position of your media • Anchor mode: Choose the anchor mode: Type the start position in pixels, or configure it in relation to the pixel Worskpace. Center the center of the media on…
Monitoring
Tutorials – English » Training tutorials » Live Event » Live event : Starting the project » Monitoring
We will use the monitoring to display the PGM and the 4 outputs. Click on the button to add a a monitoring preset. Leave the default values for Out and Size : top left: 0,0 and resolution 1920×1080. Set the number of Rows to 3. In the first row, drag &…
Setup of EDID and Eyefinity
Tutorials – English » Training tutorials » Live Event » Project transfer on the Media Server » Setup of EDID and Eyefinity
Let’s force the 4 outputs with an EDID and do eyefinity to have an desktop extended over 4 screens. Check that the outputs are correctly configured in the output tab (if you have done the initial setup on a single screen, the resolution of the outputs has been…
Copy/Paste
Modulo Player Remote » Outputs tab » Copy/Paste
Use the copy/paste button to copy the settings of one output or X-Map to another. First select the reference output, then click on the special copy&paste button. You can select the target outputs and the properties you want to copy.
Création des outputs
Tutoriels – Français » Tutoriels de formation » Live Event » Live event : Lancement du projet » Création des outputs
Cyclo Nous allons utiliser le wizard pour créer les deux premières sorties avec recouvrement. Cliquez sur le bouton Wizard, et dans la fenêtre Wizard Output, réglez les paramètres comme suit : Projector resolution : 1920×1080 Nb outputs :…
Monitoring
Tutoriels – Français » Tutoriels de formation » Live Event » Live event : Lancement du projet » Monitoring
Nous allons utiliser le monitoring pour afficher le PGM et les 4 outputs. Cliquez sur le bouton pour ajouter un preset de monitoring. Laissez les valeurs par défaut pour Out et Size : top left : 0,0 et résolution 1920×1080 Réglez le nombre de Rows sur…
Monitoring tab
Modulo Player Remote » Monitoring tab
The Monitoring tab is where you can setup a confidence screen to monitor live inputs, outputs and Program in a mosaic view. You can use one of the media server physical outputs to display the monitoring, or you can stream your confidence screen in NDI. If you…
X-Map import PSD
Tutoriels – Français » Tutoriels de formation » Projection mapping » X-Map import PSD
Nous allons maintenant utiliser un fichier Photoshop PSD pour créer automatiquement les X-Maps. Sélectionnez l’output précédemment créé et supprimez le à l’aide du bouton en haut à droite de l’interface. Créez un nouveau output en…
TCP ModBus Analog
Modulo Player Remote » Devices tab » GPIO & power switch » TCP ModBus Analog
Choose this device to control analog outputs and mesure analog values using Modbus with this device ADAM-6224 Settings: Name: User-friendly name IP: Enter the ip address of your device. Your device and Modulo Player need to be in the same subnet Port: TCP/IP port.…
OSC
Modulo Player Remote » Devices tab » Control » OSC
This device allows you to receive or send OSC message. Settings: Name: User-friendly name Input Enable: Enable or disable input Input Port: 8000 is the default value (usually doesn’t have to be changed) Output Enable: Enable or disable output Output IP: Enter the…
TCP ModBus IO
Modulo Player Remote » Devices tab » GPIO & power switch » TCP ModBus IO
Control any TCP/IP Modbus GPIO. Name: User-friendly name IP: Enter the ip address of your device. Your device and Modulo Player need to be in the same subnet Port: TCP/IP port. 502 is the default value (usually doesn’t have to be changed) Type: Choose the…
MIDI
Modulo Player Remote » Devices tab » Control » MIDI
This device allows you to receive or send MIDI event and receive MTC MIDI Timecode. You need to add a USB external MIDI interface to use this device. Settings: Name: User-friendly name Input Enable: Enable or disable input Input Port: Choose Input port from…
Presets
Live Mixer » Presets
You can create any number of Presets. The Preset allows you to store layers settings to recall to Program or Preview. You can additionnaly store a recall of a task. Click on the + button to add new Preset in your project: It will create a Preset with the content…
DMX
Modulo Player Remote » Devices tab » Control » DMX
This device allows you to receive or send DMX via Art-Net protocol. Settings: Name: User-friendly name Input Enable: Enable or disable Input Input universe and subnet: Choose the input universe and subnet Output Enable: Enable or disable output Output universe and…
