Select this device to control your Optoma video projectors.
Settings
| Property | Default | Description |
|---|---|---|
| Name | Optoma | User-friendly name. |
| IP | [empty] | Enter the IP address of your device. Your device and Remote should be on the same subnet. |
| Port | 23 | TCP/IP port used by the device. |
Task action
| Action | Description |
|---|---|
| Power On/Off | Toggle the power on the projector |
| Shutter On/Off | Toggle the shutter |
| Channel | Select the input for the video signal |
| Freeze On/Off | Toggle the freeze on the input signal |
| Internal Test pattern | Select an internal test pattern to output |
| Focus increase/decrease | Adjust the focus value more or less |
| Zoom increase/decrease | Adjust the zoom value more or less |
| Horizontal shift | Adjust the horizontal shift value more or less |
| Vertical Shift | Adjust the vertical shift value more or less |
| Aspect Ratio | Set the aspect ratio on the output |
Task trigger
This device has no actions that can trigger a Task.
Digimap trigger
This device has no actions that can trigger a Digimap.
User interface
When drag & dropped into a UI Panel the following commands are available:
Manual controls of the Optoma device in the Editor panel.Device information
Check Optoma’s website for more information on their video projectors.
Need more help with this?
Don’t hesitate to contact us here.