Choose this device to send and receive UDP packet to/from other devices.


Name User-friendly name
Enable Activate to enable the device
Run at startup Activate to run the device at Kinetic startup
IP Enter your device ip address . Your device and Kinetic Designer need to be in the same subnet
Port Choose the correct UDP port

Task action:

Enable device enable the device
Disable device disable the device
Send Command you have to enter the ASCII character string you want to send *

Task trigger:

You can trigger a task sending an ASCII string.
You need to enter the same ASCII command in the message field.

Digimap trigger:

You can trigger a digimap sending an ASCII command.
The syntax is : name_of_your_command?value
name_of_your_command: string
value: float
For example, it can be /modulo/x?124.213: You then choose the message /modulo/x and you will receive the value 124.213 in your Digimap.

You need to enter the name of your ASCII command in the message field.


Receive value receive value from tcp device
Send message send message on tcp device

User interface:


Device information:

To test your device you can use this free tools.

Need more help with this?
Don’t hesitate to contact us here.

Thanks for your feedback.