Playlists creation
Tutorials – English » Training tutorials » Live Event » Live event-Multi playlists / User interface » Playlists creation
The creation and use of several Playlists We will now add several playlists in order to be able to launch different content in independent ways. Click on the + button and add 4 playlists. We will now rename the playlists and add a color to make them easier to…
DisplayPort Adapter
Hardware » DisplayPort Adapter
DP to DVI or HDMI : You need to use active adapters to convert from DisplayPort to another format (for example HDMI or DVI). To avoid tearing in the video ouputs, please make sure you only use one type of adapters per server (the exact same type of adapter for every…
Version 5.3
Changelog » Version 5.3
v5.3.0 New: - Autocalibration for flat/curved screens and domes, see this topic for details - NDI 4.1 Bug fix: - Ephemeris device
Digimap – Panneau interactif
Tutoriels – Français » Tutoriels de formation » Workshop » Digimap – Panneau interactif
Nous allons utiliser un capteur pour suivre le déplacement d’un panneau et projeter un contenu calé sur ce dernier. On va voir l’utilisation du capteur pour déplacer un panneau et faire suivre le média sur ce panneau en mouvement. On verra ensuite…
GPU
Modulo Player Remote » Control » GPU
This panel is divided in two tabs: EDID and Eyefinity tabs. !If you use the try&learn version on your notebook, some features won’t be available (hardware dependant). It’s not possible to use the EDID, Eyefinity. EDID: This tab allows you to remotely…
Digital 4 outputs
Modulo Player Remote » Devices tab » Phidgets » Digital 4 outputs
Choose this device to connect to a Phidgets 4 digital outputs OUT1100_0 If the 3.3V digital output mode of your hub’s VINT port is not powerful enough, or if you just need more digital outputs, this cost-effective output module has you covered. This board…
Vertical mode: Portrait
Useful Guidelines » X-Map creation » Vertical mode: Portrait
If you plan to use your projectors in a vertical position, simply create vertical shapes in Photoshop OUTPUT folder, taking care to keep your projector’s aspect ratio. All the recommendations seen previously remain the same. You can download the PSD file here…
Préparer Modulo Player pour la calibration
Tutoriels – Français » Tutoriels de formation » Autocalibration de 5 video projecteurs sur un dome » Préparer Modulo Player pour la calibration
!Avant de poursuivre, assurez-vous que le logiciel contrôlant la caméra est fermé, sinon Modulo Player ne pourra pas communiquer correctement avec la caméra. Dans ce chapitre nous allons préparer le logiciel Modulo Player pour la calibration. Important :…
Adjusting the Pixel Workspace
Tutorials – English » Training tutorials » Live Event » Live event : Starting the project » Adjusting the Pixel Workspace
Open the General tab and rename your show Live Event 1. If you are connected to a real Modulo Player server, you can check in the info area that the Windows desktop is correctly configured as an extended desktop with a full resolution of 7680×1080. Pixel…
Ajustement de l’Espace Pixellaire
Tutoriels – Français » Tutoriels de formation » Live Event » Live event : Lancement du projet » Ajustement de l’Espace Pixellaire
Ouvrez l’onglet General et renommez votre show Live Event 1. Si vous êtes connecté à un serveur Modulo Player, vous pouvez vérifier dans la zone info que le bureau Windows est correctement configuré en bureau étendu avec une résolution totale de…
LED Mapping
Modulo Player Remote » Outputs tab » LED Mapping
Use the LED mapping feature to convert a video to several Art-Net universe using the fast GPU in real-time. To add a LED Mapping, click on the button and choose LED mapping on the popup menu. A new LED Mapping output is then created. *A LED mapping output counts…
Prepare Modulo Player for the calibration
Tutorials – English » Training tutorials » Autocalibration of 5 video-projectors on a dome » Prepare Modulo Player for the calibration
!Before continuing, take care that the software controlling the camera is closed, otherwise Modulo Player will not be able to communicate with the camera. In this chapter we will prepare Modulo Player for the calibration. Important License information *Info: The…
Version 5.6
Changelog » Version 5.6
