Choose this device to control Barco PDS series.


Name User-friendly name
Enable Activate to enable the device
Run at startup Activate to run the device at Kinetic startup
IP Enter the ip address of your device. Your device and Kinetic Designer need to be in the same subnet
Port Choose port number. Port. 3000 is the default value (usually doesn’t have to be changed)

Task action:

Enable device enable the device
Disable device disable the device
Take send take command
Set transition time set transition time in seconds
Select Input select input index
Go Program Black On enable black on program
Go Program Black Off disable black on program
Freeze On enable freeze
Freeze Off disable freeze
Set Output RasterBox Program On enable rasterbox on program
Set Output RasterBox Program Off disable rasterbox on program
Set Output RasterBox Pvw On enable rasterbox on preview
Set Output RasterBox Pvw Off disable rasterbox on preview

Task trigger:


Digimap trigger:




User interface:


Device information:

Go to the manufacturer website for more information.

Need more help with this?
Don’t hesitate to contact us here.

Thanks for your feedback.