Version 5.6 – March 15, 2023: This release is one of the last versions to support Windows 7. Drivers: We recommend to use new AMD drivers (Download the last version): For Windows 10: 22Q2.2 For Windows 7: 20Q1 You need to update the Deltacast drivers to…
Optimize the calibration with the parameters
Tutorials – English » Training tutorials » Autocalibration of 5 video-projectors on a dome » Optimize the calibration with the parameters
After the calibration, we might observe that one or several projectors’ pictures are not perfectly adjusted with the others. First, check that there was no undesirable lights and nothing moving in front of the camera while you were performing the…
Start project
Tutorials – English » Training tutorials » Start project
In this first exercise we will discover the Modulo Player software and learn the workflow of a project. We will learn to: Configure the settings for demo mode and for a real server Create the project folder Transfer Media Create a new show Create an output and…
Start project
Tutoriels – Français » Tutoriels de formation » Start project
Ce premier exercice va permettre de découvrir le logiciel Modulo Player et de prendre en main le workflow d’un projet. Nous allons apprendre les notions suivantes : Réglage des settings en mode démo et sur un vrai serveur Création du dossier…
Live Mixer
Live Mixer
Embedded Low-Latency Live Mixer As a world’s first, Modulo Player embeds a low-latency live mixer with all main functionalities of a mixer: Live program, preview, and confidence screens, presets management, transition effects,… Modulo Player is a multi-user…
Paramétrage EDID et Eyefinity
Tutoriels – Français » Tutoriels de formation » Live Event » Portage du projet sur le média serveur » Paramétrage EDID et Eyefinity
On va maintenant forcer les 4 sorties avec une EDID et on fait le Eyefinity pour avoir un bureau étendu sur 4 écrans. On vérifie que les outputs sont correctement configurées dans l’onglet Output. Si on a fait le setup initial sur un seul écran, la…
Destinations
Live Mixer » Destinations
Destinations You can create any number of Destinations. Each Destination can have any number of Mix/Engine (ME). Each Mix/Engine is composed of two layers than can crossdfade from Preview to Program. Click on the +Dest button to add new Destination in your…
Retake the autocalibration on an existing installation
Tutorials – English » Training tutorials » Autocalibration of 5 video-projectors on a dome » Retake the autocalibration on an existing installation
If you have a system of projectors and servers in place, like in a permanent installation, you may want to retake the actual autocalibration. For instance, after a video projector is replaced, you simply need to operate the autocalibration with the same parameters you…
Projection on moving screen with Digimap
Application notes » Projection on moving screen with Digimap
Projection on moving screen with Digimap function Set-up relies on: 1 x Modulo Player Pro with 1 output User-friendly and flexible management: Free Remote Control Software compatible with Mac/PC Show control: In this example, control of the videoprojector (internal…
New show creation
Tutorials – English » Training tutorials » Start project » New show creation
General tab The General tab is used to configure global settings on your current Project that will be used when the Modulo Player server is launched with the current Project Folder configured. You can find more details on this tab in the General tab manual…
NDI source
Modulo Player Remote » Media tab » NDI source
You can now add a NDI source. This allows you to stream sources using the NewTek protocol over IP. Modulo Player detects automatically all NDI sources in the same network. You can download serveral NDI applications. For more information please visit official NDI…
Modulo Player
Modulo Player Remote » Devices tab » Modulo Pi » Modulo Player
Choose this device to control the Modulo Player application (internal action). Refer to Modulo Player external control if you want to control another Modulo Player. Settings: Name: User-friendly name Task action: Go cue Go Cue or Play Go Previous Cue Go Next…
Isolated 32 LED
Modulo Player Remote » Devices tab » Phidgets » Isolated 32 LED
Choose this device to connect to a Phidgets 32 isolated led outputs LED1000_0 Light up your world with this 32-output dimmable LED controller. Precise control of your LEDs has never been easier, and it only takes one VINT port on your hub. Settings: Name:…
Version 5.4
Changelog » Version 5.4
Version 5.4 – September 7, 2020: Drivers: We recommend to use new AMD drivers (Download the last version): For Windows 10: 20Q2.1 For Windows 7: 20Q1 You need to update the Deltacast drivers to 6.15 version (Install the last version). Deltacast DVI cards…
Isolated solid state relay 16 outputs
Modulo Player Remote » Devices tab » Phidgets » Isolated solid state relay 16 outputs
Choose this device to connect to a Phidgets isolated solid state relay 16 outputs REL1101_0 For applications that require a ton of outputs, this module is the one you’re looking for. With sixteen PWM-enabled relay outputs, it can be used to control devices…
Isolated digital 4 inputs
Modulo Player Remote » Devices tab » Phidgets » Isolated digital 4 inputs
Choose this device to connect to a 4x Isolated Digital Input Phidget DAQ1300_0 Looking to add some serious digital inputs to your VINT Hub? This module has four active-high digital inputs ideal for reading switches, buttons, digital sensors, and other devices with…
General tab
Modulo Player Remote » General tab
This tab is accessible only if the media server application is currently running (green icon). The General tab is divided in 3 parts: Top menu, information, and media server’s global settings. Top Menu: The top menu allows you to Create, Load, Save, Save As,…
Ajout d’un background
Tutoriels – Français » Tutoriels de formation » Projection mapping » Ajout d’un background
Nous allons maintenant projeter un contenu indépendant sur le fond derrière le cube en utilisant le même projecteur. Ouvrez l’onglet General et agrandissez le Pixel Workspace de 1920×1080 à 3840×1080. Ouvrez l’onglet Output et…
Advanced
Modulo Player Remote » Playlist tab » Layer settings » Advanced
In this tab, enable advanced features for the selected layer. Enable the features by clicking on the blue checkbox button. Advanced features are: Color, Mask, Crop, Clip, Border, Drop Shadow, Frame Edit. Color: Adjust the color levels for the selected layer. You…
Version 5.2
Changelog » Version 5.2
Global: Integration of Stream Deck to recall Tasks Updated icons and cleanup Auto-backup options Possibility to directly set default IP and media server name from remote Right click on color editor for cues, tasks,…: Open a color dialog box Media ID: new dialog…
Art-Net light steering
Tutorials – English » Training tutorials » Workshop » Art-Net light steering
We will use the Dmx device (Art-Net) to drive 2 PARS RGB. !It is imperative there’s only one person working on the same universe and subnet. If several people send Art-Net on the same Subnet/Universe, everything will get mixed-up and the result will be…
Création de sources
Tutoriels – Français » Tutoriels de formation » Live Event » Live event – Multi-playlists / User interface » Création de sources
Création de sources live NDI, compteur et texte : NDI: Nous allons maintenant déclarer des média live NDI pour capturer des sources streamées avec le protocole NDI de NewTek . Ce protocole permet de transporter des flux vidéos en utilisant un réseau TCP/IP…
Sources creation
Tutorials – English » Training tutorials » Live Event » Live event-Multi playlists / User interface » Sources creation
Creation of NDI Live sources, counter and text: NDI: We will now declare NDI Live Media to capture streamed sources with the “NewTek NDI” protocol: https://fr.newtek.com/ndi/ . NDI Info click here This protocol allows video streams to be transported using…
Optimiser les paramètres de la calibration
Tutoriels – Français » Tutoriels de formation » Autocalibration de 5 video projecteurs sur un dome » Optimiser les paramètres de la calibration
Après la calibration, vous pourriez constater que l’image d’un ou plusieurs projecteurs ne sont pas parfaitement ajustés avec l’image du projecteur voisin. Premièrement, vérifier qu’aucune lumière indésirable n’est venu gêner, et…
Magnetic sensor
Modulo Player Remote » Devices tab » Phidgets » Magnetic sensor
Choose this device to connect to a Phidgets Magnetic sensor ID: 1108_0 The 1108 is a hall-effect sensor that provides a voltage output that is proportional to the applied magnetic field. Settings: Name: User-friendly name Serial Number: Enter the serial number…
Server setup
Tutorials – English » Training tutorials » Live Event » Live event : Starting the project » Server setup
If you are working in demo mode on a laptop, we will use the second screen to display the monitoring, which we will configure to display all our outputs. If you have access to a real Modulo Player server, you can use its 4 outputs to fully simulate the live event.…
Deltacast
Modulo Player Remote » Media tab » Deltacast
You can use a Deltacast capture card in order to capture a HDMI or HD-SDI, on SDI, DVI video stream. You can handle it as a media. For HD-SDI input board type: Configure settings in order to display media from the acquisition cards. Name: Assign a name in order to…
Voltage input 8 in
Modulo Player Remote » Devices tab » Phidgets » Voltage input 8 in
Choose this device to connect to a 8 Voltage Input Phidget DAQ1000_0 For applications where you just need a lot of sensors, the 8x Voltage Input Phidget adds eight 0-5V analog inputs to your VINT Hub (See the Connection & Compatibility tab for a list of Hubs). Each…
Basic setup and start of Modulo Player Lite
Starter guide » Modulo Player Lite » Basic setup and start of Modulo Player Lite
Your Modulo Pi key is activated, your Modulo Player Lite and Modulo Player Remote are installed. Now, it’s time to play! Firewall and antivirus: First, check that your antivirus will not prevent the applications to launch or to communicate. Usually, an…
Media tab
Modulo Player Remote » Media tab
The Media tab lists all media available on the project folder and subfolders. NB: Refer to the Media Creation page for codec and format specifications. Media can be either in sub-folders or in the base folder of your project. The non-compressed server versions…
OSC
Tutorials – English » Training tutorials » Workshop » OSC
The OSC protocol OSC is the acronym for Open Sound Control. This protocol was created to send orders between different applications using the network, a bit like MIDI but more flexible. Many software programs support this protocol and it is therefore a simple way to…
Sources
Live Mixer » Sources
You can create any number of sources. Click on the + button to add new source in your project. Click on the button to delete a source. Click on this button to visualize live thumbnail stream. You can directly freeze/unfreeze a source in the list. You can…
Control Modulo Player with Art-Net
Tutorials – English » Training tutorials » Workshop » Control Modulo Player with Art-Net
The Modulo Player can be easily controlled by using the Art-Net protocol to receive commands from a light console, for example. There are 3 ways to control it: DMX trigger triggering a task, patch a DMX value to a playlist parameter or X-Map using a digimap, or use the…
OSC
Tutoriels – Français » Tutoriels de formation » Workshop » OSC
Le protocole OSC L’OSC est l’acronyme de Open Sound Control. Ce protocole a été créé pour envoyer des ordres entre différentes applications en utilisant le réseau, un peu sur le même principe que le MIDI, mais avec plus de flexibilité. De nombreux…
Contrôle de Modulo Player en Art-Net
Tutoriels – Français » Tutoriels de formation » Workshop » Contrôle de Modulo Player en Art-Net
On peut contrôler facilement Modulo Player en utilisant le protocole Art-Net pour recevoir par exemple des commandes venant d’une console lumière. On peut être contrôlé de 3 manières : trigger DMX déclenchant une task, patch d’une valeur DMX vers un…
Playlist Overview
Modulo Player Remote » Playlist tab » Playlist Overview
Global Overview: At the top of the page, underneath the general menu bar, choose the playlist you want to edit (tabs) (cf ). You can create a new playlist clicking on the button (cf ) . If you want to delete a playlist, shuffle playlists order, or rename a…
Timecode
Tutorials – English » Training tutorials » Workshop » Timecode
This workshop will allow you to synchronize a playlist on timecode. Timecode: Timecode is used to synchronize several techniques (e.g. video server media, sound player and lighting console together) in a show. In general, one device is the master (it generates the…
Timecode
Tutoriels – Français » Tutoriels de formation » Workshop » Timecode
Cet atelier va vous permettre de synchroniser une playlist sur du timecode. Timecode : On utilise du timecode pour synchroniser plusieurs techniques entre elles dans un spectacle, par exemple média serveur vidéo, player son et console lumière. En général, un…
Video
Useful Guidelines » Media Creation » Video
General This page will guide you through the best practice to ensure optimal quality when encoding video to playback on our servers. Supported codecs Our media servers can decode the following video codecs : MPEG-2 H.264 : See our guide to encode in H.264 HAP…